Kasco 243609 Shallow Water Kit Instruction Manual
- June 17, 2024
- Kasco
Table of Contents
Kasco 243609 Shallow Water Kit
Product Information
Specifications :
- Product Name : Shallow Water Install Kit
- Model Number : Kit 243609
- Designed for : Dock-mounted AquatiClear units
- Function : Eliminates noise at the water’s surface by disrupting whirlpools
- Recommended Installation Depth: At least 8 inches below the water’s surface
Product Usage Instructions
- Attach the swivel clasp to the disc.
- Slip the looped end of the rope over the top of the pipe so that it rests just above the Simple Swivel bracket.
- Drop or lower the disc to the surface of the water.
- Adjust the length of the rope until there is only a little slack and tighten the tensioner to secure the loop just above the Simple Swivel bracket.
Note: To prevent unwanted noise, ensure that the Aquati Clear unit is installed at least 8 inches below the water’s surface. When in operation, the disc will be pulled toward the whirlpool to float just above it.
DOCUMENT #243610 800 Deere Rd. Prescott, WI 54021
- 715.262.4488
- [email protected]
- kascomarine.com
Frequently Asked Questions (FAQ):
-
Q: Can this kit be used with other types of propellers?
A: The Shallow Water Install Kit is specifically designed for use with dock- mounted AquatiClear units and may not be compatible with other propeller types. -
Q: How do I know if the kit is installed correctly?
A: Ensure that the disc floats just above the whirlpool when the AquatiClear unit is operating. The rope should be securely fastened just above the Simple Swivel bracket.
Shallow Water Install Kit
- Kit 243609
- The Shallow Water Install Kit eliminates noise at the surface of the water by disrupting the whirlpool that can form above the AquatiClear propeller in shallow installations. The kit is designed for use with dock-mounted AquatiClear units.
- Attach the swivel clasp to the disc.
- Slip the looped end of the rope over the top of the pipe so that it rests just above the Simple Swivel bracket.
- Drop or lower the disc to the surface of the water.
- Adjust the length of the rope until there is only a little slack and tighten the tensioner to secure the loop just above the Simple Swivel bracket.
NOTE
To avoid unwanted noise, ensure that the AquatiClear unit is installed at
least 8 inches below the water’s surface.
When the AquatiClear is operating, the disc will be pulled toward the
whirlpool to float just above it.
DOCUMENT #243610
800 Deere Rd. Pescott, WI 54021
- 715.262.4488
- [email protected]
- kascomarine.com