BELLEZE 014-HG-44805 5 Tier Wood Bookshelf Instruction Manual

June 17, 2024
BELLEZE

BELLEZE 014-HG-44805 5 Tier Wood Bookshelf

BELLEZE 014-HG-44805 5 Tier Wood Bookshelf

Instruction Manual

Product Specifications:

  • Product Name: Hazel 5 Tier Bookshelf
  • Maximum Load Capacity: 60 lb per shelf
  • Assembly Time: Estimated 30 minutes
  • Required Tools: Not included (refer to manual for details)

Estimated time for assembly:

30 mins

Weight limitations are as follows:

Product Details

Assemble

Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
For safety, please keep pets and children away from the assembly area.
Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.

This furniture requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with the various steps.
Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly. Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.

Hand tight all hardwares and careful not to over tighten to avoid damaging the product.

CAUTION

There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking hazard.
Keep all plastic bags and packaging film away from pets and children to avoid suffocation.

PACKAGE CONTENTS

CODE DESCRIPTION QTY
1 Storage Panel 5
2 Upper Leg Frame 2
3 Lower Leg Frame 2
4 Crossbar 2

PACKAGE CONTENTS

Required tools for assembly (Not included)

1. Assemble the crossbars (4) into a “X” shape.

2. Assemble the upper and lower leg frames together(2,3)

3. Assemble the crossbars (4) across the upper and lowerframes (2, 3).

4. Attach leg levelers under the leg frames.

5. Assemble a storage panel (1) on the bottom most slot of the leg frame.

6. Affix the self on a wall

Furniture must permanently fixed to the wall stud with included anti-tipping device to prevent the furniture from tipping over.

  • Mark the drill position on the wall with a pencil.
  • Drill a small hole on the marked position.
  • Insert a wall anchor into the drilled hole.
  • Fixed the anti-tipping strap to the wall with provided screws.

7. Level the shelf on the ground, adjust the leg leveler if neccessary.

YOU’RE FINISHED!

Warning

Serious or fatal crushing injuries may occur if the furniture tip-over.

Furniture must permanently affixed to the wall with included anti-tipping device in order to prevent the furniture from tipping over.

stability and load bearing capacity of the furniture. If you are uncertain about which type of device to use, please contact us or your local hardware store.

Warning

Only place items on top of the product if they meet the recommended size and weight limits.
Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
Items placed onto this product must be resting on a support surface without hanging over the edges.

BELLE Z E®

FURNITURE CARE AND MAINTENANCE
Medium – Density Fiberboard

Thank you for your purchase. We want your item to last as long as possible.
To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

MAINTENANCE

  • Tighten all bolts and screws again within the first 2 weeks of assembly.
  • Check the tightness of all bolts every 2 months and tighten them if necessary.

CLEANING

  • Clean the surface of the MDF (medium – density fiberboard) with a lightly dampened cloth.
  • A small amount of mild soap can be used if necessary.
  • Dry the surface immediately after cleaning.
  • DO NOT use bleach or alcohol to clean the surface.
  • DO NOT apply wood treatment on parts made with MDF.
  • MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

The manufacturer and seller are not responsible for any and all liability relating to personal injury, property damage or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification or neglect of this product.

© All copyright of this document belongs to BELLEZE.
This document may not be printed, translated, reproduced, or distributed in whole or in part without written permission from BELLEZE

WARRANTY

BELLEZE products come with a 1-year warranty from the date of delivery.
Register your product on our website to enjoy our limited lifetime warranty

AFTER-SALE SERVICE

| Encounter any difficulties or missing parts?
---|---
| Contact us at 1-800-682-6376 or email us at support@belleze.com
| We will send you replacement.
| Hassle free!
No need to worry about repackaging and sending your item back

We hope you enjoy your new BELLEZE furniture!
Share your photos on Instagram and tag us: @bellezefurniture.

CONTACT INFO:

support@belleze.com

1-800-682-6376

Frequently Asked Questions (FAQ):

Q: Can I use bleach or alcohol to clean the surface of the bookshelf?

A: No, DO NOT use bleach or alcohol as it may damage the surface. Refer to the care and maintenance guide for cleaning instructions.

Q: What should I do if I am missing hardware or components during

assembly?

A: Do not use the product until you have obtained the missing parts. Contact customer support for assistance in acquiring the necessary components.

Q: How many people are required for assembling the bookshelf?

A: This furniture requires 2 people for assembly to ensure proper and safe construction.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals