ROBENS 690165 Lighthouse Lantern Instruction Manual
- June 17, 2024
- ROBENS
Table of Contents
ROBENS 690165 Lighthouse Lantern
INSTRUCTIONS FOR USE
- Hanger.
- Removable lamp shade.
- Battery compartment lid.
- Hook.
- Button and power indicator.
LIGHT MODES
- Press the button for warm light (700 Lm).
- Press the button twice for cool light (300 Lm).
- Press the button three times for warm and cool together (1000 Lm).
- Press the button four times for flashing mode.
- In the first three modes, press and hold the button to dim the light.
USE OF THE LAMP
- Open battery compartment by rotating the lid counter clockwise.
- Insert 3 x 1.5V D batteries (not included), observe polarity.
- Power indicator will light green when lamp is on, when power is low it will light red.
- Power indicator will flash green when off, to allow easy finding of lamp in the dark.
- Please use batteries of high quality and take out the batteries if you do not use the light for a long time, or the light can be damaged by electrolyte leakage or battery explosion which is caused by low quality battery.
- Please clean the contacts of your light from time to time, especially if the light flickers or doesn’t light up.
- Lamp can be used hanging from the hanger, standing, or hanging from the hook.
- To remove the lampshade, rotate it counter clockwise from the body of the lamp.
- Lamp can be cleaned with water and a damp rag.
- Lamp is water resistant to IP44.
- Do not use corrosive liquids to clean the lamp.
- Do not stare into the light source.
- Do not modify the product.
LIGHT SOURCE: 12W LED
TECHNICAL DATA
4.5V (3×1.5V D not included) , 12W
Class 3 appliance
DISPOSE OF PRODUCT ACCORDING TO LOCAL REGULATIONS.
Customer Support
Robens® is a reg. trademark of Oase Outdoors
EU: Kornvej 9, DK-7323 Give, Denmark, UK: One Glass Wharf, Bristol, BS2 0ZX
© 11/2023 Oase Outdoors. Made in China
Read User Manual Online (PDF format)
Loading......