VEVOR FC1359-SYT Wood Carts User Manual
- June 17, 2024
- VEVOR
Table of Contents
**VEVOR FC1359-SYT Wood Carts User Manual
**
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.
WARNING:
Please read this manual carefully before using the product.
Failure to do so may result in serious injury.
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the wood Cart.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the wood cart.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use only on flat, level, and hard surfaces.
SAVE THESE INSTRUCTIONS
Part List:
Handle(Front Support): 2pcs
Leg Support: 2pcs
Wheel: 2pcs
Axle: 1pcs
Net: 1pcs
Hardware List:
Bolt: 4pcs
Washer: 4pcs
Spring Washer: 4pcs
Nut: 4pcs
Big Washer: 4pcs
Cotter Pin: 4pcs
Step 1:
Attach the handle to the leg supports, fixed with 2 bolts, washers, spring
washers and nuts.
Step 2:
Attach the net onto the frame in advance.
Step 3:
Attach the front support to the leg supports, fixed with 2 bolts, washers,
spring washers and nuts.
Step 4:
Insert the axle into the leg support with 2 large washers, Push the frame to
expose the 2 holes on the axle, fixed by 2 cotter pins.
Step 5:
Attach the wheel to the axle with a large washer and cotter pin.
Wood Carts
We continue to be committed to provide you tools with competitive price. “Save
Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.
Technical Support and E-Warranty Certificatewww.vevor.com/support
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>