LG 43UQ7070ZUD LED TV Owner’s Manual

: June 16, 2024
: LG

LG 43UQ7070ZUD LED TV

Product Information

Specifications

Model: 50QNED80AQA, 65QNED80AQA, 75QNED80AQA, 86QNED80AQA, 50QNED80UQA, 65QNED80UQA, 75QNED80UQA, 86QNED80UQA, 55QNED80AQA, 65QNED85AQA, 75QNED85AQA, 86QNED85AQA, 55QNED80UQA, 65QNED85UQA, 75QNED85UQA, 86QNED85UQA, 55QNED85AQA, 65QNED90UQA, 75QNED90UQA, 86QNED90UQA, 55QNED85UQA, 65QNED99UQA, 75QNED99UQA, 86QNED99UQA, 43NANO75UQA, 55NANO75UQA, 65NANO80AQA, 75NANO80AQA, 50NANO75UQA, 55NANO80AQA, 70NANO75UQA, 86NANO75UQA, 50NANO80AQA, 65NANO75UQA, and 75NANO75UQA
Screen type: LCD with LED backlights

Product Usage Instructions

Safety Instructions

To ensure safe usage of your LED TV, please follow these instructions:

If the power plug is damaged, liquid has been spilled on the TV, objects have fallen into the TV, or if the TV has been exposed to rain or moisture, do not operate it and contact qualified service personnel.
If the TV does not operate normally or has been dropped, do not attempt to open it. There are no user-serviceable parts inside. Refer to qualified service personnel for assistance.
Do not expose the TV to rain or moisture to reduce the risk of fire and electric shock.
Ensure proper grounding of the antenna system for protection against voltage surges and static charges. Refer to Section 810 of the National Electrical Code (NEC) for guidance on proper grounding.

Optional Extras

There are optional extras available for your LED TV. Refer to the USER GUIDE or visit the [Support] section on our website to learn more about these extras.

Important Safety Instruction

It is important to read and understand all safety instructions before operating your LED TV:

CAUTION RISK OF ELECTRIC SHOCK: Do not open the TV. There are no user-serviceable parts inside. Refer to qualified service personnel for any servicing needs.
To reduce the risk of fire and electric shock, do not expose the TV to rain or moisture.
Avoid placing the TV in a confined space such as a bookcase. Install it on a stable surface, away from carpets or cushions.
Do not block or cover the TV with cloth or other materials while it is in use.

FAQ

Where can I find the model and serial number of my LED TV?
The model and serial number are located on the back and one side of the TV. Please record them for future reference.

How can I contact the LG Customer Information Center?
You can visit our website at www.lg.com or call the following numbers:

USA: 1-800-243-0000
USA (Commercial User): 1-888-865-3026
USA (Consumer User): 1-888-542-2623
Canada: Visit www.lg.com for contact information

Where can I find the Supplier’s Declaration of Conformity?
The Supplier’s Declaration of Conformity can be found in the user manual or on our website at www.lg.com.

How can I register my product online?
You can register your product online by visitingwww.lg.com and following the registration instructions.

LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.

50QNED80AQA
50QNED80UQA
55QNED80AQA
55QNED80UQA
55QNED85AQA
55QNED85UQA
65QNED80AQA
65QNED80UQA
65QNED85AQA
65QNED85UQA
65QNED90UQA
65QNED99UQA
75QNED80AQA
75QNED80UQA
75QNED85AQA
75QNED85UQA
75QNED90UQA
75QNED99UQA
86QNED80AQA
86QNED80UQA
86QNED85AQA
86QNED85UQA
86QNED90UQA
86QNED99UQA
43NANO75UQA
50NANO75UQA
50NANO80AQA
55NANO75UQA
55NANO80AQA
65NANO75UQA
65NANO80AQA
70NANO75UQA
75NANO75UQA
75NANO80AQA
86NANO75UQA
32LQ630BPUA 32LQ630BAUA
43UQ7070ZUD
43UQ7070ZUM
43UQ7590PUB
43UQ7590PUK
43UQ8000AUB
43UQ8000AUK
43UQ9000PUD
50UQ7070ZUE
50UQ7070ZUN
50UQ7570PUA
50UQ7570PUJ
50UQ7590PUB
50UQ7590PUK
50UQ8000AUB
50UQ8000AUK
50UQ9000PUD
55UQ7070ZUE
55UQ7070ZUN
55UQ7570PUA
55UQ7570PUJ
55UQ7590PUB
55UQ7590PUK
55UQ8000AUB
55UQ8000AUK
55UQ9000PUD
65UQ7070ZUE
65UQ7070ZUN
65UQ7570PUA
65UQ7570PUJ
65UQ7590PUB
65UQ7590PUK
65UQ8000AUB
65UQ8000AUK
65UQ9000PUD
70UQ7070ZUD
70UQ7070ZUM
70UQ7590PUB
70UQ7590PUK
70UQ8000AUB
70UQ8000AUK
70UQ9000PUD
75UQ7070ZUD
75UQ7070ZUM
75UQ7590PUB
75UQ7590PUK
75UQ8000AUB
75UQ8000AUK
75UQ9000PUD
86UQ7070ZUD
86UQ7590PUD
86UQ8000AUB
86UQ9000PUD

The model and serial number of the product are located on the back and on one side of the product.Record them below in case you ever need service

Model
Serial No

Supplier`s Declaration of Conformity

Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
E-mail lg.environmental@lge.com

LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer
User
1-888-865-3026 USA, Commercial
User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
Copyright © 2022 LG Electronics Inc.
All Rights Reserved

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

Important Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install by the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).

Before reading this manual

Read this manual thoroughly before operating your TV, and keep it for future reference.
On the website, you can download the manual including installation, using, troubleshooting, specifications, license etc, and view its contents on your PC or mobile device.
User Guide: For more information about this TV, read the USER GUIDE embedded in the product. (Depending upon model) — To open the USER GUIDE → → [Support] → [User Guide]

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices work only with certain models.
The model name or design may be changed due to the manufacturer’s circumstances or policies.
Magic Remote Control: Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.
A cable to connect antennas and external devices must be purchased separately.

Note

Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
The items supplied with your product may vary depending upon the model.
The image shown may differ from your TV.

Safety instructions

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Do not place the TV and/or remote control in the following environments:
- Keep the product away from direct sunlight.
- An area with high humidity such as a bathroom.
- Near any heat source such as stoves and other devices that produce heat.
- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.
- An area exposed to rain or wind.
- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
- Do not install in excessively dusty places.
- Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.
Ventilation
- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
- Do not install the product on a carpet or cushion.
- Do not block or cover the product with cloth or other materials while unit is plugged in.
Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
Do not move the TV whilst the Power cord is plugged in.
Do not use a damaged or loosely fitting power cord.
Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.
Disconnecting the Device from the Main Power
— The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
Outdoor Antenna Grounding (Can differ by country):
— If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead- in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/ NFPA 70
Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.
Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.
Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
If any of the following occur, unplug the product immediately and contact your local customer service.
- The product has been damaged.
- If water or another substance enters the product (like an AC adapter, power cord, or TV).
- If you smell smoke or other odors coming from the TV
- When lightning storms or when unused for long periods of time. Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.
Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.
Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Moving

When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.
Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.

Cleaning

When cleaning, unplug the power cord and wipe gently with a soft/ dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/ or its panel. Otherwise, this may result in electric shock or product damage.

Installation

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

It is recommended to move the TV in the box or packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and all cables.
When holding the TV, the screen should face away from you to avoid damage.
Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.
Use at least two people to move a large TV.
When transporting the TV, do not expose the TV to jolts or excessive vibration.
When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
When handling the TV, be careful not to damage the protruding buttons.
Avoid touching the screen at all times, as this may result in damage to the screen.
Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

Lift and tilt the TV into its upright position on a table.
Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.
Connect the power cord to a wall outlet.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
Do not use any unapproved items to ensure the safety and lifespan of the product.
Any damages or injuries by using unapproved items are not covered by the warranty.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.
If there are bolts inserted at the eye-bolts position, remove the bolts first.
Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.
Use a platform or cabinet that is strong and large enough to support the TV securely.
Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
For more information of screws and wall mount bracket, refer to the Separate Purchase.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model).

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cableis optional.

Make sure not to bend the copper wire of the RF cable.
Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
Use a signal splitter to use 2 TVs or more.
DTV Audio Supported Codec: MPEG, Dolby Digital
This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed (Depending upon country).

Starting TV

Turning on the TV
You can simply operate the TV functions, using the button.

Power On (Press)
Power Off1) (Press and Hold)
Menu Control (Press2))
Menu Selection (Press and Hold3))

All running apps will close.
You can access and adjust the menu by pressing the button when TV is on.
You can use the function when you access menu control.

Note

When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual (Depending upon model).
The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off thedevice and unplugging the power cord (Depending upon model).

Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.

HDMI

When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
Supported HDMI Audio format (Depending upon model): True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

Note

If the device connected to Input Port also supports HDMI Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Color] setting to off (Depending upon model).
→ → [General] → [Devices] → [HDMI Settings] → [HDMI Deep Color] (Depending upon model).
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
Recommended HDMI cable types (3 m (9.84 feet) or less) — Ultra High Speed HDMI®/™ cable

USB

Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. (Depending upon model)

Note

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick, 18 mm (0.7 inches) width and 8 mm (0.31 inches) a wire diameter. (Depending upon model)
Use an extension cable that supports if the USB cable or USB flash drive does not fit into your TV’s USB port.

IR Blaster
Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster (Depending upon country) (Depending upon model).

Note

Connect the IR Blaster cable to the TV’s IR Blaster port.
Use universal control settings to control the device.
Secure the IR Blaster with the 3M tape provided.

External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

Note

The external device connections shown may differ slightly from illustrations in a manual.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
When connecting to a wired LAN, use a CAT 7 cable with high-speed Internet transmission.
The TV may be capable of operating without a set-top-box from a multichannel video programming distributor (MVPD).

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending upon model).

Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.
Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
For information of the power supply and power consumption, refer to the label attached to the product. — The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
On some models, the label is inside the external device connection terminal cover.
Depending upon the model or country, the typical power consumption may not be on label.

Depending upon country

(Only QNED80AQA, QNED85AQA)
Broadcasting Specifications

Television system| ATSC, ATSC3.0 (Only USA), NTSC-M, 64 & 256 QAM VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

75 Ω

Channel coverage (Band)
External antenna impedance

(Except for QNED80AQA, QNED85AQA)
Broadcasting Specifications

Television system| ATSC, NTSC-M, 64 & 256 QAM

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

75 Ω

Channel coverage (Band)
External antenna impedance

Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced 8K images will vary depending upon the source content (Depending upon model).

Environment Condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %

Product Information

(Only QNED99*)

Wireless module(LGSBWAX12)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac/ax)

Frequency range Output Power (Max.)
2,400 to 2,472 MHz 17 dBm
5,150 to 5,725 MHz 15 dBm
5,725 to 5,850 MHz 15 dBm
5,945 to 7,125 MHz 11 dBm

Bluetooth

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 9 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device andthe body.
FCC ID: BEJLGSBWAX12 / IC: 2703H-LGSBWAX12

(Only QNED80, QNED85, QNED90, 86NANO75, 86UQ70, 86UQ75, 86UQ80, 86UQ90)

Wireless module(LGSBWAC95)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 18.5 dBm
5,150 to 5,725 MHz 18 dBm
5,725 to 5,850 MHz 18 dBm

Bluetooth

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 9 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC95 / IC: 2703H-LGSBWAC95

*(Only 32LQ63)**
Wireless module(LGSBWAC03)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 20 dBm
5,150 to 5,725 MHz 18.5 dBm
5,725 to 5,850 MHz 18 dBm

Bluetooth

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 9 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC03 / IC: 2703H-LGSBWAC03
(Except for QNED80, QNED85, QNED90, QNED99, 86NANO75, 86UQ70, 86UQ75, 86UQ80, 86UQ90, 32LQ63)

Wireless module(LGSBWAC22)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)
2,400 to 2,483.5 MHz 17 dBm
5,150 to 5,725 MHz 16 dBm
5,725 to 5,850 MHz 16 dBm

Bluetooth

Frequency range Output Power (Max.) 2,400 to 2,483.5 MHz 8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
FCC ID: BEJLGSBWAC22 / IC: 2703H-LGSBWAC22

Open Source Software Notice Information

To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that must disclose source code, and to access all referred license terms, copyright notices, and other relevant documents please visit https://opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for three years after our last shipment of this product.

Troubleshooting

WARNING

When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel, (Depending upon model).
Make sure to wring any excess water or cleaner from the cloth.
Do not spray water or cleaner directly onto the TV screen.
Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Regulatory

FCC NOTICE
(For USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications in the construction of this device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product.

FCC Radio Frequency Interference Requirements (for UNII devices)
(For USA)
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

FCC RF Radiation Exposure Statement
(For USA)
(For having wireless function (Wl.AN, Bluetooth, … ))
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.

Industry Canada Statement
(For Canada)
(For having wireless function (WLAN, Bluetooth, … ))
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
(For Canada)
(For having wireless function (Wl.AN, Bluetooth, … ))
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna &your body.
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO ORTV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

RSS-247 Requirement
(For Canada)
(For product having the wireless function using 5 GHz frequency bands)
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such thatthe equipment still complies with the e.i.r.p. limit; For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such thatthe equipment still complies with the e.i.r.p. limits as appropriate; and (For devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW) Antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 ofRSS-247 shall be clearly indicated.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and thatthese radars could cause interference and/or damage to LE-LAN devices.

NOTE TO CABLE/TV INSTALLER
(For USA and Canada)
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical

WARNING! (STABILITY HAZARD)
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
ALWAYS use furniture that can safely support the television set.
ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
NEVER place a television set in an unstable location.
NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

Symbols

LG Take-back & Recycling Policy
(For USA) LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place and also provides product take-back& recycling service voluntarily in some regions. LG Electronics evaluates products’recyclability at the design step selectively, to improve recyclability where practicable. Through these activities, LG Electronics seeks to contribute to conserving natural resources and protecting the environment. For more information, please visit our global site at https://www.lg.com/recycling

THE CONSUMER TECHNOLOGY INDUSTRY CARES
Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury

TUNE IN TO SAFETY

NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
ALWAYS read and follow all instructions for proper use of your television.
ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.
ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by a Nationally Recognized Testing Laboratory (NRTL).
ALWAYS follow all instructions supplied by the television and mount manufacturers.
ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Use proper anchoring systems for different wall or ceiling types (e.g. wood, concrete, metal, etc.). If you are unsure, contact a professional installer.
Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

REMEMBER Special care should be made in the placement of older CRT/flat-panel televisions. Many new television buyers move their older CRT/flat-panel televisions into a secondary roomafter the purchase of a flat-panel television.
NEVER place your older CRT/flat-panel television on a dresser where children may be temptedto use the drawers to climb.
ALWAYS place your older CRT/flat-panel television on furniture that is sturdy and appropriate for its size and weight.
ALWAYS make sure your older CRT/flat-panel television does not hang over the edge of your furniture.

CTA.tech