ORBITREK MN Manual Fitness & Workout Home Gym Equipment Instruction Manual

June 5, 2024
ORBITREK MN

Z

ORBITREK MN Manual Fitness & Workout Home Gym Equipment

IMPORTANT WARNINGS

  • Do not stand on the unit, always remain seated while using the unit.
  • This product has been tested in accordance with the requirements of EN ISO 20957-1, class HC – home use only.
  • The machine is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision instruction concerning use of the machine by a person responsible for their safety.
  • This is not a toy. Please keep away from children and pets at all times. This unit can be used by adult only.
  • Please use extreme caution when the unit is being used around children, disabled or invalid persons. Do not leave the unit unsupervised.
  • The machine is intended for household use only. Do not use outdoors.
  •  Please check the unit and its parts thoroughly for any damages. Do not use the unit if any parts are damaged or if the unit malfunctions.
  • Please do not try to make any self-repairs. Please contact a qualified service agent for repairs. Any servicing should be performed by an authorized service representative.
  • Do not use foreign attachments on this unit. Use the attachments provided by the manufacturer only.
  • Keep fingers away from the foot plate while machine is in use.
  • Please use the unit as described in the manual. Any misuse or mishandling may cause malfunctioning.
  • Use the unit on a levelled surface. Keep at least 2 meters of free space all around, away from water and moisture.
  • Always wear appropriate workout clothing when using the unit. Running or aerobic shoes are also required.
  •  Always operate the unit in upright position.
  •  The unit is not intended for medical use.
  •  This unit should not be used by an indi vidual suffering from any physical ailment that may limit the user’s capacity to operate controls.
  •  If you feel uncomfortable or experience any adverse symptoms while using the unit, stop use immediately.
  •  Please allow the unit to be used by one person at a time only.
  • Do not use the unit for more than 30 minutes at a time. Extensive use may damage the unit.

ONLY USE THE UNIT WHILE SITTING. DO NOT STAND ON THE UNIT
PLEASE CONSULT YOUR DOCTOR PRIOR TO USAGE IF YOU ARE:

  • PREGNANT
  • HAVE A PACEMAKER
  • DIABETIC
  • OR HAVE ANY CONCERNS REGARDING HEALTH

PRODUCT FEATURES

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG2

IDENTIFY YOUR HARDWARE AND TOOLS

ORBITREK-MN-Manual-Fitness-&amp-
Workout-Home-Gym-Equipment-FIG3

ASSEMBLY INSTRUCTIONS

STEP 1ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG9 Attach Foot Stand to the rear of Main Body. Be sure the holes line up.

STEP 2

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG10 Take 2 pcs of screws (10*42mm) and pass them through the bottom of Foot Stand. Add nuts on the top, tighten the nuts using wrench provided.

STEP 3

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG11
Turn the unit upside down, locate 2 pcs of screws (8*16mm) with black washers and attach Base Plate to the front bottom of Main Body. Insert screws and black washers through the holes. Tighten the screws and nuts using allen key (5mm) provided.

STEP 4

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG12
Affix left pedal to the left wheel and insert 2 pcs screws (8*45mm) through the holes. Add nuts on the back. Tighten the screws by holding the screw in place using allen key. Tighten nuts by the wrench provided.

STEP 5
Repat the same procedure for right pedal

STEP 6

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG13 Assembly is now complete

OPERATING INSTRUCTIONS

MAKE SURE YOUR FEET ARE PLACED IN THE RIGHT POSITION, AS BELOW:

ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG14

  • For comfortable pedaling while sitting, please be sure to sit in a way that your knees are angled at more than 90 degrees.
  • The unit can be used to pedal both backwards and forwards.
  • Use the Adjusting Knob to adjust the tension and workout intensity. Turn right toward symbol + to increase the intensity, turn left toward symbol – to decrease the intensity.
  • Once you stop exercising, the monitor will turn off after 4 seconds.

ELECTRONIC MONITOR FUNCTIONS

  1. SCAN
    Press the Mode Key till the SCAN icon is flashing which means SCAN function is on.
    The display will automatically show all the features.

  2. TIME
    Press the Mode Key until TIME icon is on. When you start pedaling, the monitor will display the length of time since beginning the session.

  3. COUNT
    Press the Mode Key until COUNT icon is on. As the exercise starts, the display will show cumulative number of strides.

  4. DISTANCE
    Press the Mode Key until DIST icon is on. Once the movement starts, the monitor will display the cumulative distance in meters.

  5. CAL
    Press the Mode Key until CAL icon is on. When the exercise starts, this device only estimates the number of calories burned and does not reflect the actual calories burned. Results will vary.

NOTE:

  • If you cannot see the display data, open the monitor cover and replace the battery (1.5V LR44)
  • The Monitor will turn off after 4~5 minutes if no data transferred.
  •  When you start exercise, please press the Mode Key. The monitor will turn automatic.
  •  When you stop exercise, all function will stop and the monitor will stop in 4 seconds.

HOW TO REPLACE BATTERY

  1. Open the Electronic Monitor Cover.

  2.  Use a small flat screwdriver (not provided) or the edge of the wrench to open (bend) the small locking clip on one side of the battery cover Remove battery.
    ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG6

  3.  Replace with a new battery (1.5V LR44). Bend down the small locking clip to secure the battery in place
    ORBITREK-MN-Manual-Fitness-&amp-Workout-Home-Gym-Equipment-
FIG7

  4.  Close Electronic Monitor Cover by aligning the guides on the unit with the inside of the gap on the Monitor Cover bottom.

CARE AND MAINTENANCE

  • Store the unit in a dry, cool and ventilated area.
  •  Do not store the unit in direct sun light.
  • Do not store in humid areas such as bathrooms.
  • Use a soft damp cloth to clean the surface of the unit. Mild detergent may be used to clean.

TROUBLESHOOTING

Please refer to below problems and solutions

Problem Solution
Squeaky sound Apply small amount of lubricant oil on the wheel
Monitor does not light up Replace battery (LR44 1.5V)

Battery Disposal:

Batteries should not be considered as regular garbage. As consumer you are obliged to return finished batteries. The finished batteries can be returned to a collection base at your residential area or at places where batteries can be bought.

Thane Canada Inc.
Mississauga ON L4W 5M6, Canada
www.thane.ca
Thane USA, Inc.
PO BOX 35526, CANTON, OH 44735 U.S.A.
www.thane.com
Thane Direct UK Limited
Thanet House 231-232 Strand,
London WC2R 1DA
www.thane.tv
Danoz Direct Pty Ltd.
Bondi Junction, NSW, 2022, Australia
www.danoz.com.au
OPERADORA AINOA SAPI DE CV
Av. Magnocentro No. 5 Piso 1 Centro Urbano Interlomas, Municipio Huixquilucan de Degollado, Estado de México. C.P: 52760
www.mejorcompratv.com
TVNS Scandinavia AB
SE-211 74 Malmö, Sweden
www.tvins.com

© 2021 Thane IP Limited.
“Thane”, “Orbitrek™ MN” and related logos and variations are trademarks or registered trademarks, in Canada and/or other countries, of Thane IP Limited and/or its affiliated companies.
MADE IN CHINA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals