DAWNYIELD 3 Tier Golden Bar Cart Instruction Manual

DAWNYIELD 3 Tier Golden Bar Cart

Specifications

• Product: 3-Tier Bar Cart
• Components: A to W as listed in the manual
• Assembly Tools: Allen wrench, screws of various sizes
• Dimensions: Varies based on assembly
• Material: Iron, Wood
• Color: Black

Product Usage Instructions

Assembly Steps:

1. Mount the four casters (N) on the bottom.
2. Connect side racks (A & B) with long iron pipes (C) using M6x30mm screws (Q).
3. Install board (I-2) at the bottom using M6x20mm screws (P).
4. Install long pipes without holes (C) between side racks and one long pipe with raised section (D).
5. Install the middle vertical rack (K) with M6x30mm screws (Q).
6. Install Small Board (J) with ST7x40mm screws (R) and short iron pipes with no holes (F) on top.
7. Secure the W-shaped rack (L) between the middle vertical rack and side rack with M6x12mm screws (O).
8. Fix cup racks (U) on the top board (I-1) with self-tapping screws (V).
9. Install long iron pipes with one hole (G) and top board (I-1).
10. Install cart handle rail (M) and long iron pipes without holes (C).

Note: Please refer to the manual for detailed instructions and illustrations.

Frequently Asked Questions (FAQ)

• Q: What are the dimensions of the assembled bar cart?
  A: The dimensions may vary based on assembly, please refer to the manual for specifics.

• Q: Can the bar cart be disassembled for storage?
  A: Yes, you can disassemble the bar cart following the reverse of the assembly steps.

• Q: How should I clean the bar cart?
  A: Use a damp cloth to wipe down the surfaces. Avoid harsh chemicals that may damage the material.

3-Tier Bar Cart Installation Steps

Important Assembly Advice

1. In order to avoid the situation that some parts cannot be installed, please make sure to follow the correct installation order.
2. Parts of assembly will be MUCH EASIER with 2 people.
3. Please keep a mild tightness on all the screwing during assembly. After the whole bar cart is assembled, firmly tighten all the screws.

Components

Assembly Instructions

Step 4

1. Install two long pipes wither with M6x30mm screws (Q) in
2. Install one long pipe with ram M6x30mm screws (Q). Insert t the raised section on pipe (Da

Step 10

1. Install cart handrail (M) with M6x20mm screws (P).
2. Install two long iron pipes without hole (C) by M6x30mm screws (Q).

AFTER-SALES CONTACT: (1)646 820 2494
Monday to Saturday: 9:00am to 18:00pm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>