ICY DOCK DOCKMB873MP-B 8 x M.2 NVMe SSD Backplane Cage for 5.25 Inch Bay User Manual
- June 17, 2024
- ICY DOCk
Table of Contents
ICY DOCK DOCKMB873MP-B 8 x M.2 NVMe SSD Backplane Cage for 5.25 Inch Bay
Package Contents
-
Device
-
4 x M3*6 Screws for Device (2 x Screws for Spare Parts)
-
User Manual
-
Thermal Pad × 16
-
Drive ID Plugs
-
2 x SATA Power Extension Cable
Note: Please use the included screws to secure the device
Note: Please use the extension cables before connecting to your cable
Device Information
▼ Front View
- Drive Tray Ejection Button
- LED Indicator (Power: Solid Green; Drive Access: Flashing Green)
- Slot for Drive ID Plug
▼ Side View
Note: When installing the Tough Armor MB873MP-B, only the lower screw holes have to be secured. This device can be installed upside down if desired.
▼ Rear View
▼ Drive Tray Inner View
Installation Guide
Push the tray ejection button to eject the drive tray.
Warning
If using the 1mm thermal pad on the M.2 drive and it prevents M.2 drive from
mating with the enclosure’s connector correctly, please use the 0.7mm thermal
pad instead.
(Optional)
If there is a significant height difference between the components on the M.2 drive, use an unused thermal pad, cut it into small pieces and paste it onto the shorter component for a complete contact with the thermal pad.
Secure the drive with adjustable M.2 SSD locker.
Device Installation
*Cables are not included
Note: If the drive is not detected by the system, go to “device manager”, right click on “disk drives” and then select “scan for hardware changes” to preform manual hardware refresh
For the warranty information, please visit www.icydock.com/warranty.php
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>