FRIGIDAIRE A00540901-B Stainless Steel Freestanding Induction Range Instruction Manual
- June 17, 2024
- Frigidaire
Table of Contents
FRIGIDAIRE A00540901-B Stainless Steel Freestanding Induction Range
Door Handle Mounting Instructions
- Remove handles from carton and any other protective packaging.
- Position handle end caps over left and right preinstalled shoulder bolts (A) that are fastened to the door, ensuring the holes for the set screws are facing down.
- While holding handle firmly against door, loosely tighten right Allen set screw (B) with supplied Allen wrench until there is no gap between handle and door.
- Still holding the handle firmly to the door, firmly tighten left Allen set screw (B) with supplied Allen wrench.
- Return to the right Allen set screw (B) and firmly tighten with supplied Allen wrench.
NOTE
All set screws should be tightened so the screw is below the surface of the handle. The handle should be drawn tight to the door with no gaps.
The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on the handles.
Mounting handle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>