Gimify P1 Pet Grooming Vacuum Cleaner User Guide
- June 17, 2024
- Gimify
Table of Contents
USER GUIDE
Pet grooming vacuum cleaner
Safety Instructions
Do not operate or unplug the power cord with wet hands to avoid malfunction
and electric shock.
Do not use in places with flammable or combustible liquids to prevent fire and
explosion.
There may be an odor when first used, but it will not cause any adverse effect
on the human body. Please note that the odor will disappear after a short
period of use. However, if the burning odor persists, stop using the product
immediately.
Please keep the dust cup and filter clean for a long time. Using the dust cup
and filter in a dirty condition may cause a malfunction and may result in an
accident.
Remove the plug from the socket before cleaning or maintenance. There is a
risk of electric shock, accident, or injury if the power is turned on.
This product has an overheating protection function. If the motor heats up
abnormally, stop operation immediately.
If the suction port is blocked, stop operation immediately, remove the dust
cup, make sure the suction port and filter are clean, and open it again after
30 minutes.
Be sure to install and use the filters. Removing the filters for use may cause
malfunction.
The blades of the accessory set (thinning comb, electric clippers) have been
sharpened due to their functionality. Be careful with the sharp edges of the
blades and use them safely.
Note: The current-carrying tube contains electrical connections.
Therefore, it cannot be used to absorb water, nor can it be immersed in water
for cleaning. Check the hose regularly and do not use it if it is damaged.
Packing Accessories
Host Preparation:
Note: If you find something missing from the package, please contact us as soon as possible.
Instructions for Use
Host Preparation:
Remove the dust cup: Toggle the “Dust Cup Release Button” backwards to
lift out the “Dust Cup”.
Install the dust cup: Place the dust cup in the corresponding position on
the fuselage, press firmly around the “Dust cup Release Button” and hear a
“click” sound which indicates that the dust cup is installed in the fuselage.
Note: If you find something missing from the package, please contact us as soon as possible.
Operation Guide:
a. Switch on/off
- Short press the “Power Button” to turn on the default standard inhalation mode of the host.
- Short press the “Power Button” to turn off the host.
b. Inhalation mode operation:
- The Use with trimmer, 2in1 brush, blade comb, thinning comb and other accessories.
- Short press the “Power Button” to activate the default standard inhalation mode of the main unit.
- Short press “Mode Button” to switch to Power Inhalation Mode.
- Press “Power button” briefly to turn off the main unit.
c．Blowing mode
- With the “Blowing Comb” accessory, the blowing mode has a heating function and the temperature can be adjusted with the “Heating Adjustment Knob” after activating the “Blowing Mode”.
- Short press the “Power Button” to activate the default standard inhalation mode.
- Long press “Mode button” to switch to “Blowing mode” default standard.
- Then short press “Mode Button” to switch to “Powerful Blow Mode”.
- Press and hold “Mode Button” again to switch to “Inhalation Mode” which is the default standard inhalation mode. The two modes are switched.
- Short press “Power Button” to turn off the main unit.
Accessory use:
Blade comb：
It can be used to clean up the excess hair during the pet’s moulting season to
achieve the effect of grooming.
Note: Pay attention to the edge of the blade and the sharpness of the
position, do not use excessive force to cause skin scratches.
Thinning comb
It can clean up the floating hair, old hair, and the garbage inside the pet’s
coat. It also has a detangling effect, making your pet’s coat more fluffy.
Plastic tips on top of the comb teeth massage your pet’s skin during the
combing process.
Blowing comb:
It can blow and dry the pet’s wet hair, can replace the home hair dryer, a
machine for two purposes.
Note: The blow dryer has a heating function, be careful not to use the
blow drying comb close to the pet’s skin, so as not to scald the pet’s skin
due to the high temperature.
Trimmer:
It can push and cut the hair on the pet and inhale it into the dust cup of the
main machine, no hair residue and no flying when pushing and cutting the hair.
Hair positioning combs:
The trimmer can be used with the hair positioning comb, and you can choose
different lengths of hair positioning combs according to different hair
styling needs.
Note: Please be careful with the soft parts of your pet’s skin, do not
use excessive force to cause skin scratches, and please keep the comb in a
safe place.
2in1 brush:
The brush has 2 adjustable positions. The front part of the brush is used to
clean up floating hairs on the pet’s body, as well as hair that has fallen to
the floor. The front part of the brush can be used to clean hair and debris
from narrow places.
The brush can also be used to clean hair from people’s clothes and to sweep
dust from small crevices.
Daily maintenance:
-
Dust cup cleaning
Removing the dust cup: Toggle the “Dust cup Release Button” backward to lift the dust cup.
To open the dust cup: Press the
“Dust Cup Lid Release Button”－－＞Open the dust cup lid－－＞Remove the filter
assembly by turning it counterclockwise－－＞Empty the dust cup
-
Clean the filter assembly:
(1) Remove the filter sponge and rotate the filter assembly down counterclockwise;
(2) Wash it with tap water and drain it after washing;
(3) Place it in a well-ventilated area to dry for at least 24 hours before assembling;
(4) Install the sponge after drying, making sure it is in place.
Note:
● Wash the sponge filter assembly in cold water at least once a month.
● Please make sure to clean it when it is dirty according to the frequency of use and different conditions.
● When cleaning, the host must be unplugged to cut off the power supply, be sure to install after drying.
● Wet sponge and filter assembly will lead to the motor with water, causing electric shock or machine damage. -
HEPA cleaning:
(1) Remove the HEPA assembly directly from the main unit.
(2) Wash with tap water and drain well.
(3) Let it dry in a well-ventilated place for at least 24 hours before assembling.
(4) After drying, install HEPA on the main unit, making sure it is in the right place.
Note:
● Wash the HEPA filter assembly in cold water at least once a month.
● Please make sure to clean it when it is dirty according to the frequency of use and different conditions.
● When cleaning, the host must be unplugged and disconnected from the power supply, and must be dried before installation.
● Undried filter sponge filter assembly can lead to water ingress into the motor, causing electric shock or damage to the machine, or the risk of electric shock.
-
Trimmer cleaning：
Turn the cutter head down in the direction of the arrow, clean hair and debris on the cutter head, and add lubricant protection.
After cleaning the cutter head
should be mounted on the electric clipper in the right place -
Hose storage:
Wrap the hose around the body and fix the hose with the hose clamp. -
Power cord storage:
The power cord is wrapped around the bottom of the fuselage in a cable slot.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>