A-iPower GXS6400DC Dual Fuel Portable Generator User Guide

A-iPower GXS6400DC Dual Fuel Portable Generator

Specifications

• Model: GXS6400DC
• Power Output: [Insert power output]
• Fuel Type: Gasoline or Propane/LPG
• Weight: [Insert weight]
• Dimensions: [Insert dimensions]

Product Usage Instructions
Unpacking and Initial Check:
Remove the generator, accessories, inserts, and literature from the packaging. Ensure all items are present and undamaged. Contact customer service if any items are missing or damaged.

Installation
Install the wheel kit as per the provided instructions to enable easy mobility of the generator.

Adding Lubricant and Fuel:
Add the recommended lubricant and fuel (Gasoline or Propane/LPG) to the generator following the guidelines in the operator’s manual.

Adjusting Shock-absorbing Seat:
Prior to operation, adjust the shock-absorbing seat to maintain a 3mm gap between the seat and the motor bracket for proper clearance. Refer to the operator’s manual for detailed instructions.

Starting the Generator:

1. Move the choke lever to the RUN position.
2. Turn the starting dial switch to the ON position.
3. Plug in items to be powered using grounded extension cords.

Changing Fuels

1. If switching from gasoline to propane/LPG, ensure the propane tank is fully closed.
2. Turn the starting dial switch knob to the ON position.
3. Refer to the operator’s manual if storing the generator for more than 30 days for proper instructions.

FAQ

1. Q: Can I use the generator indoors?
   A: No, using the generator indoors can be fatal due to carbon monoxide emissions. Always operate the generator outdoors in a well-ventilated area.

2. Q: What should I do if I encounter any issues with the generator?
   A: Contact our product service department at 855-888-3598 for assistance with any problems or queries regarding the generator.

Generator Quick Start Guide

Unpack Generator: Remove generator, accessories, inserts and Literature from carton. If any item is missing or damaged, contact our product service department at 855-888-3598.
WARNING

This Quick Reference Guide is not substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and underdstand the operator’s manual before using this product. All pages references to the operator’s manual.

1. Install the wheel kit
   Slide the axle pin(B) through the wheel(C), flat washer(D) and mount point on the frame(E). Secure them with cotter pin(F),then assemble Cap(A) to Wheel(C).

2. Add Lubricant and Fuel

3. Adjust Shock-absorbing Seat / Ajuste del asiento amortiguador Before operating the generator, the shock-absorbing seat (cushion) must be adjusted for proper clearance. Loosen the lock nut and adjust the shock-absorbing seat so there is a 3mm gap between the top of the seat and the bottom of the motor bracket. Re-tighten the lock nut.

4. Removal of Shipping Support Brackets /
   Remove the bolt (E) with double open wrench (8mm-10mm) (B). Remove the bolt (F) and nut (C) with double open wrench (13mm-15mm) (A) and double open wrench (8mm-10mm) (B).

CAUTION Failure to remove the support brackets, can result in damage to your generator, possible personal injury and avoid your warranty.

WARNING Do not overload generator or electrical cords. Consult operation manual.

Select the Fuel Source (Propane/LPG)

6. Shutdown and Storage / L’Arrêt et le stockage

Questions? Call 855-888-3598 or email support@a-ipower.com
Des questions? Téléphoner au 855-888-3598 ou envoyer un courriel à support@a-ipower.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>