AJAX H2J2хххNA 2G Jeweller with 6V PSU Security Control Panel User Guide

: June 17, 2024
: ajax

Table of Contents

H2J2хххNA 2G Jeweller with 6V PSU Security Control Panel
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hub 2 (2G) Jeweller
(with 6V PSU)
Model name: H2J2хххNA

H2J2хххNA 2G Jeweller with 6V PSU Security Control Panel

Product name : Security control panel xxx — digits from 0 to 9 indicate the device modification

https://ajax.systems/support/devices/hub-2/

Quick Start Guide
Before using the device, we strongly recommend reviewing the User Manual on the website.

Function	Operation frequency	Max RF output power
GSM850	Receive: (869 ~ 894) MHz
Transmit: (824 ~ 849) MHz	33 +/- 2.5 dBm	Class 4
EGSM90	Receive: (925 ~ 960) MHz
Transmit: (880 ~ 915) MHz	33 +/- 2.5 dBm	Class 4
DCS1800	Receive: (1805 ~ 1880) MHz
Transmit: (1710 ~ 1785) MHz	30 +/- 2.5 dBm	Class 1
PCS1900	Receive: (1930 ~ 1990) MHz
Transmit: (1850 ~ 1910) MHz	30 +/- 2.5 dBm	Class 1

Hub 2 (2G) Jeweller (with 6V PSU) is a security control panel with alarm photo verification support

Frequency range	905–926.5 MHz FHSS (complies with part 15 of the FCC rules)

RF Power Density
– SRD technology:
– GSM:| 0.0005 mW/cm2 (limit 0.60 mW/cm2)
0.1 mW/cm2 (limit 1.0 mW/cm2)
Input voltage| 4.2 10 V
Max input current| 2.2 A at 4.2 V
0.8 A at 10 V ****
Backup battery| li-Ion 2 Ah (up to 16 hours of autonomous operation)
Radio signal range| up to 6,500 ft (in an open space)
Communication channels| 2 cards (GSM 850/1900 MHz GPRS), Ethernet
Operating temperature range| from 14 F to 104 F
Operating humidity| up to 75%
Dimensions| 6.42 × 6.42 × 1.42
Weight| 12.77 oz

Complete set: 1. Hub 2 (2G) Jeweller (with 6V PSU); 2. SmartBracket mounting panel; 3. Installation kit; 4. SIM card (depends on the sales region); 5. Quick Start Guide.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20 cm the radiator and your body: Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This device contains a licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

To maintain compliance with ISED’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body: use only the supplied antenna.
Warranty: Warranty for Ajax devices is valid for two years after the purchase date. If the device does not work correctly, you should first contact the support service in half of the cases, technical issues can be solved remotely.
The full text of the warranty is available on the website: www.ajax.systems/warranty.
User Agreement: www.ajax.systems/end user agreement.
Technical support: support@ajax.systems
The manufacturing date is indicated on a sticker at the bottom of the box. The importer s name, location, and contact details are indicated on the package.
Manufacturer: AS Manufacturing LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.
www.ajax.systems