BaByliss AS128E Style Smooth 1000 Hair Dryer Brushes User Manual
- June 17, 2024
- BaByliss
Table of Contents
Read the safety instructions first.
HOW TO USE
- Ensure the hair is 80% dry and combed through to remove any tangles.
- Create your parting and divide the hair into sections ready for styling.
- Secure the selected attachment onto the handle. To interchange between the attachments, refer to the ‘Changing the Attachments’ section.
- Slide the switch to the setting suitable for your hair type to turn the appliance on.
- After use, slide the switch to the ‘0’ position to switch off and unplug the appliance.
- Allow the appliance to cool before storing away.
Changing the Attachments
- Place the attachment onto the handle and line up the two indents with the buttons on the handle.
- Push the attachment onto the handle until it clicks into place.
- To remove an attachment, press and hold the two buttons and pull the attachment away from the handle.
Drying Nozzle Attachment
- Direct the airflow onto the hair and move the airstyler around the head to remove excess moisture pre-styling.
Smooth Blow-dry Brush Attachment
- Place the brush head under a section of hair, close to the roots with the bristles pointing upwards.
- Use your other hand to pull the hair section taut against the brush head.
- Gently glide the brush head through the section of hair, until you reach the ends.
- Repeat for each hair section.
Volumising Oval Brush Attachment
- Place the brush head under a section of hair, close to the roots.
- Use the brush to lift the hair at the roots to create volume.
- Slowly move the brush down along the section, towards the ends of the hair.
- Repeat for each section of hair.
Heat Settings
There are 2 heat settings plus a cool setting. Slide the switch to the first
position to select the cool setting ‘*’, the second position for the low heat
‘I’, and the third position for the high heat ‘II’.
Please note: If you have delicate, fine, bleached or coloured hair, use the
low heat setting. For thicker hair, use the high heat setting.
CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition, please follow the
steps below:
General
- Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
- Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the power point.
- Always unplug after use.
- After use make sure the appliance and attachments are cool before placing into the storage bag.
Cleaning the Filter
- Ensure the appliance is switched off, unplugged and cool.
- Using a soft brush, clean any hair and other debris from the filter.
Made in China
AS128E – B75a
BABYLISS SARL
ZI du Val de Calvigny
59141 Iwuy
France
www.babyliss.com
FAC 2023/07
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>