DB L12 Outdoor Speakers User Manual

DB L12 Outdoor Speakers

TECHNICAL PARAMETERS

USING YOUR SPEAKER

1. Power On/Off :
   • Press and hold the power button to turn the speaker on or off.
   • Short press the power button to enter the standby mode.
2. Flame Light:
   • Press the light button to turn the light on or off.
   • Short press the light button to adjust the mode of the light: Flickering/Candle/Always On
3. Play Music/Answer a Call:
   • Short press the Play /Pause button to play a track or to answer an incoming call.
   • Press the Play /Pause button again to pause a track or end a call.
   • Press and hold the Play /Pause button to reject an incoming call.
4. Button”+”:
   • Press the volume plus button once to turn the volume up.
   • Press and hold the volume plus button to go to the next track in your playlist.
5. Button”—”:
   • Press the volume minus button once to turn the volume down.
   • Press and hold the volume minus button to go to the previous track in your playlist.
6. Bluetooth:
   • Press and hold the Bluetooth button to disconnect /reconnect Bluetooth.
   • Short press the Bluetooth button to enable the multi-sync mode to wirelessly connect multiple speakers. For detailed operations, please refer to the “SYNCHRONIZING YOUR SPEAKERS section.

BLUETOOTH PAIRING

SYNCHRONIZING YOUR SPEAKERS

You can get true wireless stereo sound or play music in sync by connecting more Torch Light Bluetooth Speakers as follows:

1. Before synchronizing your speakers, please unpair(remove/forget) all previously paired “TORCH LIGHT” Bluetooth speakers on your Bluetooth device.
2. Create TORCH LIGHT primary and secondary speakers. In the multi-sync mode, the first connected Bluetooth speaker will be the primary speaker.

• step 1 Long press the , button on one of the speakers to turn it on and get it paired with your Bluetooth device (Refer to steps 1-3 in BLUETOOTH PAIRING). And label this speaker as the Primary speaker.
• step 2 Short press the button you will hear a prompt tone “multi-sync mode”.
• step 3 Turn on the other speaker(Secondary speaker), short press the ( ) button, the Secondary speaker will emit a prompt tone ” multi-sync mode”``
• step 4 Wait for a few seconds until the Secondary speaker emits a prompt tone “synced”, then the Primary speaker and Secondary speaker are synchronized.
• step 5 To connect 3 or more Torch Light Bluetooth Speakers, please first power on and then short press the Bluetooth button, repeat these steps on desired speakers one by one. Wait patiently for 5-10 seconds, all speakers will be synchronized.

Enable the Memory Mode

• Once Primary Speaker and Secondary Speakers are successfully paired and synced in Multi-Sync mode, all the speakers will memorize the multi-pairing settings.
• If you need to use these speakers the next time, first turn on the Primary Speaker, and then turn on the Secondary Speakers one by one (No need to press the Bluetooth button) and your Primary Speaker will automatically reconnect to your Bluetooth device.
• The other Secondary Speakers will automatically enter the Multi-Sync mode and sync music playback with the Primary Speaker.

If you want the speakers to keep the sync settings you don’t have to repeat the synchronization processes the next time, you can do it in this
Way Put all speakers into Standby Mode:

1. Short press the power button (0) of the primary unit, and you will hear the prompt sound “standby”. At this time, both the primary unit and the secondary units will enter the Standby Mode, then all the indicators will go off.
2. Short press the power button of the primary unit again. When you hear the prompt sound “awake”, you can re-enter the multi-sync mode and the indicators will go on.
   • Note: The speakers will consume a small amount of power in Standby Mode.

How to Reset: Press and hold th Play/Pause (!) Button for 8 seconds.
NOTE

• When multiple speakers are successfully synchronized, only the blue light on the panel of the primary speaker will flash, and the indicator lights of other speakers will remain on.
• To adjust the volume or use other control buttons, please use either your mobile phone or the primary speaker. When you power off the primary speaker, all connected speakers will power off.
• It is not recommended to switch the primary speaker.

CHARGING YOUR SPEAKER

• When charging, the LED indicators on the top of the speaker will flash red.
• When fully charged, the LED indicators on the top of the speaker will go out.

MAINTENANCE & CARE

• Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging.
• Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before charging.
• This speaker can stand up to splashes and spills. For the best performance, avoid exposing it to water or harsh weather conditions.
• The stakes should not be exposed to direct sunlight for lengthy periods as this may cause them to bend.
• Do not expose your speaker to high temperatures, or extreme cold.

ONE YEAR WARRANTY

1. Our products are covered by a 12-month limited warranty, starting from the date of purchase. This warranty is not transferable and applies only to the original consumer purchaser.
2. For quality-related issues, we will, at its sole option, repair or replace any products that malfunction due to defective parts or workmanship at no charge to you.

Not Covered Under Warranty:

• Damage from outside sources
• Damage from misuse of products including, but not limited to: falls, extreme temperatures, water, operating devices improperly, incorrect connections, and incorrect battery use)
• Damage caused by accident, improper care, negligence, excessive wear and tear, or improper installation or assembly contrary to any written installation instruction
• Items that have expired their warranty period
• Non quality-related issues after 30 days of purchase)
• Repairs through 3rd parties
• Any questions, please feel free to contact us.

WHAT WILL YOU GET

• Torch Light Bluetooth Speaker ×2 / Stake ×2 / Wall Mount×2
• Hook ×2 / Type-C Charging Cable×2 / Welcome Guide×1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>