db DVRIVE DBT150 Rocker Switch Bluetooth Controller User Guide
- June 1, 2024
- db DVRIVE
Table of Contents
db DVRIVE DBT150 Rocker Switch Bluetooth Controller
Quick Guide
Wiring Installation Instructions
- Power (Red) – Connect to+ 12V for Power
- Ground (Black) – Connect to -12V for Ground
- Remote Out (Blue) – Connect to Amplifier Remote
- Wire To turn on amp when the DBT100 is Powered on
- Main Out (Black) – Connect to input of amplifier
- Aux In (Black) – Connect to an optional auxiliary source other than Bluetooth
- DBT100 was designed to mount in a standard Carling-style opening
Bluetooth Pairing Instructions
- Step 1: Turn on DBT150 by pressing power button which will illuminate in white while the mode button will be blinking green.
- Step 2: Activate Bluetooth setting on audio device (cell phone, mp3 player, etc.). Find and select DBT100 on list of available devices.
- Step 3: Once Bluetooth audio source is paired with DBT150, the mode button will stop blinking and remain illuminating green, indicating that pairing has successfully connected.
*Anv time after initial pairing, when DBT150 is powered on and in range of paired device, it will automatically connect to the recently paired device, if it is not paired with anv other device.
302 Hanmore Industrial Parkwav •
Harlingen, TX 78550 Phone: 956-421-4200
• Fax: 956-421-4513
orders@dbdrive.net DB Drive.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>