Duratherm Curved Heated Towel Rail Instruction Manual
- June 17, 2024
- DuraTherm
Table of Contents
Duratherm Curved Heated Towel Rail
Installation Steps
Step 1
- Prepare the wall by marking the drill holes using a level to ensure they are horizontally aligned.
Step 2
- Drill holes at the marked positions and insert wall anchors.
Step 3
- Attach the mounting brackets to the wall using screws through the wall anchors.
Step 4
- Hang the towel rail onto the mounted brackets and secure it in place.
Step 5
- Ensure the towel rail is securely fastened and level.
Specifications
| Component | Description |
|---|---|
| Wall Anchors | For securing mounting brackets into the wall |
| Mounting Brackets | To support the weight of the towel rail |
| Screws | For attaching mounting brackets to the wall |
| Towel Rail | The main structure to hold towels |
FAQ
- What tools are needed for installation?
- You will need an adjustable wrench, tape measure, spirit level, and a drill with an 8.0mm drill bit.
- Can I install the towel rail by myself?
- It is recommended that installation be completed by a suitably qualified person, but if you have experience with such tasks, you may be able to do it yourself with caution.
- How do I make sure the towel rail is level?
- Use a spirit level when marking the drill holes and again after mounting the towel rail to ensure it is perfectly horizontal.
- What should I do with the packaging after installation?
- Please dispose of the packaging responsibly, recycling materials where possible.
Towel Rail Installation
- review instructions carefully before installation
- installation should be completed by a suitably qualified person
- please dispose of packaging in a responsible manner
Tools Required
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>