Shenzhen Future Smart Glasses WL2002 Open Type Audio Smart Eyewear User Manual
- June 5, 2024
- Shenzhen Future Smart Glasses
Table of Contents
Shenzhen Future Smart Glasses WL2002 Open Type Audio Smart Eyewear
Statement
Thank you for using this digital product of our company To make sure you use
the device correctly, please read the manual carefully before you startusing
this smart
eyewear. The content of this manual may change in further according to the
upgraded product performance and functions. We are sorry for no further notice
about
the content change
Product Model: WL2002., open type audio smart eyewear
Specifications
| NO | Item | Description |
|---|---|---|
| 1 | Main Chip | Qualcomm QCC3003 Bluetooth 5 0 |
| 2 | Vocal Tract | Twin speake 「 sStereophonic |
| LiR- ion Battery 120mAH/3 7V ated WO 「 king hou 「 s 3 SH |
Charging time 1
aR ted stand b y tiHme 120H
3| Battery
4| Charging| DC5V, Magnetic suction interface
5| Working Temp| Max charge current 120mA, Operation temp 10-60 °C
6| SD Temp|
Packing list
- Eyeglasses/Sunglasses
- Cable
- Pouch
- Manual
- Warranty Card
Operation Instructions
On/Off
- Press&hold the button for 3 seconds to start up.The indicatorlamp keeps 1 second while the prompt tone says Power on”
- Press&hold the button for 3 seconds to turn off during working condition(non-voice call)The indicator lamp lasts 1 second while the prompt tone says Power off
Bluetooth Pairing
- Upon shutdown mode,it will automatically carry on Bluetooth pairing after a 3-second press&hold.There will be a notice” connecting” and indicator lamp continuous flashes.
- Upon shutdown mode, press&hold for 5 seconds to eliminate the earlier Bluetooth pairing and notice pairing ,while indicator lamp continuous flashing.
- Upon working mode,not yet connected with mobile, the indicator lamp flashes once a second. The light will be off after eyewear succeed to connect with your mobile.
- It will voice-notice”connecting when eyewear is pairing back with mobile.It will voice-notice connected” when Bluetooth pairing is done.lt will voice-notice disconnected” when eyewear disconnect with mobile.
- When there is no matching record,there the device will automatically enter the matching state once it is turned on.When there is a matching record,there the device will automatically re-connect with the latest used mobile phone once it is turned on,
Music Play
- Quick click 3 timesthe power button to switch to previous song
- Quick click twice to switch to next song.
- Click the power button for 1 time to pause or play.
Voice Assistant
Upon pairing state with Bluetooth standby,quick click twice the power button
to start up voice assistant, similar with using Siri,
Phone Call
- It will ring”‘ding ling.. when comes the phone call,
- Click power button one time to answer.
- Click power button one time to end the conversation.
- Click power button twice to reject the call.
- Quick click power button 3 times to callback the last contact number.
- During the call,click one time to end current conversation and answer the third partywhen comes in another phone call.To click twice the power button to maintain and continue the current conversation.
- During the call,switch the conversation between via eyewear and via mobile by pressëhold 3 seconds each time.
Charge
- During charging the device, indicator lamp remains flashing.Lights out when it finish the charging.
- It will display the battery status of smart eyewear on the Mobile. (smart cellphone).
- Charging temperature range:0-45C
Warm Prompt
- Please read the manual carefully before you start using this smart eyewear. Please keep this manual.
- Please get the device fully charged the first time you use it.
- lf the product has not been charged for long(over 2 weeks), please get the device charged before you continuous to use it.
- Please do not directly wipe the lenses which are full of dirt and dust Instead, make the lenses wet and then wipe them by using soft microfiber cleaning cloth. Please do not wipe with too much pressure when you clean the surface of lenses. Please wipe the lenses with cleaning cloth in the same direction rather than rubbing them in circles upon the surface
Warning
- Please do not disassemble or repair this product on your own by any reason,or it will cause fire,electron puncture or even completely destroy this product.
- Please do not place the product in con dition of extreme temperature (below 0’C or above 45’C)
- Please do not place the product into water or directly wash it with any liquid.
- Please do not expose it in the sun lights for a long period of time, for fear of potential deforming.aging and fragile.
- Please do not put the magnetic suction part of charging wire close to metal objects to avoid short circuit
After-Sales contact
Producer: Shenzhen Future SmartGlasses Co., Ltd,
Address: Room 830 No.4 Building of Qidi Xiexin, NO.333 Dragonfly
Road,Huangge Community Longgang District, Shenzhen China
Manufacturer: Shenzhen Future Smart Glasses Co.,Ltd.
Important Safety Instruction;
- To make sure you use the device correctly and safely, please read all the safety instructions in this manual carefully before you start using this smart eyewear.
- Any power source,charging or battery which are not approved by producer may cause fire hazard,explosion or other unpredic- table danger.
- Please use the qualified and assorted accessories under the recommendation of producer.
- Please use the device in temperature condition 0-35 C.Please store the product and accessories within temperature range of 20-45C.Exclusively high or low temperature will cause device failure or function disable.
- Non-detachable built-in battery has been assembled. Please do not replace the battery by yourself for fear of battery and device damages.Batteries can only be replaced in authorized service center.
- Please disconnect the charging and device when the charging is finished. Then unplug the charger from mains jack.Do not charge for more than 12 hours.
- Please do not mix the spent battery with household waste. Improper disposal of battery may cause fire or explosion.Please deal with the spent device, battery or its accessories in accordance with the local regulations.
- It is forbidden to tear apart,collide,squeezed or throw the eyewear into a fire. Do not continue to use the device if the battery is seriously inflated.Please do not place the device in high temperature environment, for overheat battery may cause explosion.Please do not dissemble, collide or squeeze the battery to avoid leakage, overheating and explosion.Please keep the device dry.
- To avoid hearing damage,please do not keep using high volume for a long period of time
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.