ESPUK Motorised CameraQSG IPC J23 Motorised Camera Instruction Manual

ESPUK Motorised CameraQSG IPC J23 Motorised Camera

Specifications:

• Power Interface: DC12V
• Features: Infrared LED/White LED, Ethernet interface
• Installation Requirements: Moisture protection, suitable ingress protected box

Product Usage Instructions

A. Installation Steps:

1. Loosen the housing grub screw if applicable.
2. Align the install marks on the base and housing.
3. Mount the base securely with the camera and cable in position.
4. Align the install marks on the base and housing, then rotate the housing to secure.
5. Tighten the housing grub screw if applicable.

B. Camera Mounting Steps:

1. Loosen the locknut and arm screws.
2. Mount the base securely with the camera and cable in position.
3. Adjust the camera angle and tighten the locknut and arm screws to secure.

C. Lens Installation Steps:

1. Connect all cables of the ceiling and your camera.
2. Lead self-tapping screws through the guide holes in the camera base to fix your camera on the ceiling using a screwdriver.
3. Rotate the lens base horizontally.
4. Loosen the fastening screws and rotate the lens vertically.
5. Rotate the lens horizontally.
6. Align the screw holes in the base and tighten the three torx screws on the edge of the transparent dome cover to fix it.

Note: For detailed installation and setup instructions, refer to the product manual available online.

FAQ

Q: Is this product user-serviceable?

A: No, this product is not user-serviceable. It must be installed by a qualified person.

Q: Where can I find the latest product manuals and software?

A: The latest product manuals and software are available online at the following link: Product Manuals & Software

PRODUCT IDENTIFICATION

Note: The connections are not to be exposed to moisture, therefore the connections are to be made internally or housed in a suitable ingress protected box.

INSTALLATION

1. Untighten the housing grub screw if applicable
2. Align the install marks on base and housing
3. With camera and cable in position, mount the base securely
4. Align the install marks on base and housing, then rotate housing to secure
5. Tighten housing grub screw if applicable

1. Untighten the locknut and arm screws
2. With camera and cable in position, mount the base securely
3. Adjust the camera angle and tighten locknut and arm screws to secure

1. Connect all cables of the ceiling and your camera
2. Lead self-tapping screws through the guide holes in the camera base, and fix your camera on the ceiling by using a screwdriver
3. Rotate the lens base horizontally
4. Loosen the fastening screws and rotate the lens vertically
5. Rotate the lens horizontally
6. Align the screw holes in the base and tighten the three torx screws on the edge of the transparent dome cover to fix it.

Health & Safety

• This unit must be installed by a suitable qualified person. Please ensure that all installations comply with the current IEE regulations.
• For reasons of space and clarity not every system has been included and the diagrams have been simplified.
• The product is not user servicable. Do not dismantle this product.
• Due to our policy of continuous product improvement and development, the specifications in this guide may be subject to change without prior notice.

The latest product manuals and software is available online:

https://www.espuk.com/technical_support/

Elite Security Products UK, Unit 7 Target Park, Shawbank Road, Lakeside, Redditch, Worcestershire, B98 8YN

Tel: +44(0) 1527 51 51 50
Fax: +44(0) 1527 15 01 43
Email: info@espuk.com
Registered in England, Company Registration Number: 02769392, VAT Registration: GB614686525
For more product information please visit www.espuk.com
E&OE – Errors and Omissions Excepted. J23

References

• ESP UK - Technical Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>