Mytrix 800×300×4mm Pink RGB Gaming Mouse Pad Instruction Manual
- June 17, 2024
- mytrix
Table of Contents
Mytrix 800×300×4mm Pink RGB Gaming Mouse Pad Instruction Manual
Reason Analysis:
- Mouse pads are flat when they leave the factory, but after long sea transport and storage, they may become curled and uneven, even heavy objects can’t restore them to their original state.
- Another reason is that the factory’s light strip circumference is relatively larger than the rubber pad’s, leading to unevenness after curling and shaping.
Steps Step
1 Peel off the bottom sticker on the back of the control switch – remove the
screws and take out the controller
Step 2: Pull on one end of the strip and push the rubber pad to one side until
the entire rubber pad is pushed flat, at which point the strip exposed at the
controller will be longer than before.
Step 3Cut off the excess light bar according to the controller bay
and install the control switch.
Smooth out the rubber mat and cut the light bar short after:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>