i-box 79316PI-17IM Astral Galaxy Projector Bluetooth Speaker Instruction Manual

79316PI-17IM Astral Galaxy Projector Bluetooth Speaker

Galaxy Projector with Wireless Speaker

Introduction

Astral is a light projector with a difference, it boasts an attractive, modern design and has a mixture of lighting modes to suit any mood.
Two 3W stereo sound speakers gives you crystal clear audio, pair the Astral up with any Bluetooth device and you can enjoy your favourite music too.
Features include

• A rotating galaxy lighting effect and different light modes that you can select to create your perfect light scape.
• A separate laser projector that casts beautiful pin-point sharp stars onto the colourful galactic clouds.
• Astral can tilt up to 45° allowing light to be projected to the centre of the room from different positions
• Wide projection angle up to 120°

Caring for your Astral Projector

Important: please read these instructions carefully before using your Astral projector.
Do not place naked flame sources, such as lighted candles on or near the Astral.
Keep away from dripping or splashed liquids.
The unit should not be exposed to direct sunlight, very high or low temperatures,moisture, strong magnetic fields high frequencies and dusty environments.
Always leave sufficient space around the unit for ventilation.
Do not use abrasives, thinner or other solvents to clean the unit. To clean, wipe with a damp, clean, soft cloth.
Never attempt to insert wires, pins or other such objects into the vents or opening of the unit. Do not disassemble or modify the unit, there are no user serviceable parts. If the Astral is damaged or malfunctions do not use. Consult a qualified service engineer.
This product contains a Lithium coin cell battery keep the battery away from children. The battery could be harmful if swallowed. Seek immediate medical advice if you believe a battery has been swallowed.
Do not dispose of this product with household waste at the end of its lifecycle; take it to a designated collection centre for the recycling of electrical and electronic appliances with batteries. Please check with your Local Authority for recycling advice.
WARNING: This product is equipped with a class 1 laser. Avoid looking directly into the laser beam or pointing it at other people.
The Astral Projector is not a toy. Do not let children play with it unsupervised.

Controls & Features

Top View
Sound Controls
Projector Controls
Controls & Features – Top Panel & Remote

1. Power On /Off Key

2. LASER Star Projector

3. Galaxy Projector Dome

4. LASER On/Off

5. Galaxy Preset Sequences

6. Galaxy Rotation Speed

7. Bluetooth Key

8. Volume +

9. Volume

10. Mute Key
    Controls & Features – Remote Control and Base

11. Sleep Timer

12. Galaxy Projector Brightness

13. LASER – Star Brightness
    14-21. Galaxy Colour Modes
    22. Next Track
    23. Previous Track
    24. Play/Pause
    25. USB-C Power Supply Input
    26. Tilted Bases

Box Contents

1. i-box Astral Projector
2. Remote Control
3. AC – USB-C Adaptor
4. USB-C Cable
5. User Guide & Quick Start Guide

Powering your Astral

To power the i-box Astral, plug the AC to USB-C adaptor into a mains socket, connect the adaptor to the USB-C port (25) on the base of the Astral with the USB-C cable supplied.
To switch the Astral ON/OFF press the key (1) on the control panel or the remote. The projectors will come on immediately and the Astral will also enter Bluetooth pairing mode.
The remote control is powered by a CR2032 lithium coin cell to power the remote you must first pull out the protective plastic tab.

Projector Functions

The Astral features two seperate projectors, an LED galaxy projector for a background light effect depicting galactic clouds or nebulae and a laser projector that casts beautiful pin-point sharp stars onto the colourful galactic clouds.
The galaxy projector rotates and the brightness, eight colour combinations, the squence of colours and the speed of rotation can all be controlled and there is also a restful slow pulsing or breathing cycle you can select in which the light repeatedly slowly dims and brightens.
The laser projector controls are independent of the galaxy projector and you can adjust the brightness of the stars select a pulsing/breathing mode (for the stars) or switch them OFF if you just want to gaze at the galactic clouds.

Laser / Star Projector Controls

ON/OFF : To turn the Laser Star projector ON/OFF Press key (4) on the top panel or on the remote. Brightness: To adjust the brightness of the Stars or select the pulsing/breathing effect. Press the Laser Brightness key (13) on the remote.
Options: Bright/Medium/Dim/Breathing Cycle

Galaxy Projector Controls

Selecting Preset Galaxy Sequences:
There are 14 different preprogrammed sequences showcasing the range of lighting effects and colours the Glaxy is cable of.
Some are slow and gentle with restful colours others faster and more dramatic, choose the best one to fit your mood.
Press the Mode key (5) repeatedly to change.

Selecting Galaxy Background Colour:
Press keys 14-21 to select one of the eight available colour combinations for the Galaxy background. Adjusting Galaxy Brightness:
To adjust the brightness of the Galaxy background press the Galaxy Brightness key (12) on the remote control.
Choose from; Medium / Bright / Off / Dim. Adjusting Galaxy Rotation Speed:
To adjust the speed of the Astral projection light rotation press the Projection Light Rotation key (6).
Choose from; Off, Slow, Medium, Fast

Sound Controls

Bluetooth Mode The Astral enters pairing mode automatically enters pairing mode when powered on or connects with the last device paired if it is in range. You can also initiate pairing mode by pressing the BT key (7) on the top panel.
To connect a compatible Bluetooth device, follow the steps below:When successfully connected to a compatible device, the Astral will make an audible tone confirming a successful connection.
You don’t need to re-pair. The Astral will automatically reconnect with this device when it is in range and both are turned on.
You can control audio using both the keys on the top panel of the Astral and those on the remote control;

Press BT (7) to disconnect the Bluetooth device currently connected.

Sleep Timer
If you are using the Astral at bedtime and don’t want it to stay on all night when you fall asleep with it on, you can set the sleep timer to switch it off automatically.
To set an active sleep timer, short press the Sleep Timer key (11) to set 15 minute increment sleep timer periods. An audible tone will indicate how long the sleep timer is set four. 1 tone: 15 minutes, 2 tones: 30 minutes, 3 tone: 45 minutes, 4 tone: 60 minutes, no tone: OFF After the set time the Astral will switch off completely both the light projectors and the audio.
To deactivate the sleep timer, short press the Sleep Timer key (11) repeat no audible tone is heard.

Replacing the Remote Control Battery

The remote control is powered by a CR2032 3V Lithium coin battery.
Replacement instructions are shown on the back of the remote control. Push the release catch and pull out the battery tray as shown. Remove the old battery and replace with a new CR2032 battery making sure it is the right way up with the + terminal facing upwards.
Please dispose of the used battery responsibly, take it to a designated recycling collection point for waste batteries.
Specifications

Troubleshooting

Check that the star projector is switched on.
The star projector does not turn on| Connect the star projector to the power adaptor and ensure adaptor is plugged into a live mains
power socket.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Declaration of conformity

Hereby, Philex Electronic Ltd. declares that the radio equipment: model i-box Astral for wireless reception in domestic premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc

Technical support

For further help, advice, information or live chat visit www.iboxstyle.com

ErP/EuP directive No. (EU) 2019(1782)
Power Supply

Manufacturer/Address|
Philex Electronic Ltd.
Kingfisher Wharf, London Road,Bedford, United Kingdom.
Registration No. 339123
---|---
Model identifier| OBL-0502000RU
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 5VDC
Output current| 2A
Output power| 10W
Average active efficiency| 82.10%
Efficiency at low load (10 %)| 76.70%
No-load power consumption| 0.073W

UK Distributor
Philex Electronic Ltd.
Kingfisher Wharf, London Road, Bedford,
MK42 0NX, United Kingdom.
Made in China
EU Distributor
Philex Electronic Ireland Ltd.,
Robwyn House, Corrintra, Castleblayney,
Co. Monaghan
A75 YX76, Ireland.
© Philex Electronic Ltd 2021. vb1.2

References

• i-box

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>