LG 55TR3DK-B Digital Signage Monitor Owner’s Manual
- June 17, 2024
- LG
Table of Contents
LG 55TR3DK-B Digital Signage Monitor Owner's Manual
WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
Getting to Know the Product
Checking Components
An electronic blackboard is a display product that can be used by touching the screen. A touch pen, remote control and others are provided with the product. If any of the listed components are missing, contact customer support. LG Electronics also sells optional components that can help you use the product more effectively as separate purchases. Product specifications or components may change without prior notice according to the quality improvements or feature upgrades.
⚠ Caution
- To ensure user safety and product longevity, do not use counterfeit products. If the product is damaged as a result of using counterfeits, the warranty does not apply. In such cases, the user cannot be compensated even if injured.
- If the product is used in an environment with excessive dust, the warranty does not apply. Note
- Remove all tapes attached to the front before connecting the product to power.
- Cables used when connecting to external devices must be purchased separately.
- Keep the product box and do not discard it. It can be used when moving the product.
Checking Optional Components
Optional components may change without prior notice to improve product
performance. New components may be added.
Note
- All optional components are separate purchases. Contact LG Electronics if you wish to purchase them.
- Component images shown in the owner’s manual are for the user’s understanding and may differ from actual components.
Installing the Product
Installing on Wall
The electronic blackboard can be used in a wall-mounted format by securing it to a wall. To install it on a wall, first attach a wall mount support (optional) to the back of the product body. The wall mount support is a separate purchase and can be purchased from a nearby dealer. For more information on installing a wall mount support, see the installation guide provided with your wall mount support purchase.
Checking Wall Mount Support Specifications
When installing a wall mount support, you must use screws and brackets that comply with VESA (Video Electronics Standards Association) standard specifications.
⚠ Caution
- Disconnect the power cord first before moving or installing the product. There is risk of electric shock.
- Do not install the product on a ceiling or sloped wall. There is a risk of falling and injury.
- If you tighten the screws too tightly and damage the product, the warranty may not apply.
- Use screws and brackets for wall mounting that meet the VESA standard specifications. The warranty does not apply to the breakage or personal injury due to the use of incorrect components.
- Using screws longer than VESA standard specifications when installing a wall mount support may damage the interior of the product. In such cases, we do not take responsibility for any damage or issues that may arise with the product.
Installing the Product
Allow at least 10 cm of clearance from the wall for ventilation, and install the product with care to prevent it from falling. When purchasing a wall mount support, the installation guide and all necessary parts are included. A wall mount support can be purchased separately from a nearby dealer.
Connecting to Power
Note
- The screen may flicker if the product is turned on when it is cold. This is normal, so there is no need to worry. 8
Exploring the Product
Names of Each Part
Front
Back
Side
Checking the Input/Output Terminals
Check the location and function of the input/output terminals for connecting external devices to the electronic blackboard.
Front Cable Terminal
Side Cable Terminal
Bottom Cable Terminal
Using the Touch Pen
The touch pen can be used for various purposes, such as touching the screen to launch menus or to take notes, annotate, and draw on data.
Getting to Know the Touch Pen Functions
Two pens can be used simultaneously to write or draw together. Different
colours can be assigned to each pen. A pen has a 3 mm and 8 mm tip at each
end, allowing you to use two modes separately with one pen.
Note · If you press the pen on the screen for about 2 seconds and release it after you open a built-in PC (OPS), PDF viewer, or Word document, the same pop-up menu as when you right-click on the mouse will appear.
Storing the Pen
The touch pen can be attached to the magnetic touch pen holder to keep it in place, so you don’t lose it.
Replacing the Pen Tip
If the touch pen tip is worn or damaged, it must be replaced with a new tip.
- Remove the old tip by pulling on the end with tools such as tweezers.
- Slide the new tip into the pen body.
Note · To purchase additional touch pens or spare tips, contact LG Electronics.
Precautions for Use
Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Afterimage
-
After-image appears when the product is turned off.
– Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-saver function.
– Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product. -
When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.
-
Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.
Recommended Usage Condition
Product Specifications
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. The symbol means alternating current, and the symbol means direct current.
Touch screen
Speaker
Specifications by Model
Resolution
Note
-
Vertical Frequency: The monitor screen functions by the screen image changing dozens of times every second
like a fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz. -
Horizontal Frequency: The horizontal interval is the time taken to display one horizontal line. When one
is divided by the horizontal interval, the number of horizontal lines displayed every second is the horizontal frequency. The unit is kHz.
VGA (PC) Support Mode
USB Type-C Supported Mode
HDMI / OPS Supported Mode
Licence
Supported licenses may differ by model. Visit www.lg.com for more information on licenses.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
The model and serial number of the product are located on the back and on one
side of the product. Record them below in case you ever need service.
MODEL
SERIAL NO.
Temporary noise is normal when powering ON or OFF this device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>