VSP NX Witness Release Document User Guide

NX WITNESS 5.1
RELEASE DOCUMENT

This document includes new features and how to implement these features created by VIDEO SECURITY PRODUCTS PTY LTD

NX VERSION 5.1 RELEASE NOTES

CHANGES AND KNOWN ISSUES
Support for Windows 8.1 will be discontinued in the next release, after 5.1. systems on Windows 8.1 may not be able to update to the next release.
NX Witness mobile version 22.4 is not compatible with 5.1. When updating please ensure all uses using mobile app have updated to latest release.
Support for Ubuntu 16.04 is discontinued.
Support for macOS 10.15 is discontinued.
OPERATING SYSTEMS/PLATFORMS
Added Ubuntu 22.04 support
Added macOS 13 Support

NEW FEATURES

CROSS CLOUD LAYOUTS
A user can now view cameras from different systems in the desktop client. This means systems do not need to be merged to create layouts and view cameras.
Feature is available only in the desktop client.
The layout cannot be shared with other users.
Cross cloud layouts cannot be used for videowall, showreels or event rules.
To set up:
Drag a camera’s f rom your current server on to the layout Click on your “Other Systems” tab In your dropdown menu, find the system that you want a camera from and expand that system.
Click and drag the camera(s) you want into the layout To save right click on the layout and save cloud layout as.
You will notice here that the layout has a cloud next to it showing that is it a cross system layout Requirements:

• Both systems on version 5.1
• Client Software being used, not available on web client or mobile app

CAMERA REPLACEMENT TOOL
It is now possible to replace a camera that has become offline with one on the current server. Name, archive, general and advanced settings, recording setting, PTZ Settings, event rules, analytics and camera access rights will be transferred to the new camera. The archive from the old camera will now be available on the new camera. Please note here that if the new camera does not support some of the settings, they will not be transferred.
To do this:

• Right click on the offline camera
•  Go to “Replace Camera”
• A pop-up window will appear
• Find the camera that will be replacing the offline camera
•  Click “Next”
•  The “Data for Transfer” window will appear. This will tell you what is being transferred and if there are any issues (example shown below)
• Motion detection settings, 2-way audio will not be transferred.
• Camera Replacement can only be done by the owner and Administrator of the system. This tool is not supported for the below:
• Virtual Cameras
• Speakers
•  NVR’s
•  IO Modules
•  Multi-Sensor Cameras
•  Unauthorized cameras
•  Offline Cameras that appear after reindexing the archive

LOGS
Logs can now be downloaded and set up from the client. This is done for both Server and Client.
SERVER LOGS
To access:

• System Administration
• Advanced
•  Logs Management
•  Download

In multi-server set ups you need to click on the server that you need to run the logs on.
CLIENT LOGS
To download client settings:

• Menu in top right-hand corner of the client
• Go to Local Settings
• Go to Advanced tab
•  Logs Management
• Download

When a ticket is lodged with NX, you may be asked to change the parameters of the log, or logging level.
To do this, for either client or server logs, follow above steps and click settings.
The below screen will pop up.Follow directions given to you by the VSP tech team and run.
SPECIFIC ONVIF PROFILES FOR CAMERAS
The ability to choose specific ONVIF profiles for cameras have been added in the “Expert Tab”. The ONVIF profile list is determined ONLY when adding the camera to the server. If ONVIF profiles are reconfigured after camera is added (on the camera itself), they will not be reflected in the Desktop Client.
To find the ONVIF Profiles:

• Add camera to NX
• Right Click on the camera and go to camera settings.
• Select the expert tab.
• The ONVIF Profiles section is about halfway down the page as shown below.

If you are unsure if this is needed, please contact VSP tech support. If changes have been made here, please advise support when talking with them.

IMPROVEMENTS

MIN/MAX ARCHIVE RETENTION
Able to select min and max retention periods in minutes, hours and days, whereas previously is was only days.
This is found in camera settings and recording screen.
To select this:

• Right click on the camera
• Select Camera settings
• Go to recording tab
• Keep archive for section (at the bottom of the pop-up window)
•  Unselect Auto
•  Select the required time in minimum or maximum time
•  Click the drop-down menu and select day minute or hour

MOTION DATABASE
Motion database has been moved from the System storage to the archive storage location.
This means that the motion database will now be stored where the analytics data is stored as shown below. A system notification has been added to alert that Local storage is being used for analytic and motion data. This can be turned off in local settings. SERVER CONNECTIONS TO NX CLOUD
Server connections to and disconnections from the cloud are now logged in the audit trail. This means when you add or remove a system from the cloud it is now logged in the audit trail as per below. POWER MANAGEMENT SETTING
A power management setting has been added that allows computers to sleep while the Desktop Client is still open.
To Enable this:

• Click on the menu button at the top left-hand corner of the NX client
• Go to Local Settings
• In the General Tap there is a tick box at the bottom of the page named “Ällow the computer to enter sleep mode on idle”

Showreels no longer displays a title bar on top with the camera name Support for MPEG RTSP video streams has been added The maximum value for LogicalID is set to 999999
BOOKMARKS AND OBJECT ATTRIBUTES
Previously, bookmarks and attributes could only be found if text matched the 3 symbols from the beginning of the word. Now the search can be performed by text in the middle of the string (minimum 3 symbols) PORTS FOR CAMERA WEBPAGE
Specific Ports for viewing a camera webpage can be redefined on the expert tab in camera settings.

• Right click on the camera
• Go to camera settings
•  Select Expert Tab
•  On the right hand side of the page under webpage you can change the port

DO HTTP REQUEST UPDATED
The “Do HTTP Request” action now supports PATCH requests. This was possible in version 4.2, but due to an API upgrade was not implemented in 5.0. Supported again in version 5.1
USE SOURCE CAMERA IN CAMERA RULE
The use source camera option has been added to all camera-related actions. Previously you would have to select the same camera used in the event section from the camera list, if needing the action on the same camera. Now all you need to do is click Also set on source camera. The tick box is found under the drop down menu in the “Action” section. SOUND DURATION – CAMERA RULES
The sound duration for the “Play Sound” and “Repeat Sound” action has been increased from 10 to 30 seconds.
MOBILE USER MANUAL
The Mobile user manual has been added to the desktop client installation package. When the client is installed, youwill get a shortcut to “NX Witness – Mobile Help” document.
SHOW TEXT OVERLAY – CAMERA RULES
The “Show Text Overlay” action in camera rules can now show more text.
BACKUP AND RESTORE
Backup and Restore has been moved to the “Advanced” tab of the “System Administration” dialogue REQUESTING RTSP STREAMS
When using API requests, if requesting RTSP Streams from the server, it is now possible to specify Audio Code parameters.
AVERAGE CAMERA BITRATE
The average bitrate property has been added to the camera statistics health report. This will allow users to see the average bitrate, if looking to move to a cloud storage option.
For systems connected to NX Cloud, this is available on the cloud portal

• Click on the system
• Information Tab
• Cameras (you may have to scroll right depending on the screen size you are using) This is also available in the server webpage locally
• Information tab
•  Cameras (you may have to scroll right depending on the screen size you are using)

OVERALL SERVER PERFORMANCE
The overall server performance has been improved. The number of requests being sent by Desktop Client to server was significantly reduced which should improve performance for big systems.
USB JOYSTICKS FOR PTZ CONTROL
Added a general support of all USB joysticks to control PTZ and layouts. Once a joystick is connected to the Desktop client machine, the corresponding menu item will show up in the main menu. This feature is only supported in Windows.
CHANGES TO THE “NEW SYSTEM” SETUP
Added New options to the new system setup wizard.
ADVANCED SYSTEM SETTINGS
Users can now turn on or off the below settings from the new system setup wizard

• Allow device setting optimisation
• Enable device auto discovery
• Send anonymous usage statistics and crash reports

SECURITY LEVELS
Users now have the choice between to security levels in the new system setup wizard. STA
NDARD SECURITY LEVEL

• Encrypt video traffic to desktop and mobile client is disabled
• Camera credentials are shown in “Camera Settings”
• Server IP shows in API responses

HIGH SECURITY LEVEL

• Encrypt video traffic to desktop and mobile client is enabled
• Camera credentials are not shown in Camera Settings
• Server IP is not shown in API responses

MAX SIZE OF THE TITLE
The max size of the title on the welcome screen was increased up to 60 pixels.
ANALYTICS IMPROVEMENTS AND NEW ANALYTICS
Axis
Axis LPR Analytics add with Axis plate verifier
VIVOTEK
VIVOTEK LPR Analytics added. At time of publish this supports the old VIVOTEK LPR (IB9365-LPR-12-40mm) model.
Please contact your VSP representative for information on the new VIVOTEK LPR integration.
Hikvision

• Hikvision analytics plugin was optimised to reduce the number of LPR requests
• Fixed wrong object bounding boxes on some cameras
• Objects were sometimes not shown on the camera with the new firmware. This has been fixed
• Analytics events were sometimes not triggered on the new firmware. This has been fixed
• Duplicate Objects were sent sometimes. This has been fixed
• Sometimes Hikvision LPR could not recognize a license plate, but still sent wrong objects. This has been fixed

NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES

Axis
Newly Support devices

• P3727-PLE

• P3267-LVE

• P3267-LV

• M4308-PLE

• P3265-LVE

• P3265-LV
  Multi Sensor Cameras

• P3727-PLE
  Encoders Added

• P7316
  Fixes

• Fixed issue with getting motion detection analytics events.

• A9188 IO Device did not work after upgrading 5.0. This has been fixed.

• P3727-PLE was discovered as an encoder. This has been fixed.

• Server could not get stream from the A9161 I/O device. This has been fixed.

• M2036-LE was discovered twice. This has been fixed

• Fixed issue adding a PTZ Preset on the Q6135 (firmware 11.x)

VIVOTEK
Advanced PTZ Support

• SD9384

• SD9161

•  SD9368
  Fixes

• Fixed issue with the primary stream for the MS9321-EHV

Hikvision
Newly supported Devices

• IPC-T260H-x (Hilook)
• DS-2CD7A26G0
•  DS-2CD2132-X
•  DS-2CD4A65-X
•  DS-2TD1217
•  DS-2CD45C5F-x
•  DS-2CD2347G2-x

Multi Sensor Cameras

• DS-2CD6984G0 Series
• DS-2TD1228
• DS-2TD1217-2/PA
• DS-2TD2628x

Advanced PTZ Support

• DS-2DE2A404IW-X

Encoders Added

• iDS-7216HUHI
• iDS-7216HUHI-m2/S
• DS-7104HGHI-F1
•  DS-7216HQI-K2
•  DS-7304HQHI-SH
•  DS7316HUHI-K1
•  DS-96128NI-i16
•  DS7716NXI-i4
• iDS9632NXI-i8/16s
•  iDS-9632nxi-i8/8f
•  iDS-7204HQHI-K1
•  iDS-7208HUHI-M2
•  iDS-7216HQHI-M2
•  iDS9632NXI-i8

Fixes

• Forced ONVIF PTZ for Hikvision DS-2CD2646XM, DS-2SC3Q140MY, DS-2TD4137, DS-2TD4035
• Fixed digest authentication for some Hikvision cameras

Others

• Milesight analytics added

• Uniview analytics added

• Added the smart motion detection event for Dahua

• Only attributes supported by devices are shown in the “Advanced search” dialog now.

• Bosch analytics plugin: Changed object’s speed to km/h or mi/h.

•  Dahua Intrusion (Cross Region Detection) was not triggered on Server. Fixed.

•  Added support for additional Dahua OEM devices: IPC-T5442T-ZE, ITC237-PU1B, ITC437-PW6M-x, DH-TPC-SD2221.

• Avigilon 24C-H4A-3MH-180, 12c-h4a-4mh-360

•  Bosch FLEXIDOME multi 7000i

• Dahua DH-TPC-BF1241

•  Digital Watchdog pz21m69tx, PVX20WATW, DWC-PPVX20WATW

•  LTS CMIP7553W4-x

• Iryx Corporation|IX-VT22A-M04

•  Uniview IPC9312LFW-AF28-2X4, IPC94144SFW-X25-F40C

•  Tyco Illustra-Flex-16mp-MultiSensor

• Bolin Technology SD530SHD-x, EX1030x

• Dahua DH-SD5A445XA-HNR

• GeoVision GV-SD4825-IR

•  TOA N-C5500, N-C5700

• Milesight MS-C8241-X36

• ClearPix CPX-ENC40-H2

• Dahua N52B3P4, dh-hcvr5104he-s2, dh-nvr2108hs-8p-i2, dhi-nvr2104hsx, dhi-nvr5464-4ks2, dhi-nvr6a08-64-4ks2, hcvr4108hs3, hcvr8208a-s3, n41c1p2, n42c1p2, n52b2p, x72a2a2, x82a3a, xvr7416l-4kl-x, xvr7816s-4kl-x, dh-nvr5432-4k”, dhi-ivss7008-2i, dh-xvr5104hs-i3, dh-xvr5116hs-i3, dhi-nvr5216-16p-4ks2e

• IVSEC NVR NR308XC

• Dorani DORIP-13 Network Video Recorder

• Eneo vuhdip-16-3, vxh8ahd-4

•  Ganz Security ZN-AIBOX8

• Amcrest amdv108116-h5, amdv5108-ai, amdv5108-i3, amdv8m8-h5, amdvtenl8-h5

• Honeywell hve1, hve8, hve8x, hrhq1080l.

• TOA N-V5020-1

•  ORIVISION ZY-EH901

• Live streams were unstable for Uniview TIC2621-* cameras. Fixed.

•  Dropped support for the ACTI proprietary API integration and moved to ONVIF for the entire ACTi product line.

•  Digest authentication for Vista cameras did not work properly. Fixed.

•  Fixed invalid secondary stream configuration for Amcrest IP4M-1051.

• All models of i-PRO (Panasonic) devices will now use ONVIF Media2 by default.

•  Fixed an issue with initialization for Panasonic cameras.

• Image in PTZ mode unexpectedly zoomed while panning/tilting on Aviglion encoders. Fixed.

• PTZ failed to initialize on Dahua DH-TPC-BF1241-T multi-sensor thermal camera. Fixed.

•  Pelco IMV529-* uses ONVIF Media2 by default now.

• Fixed an issue with initialization of the first channel for Uniview IPC94144SFW-X25-F40C.

• Server ignored timezone and daylight saving attributes while setting the device time via ONVIF. Fixed

•  Fixed RTSP stream playback from TRUEN EPS-TSH device.

• Model and vendor were reversed for IP-Camera N5F2-ALAH2. Fixed.

• The signal input event from Lilin P3R8822E2 camera was not properly detected by the Server. Fixed.

• Fixed an issue that caused the initialization of Dahua IPC-PDBW5831 360 multi-sensor camera to fail.

• The MJPEG stream from Bosch cameras did not play back correctly. Fixed.

• Fixed motion detection issues on ArecontVision 3105 camera.

• Fixed an issue that caused live playback for Arecont 8185DN panoramic cameras to stop after some time.

•  Server could not get stream from Axis A9161 I/O device. Fixed.

• ArecontVision 10655DN did not show live video in the Desktop Client. Fixed.

• ONVIF Media2 is forced on PELCO IMV529-x.

• Fixed an issue with auto-discovery for Akuvox E12w and Axuvox R20BX5 smart doorbell.

• ArecontVision AV4956 and AV10956 are switched to Onvif.

• Fixed an issue with an incorrect vendor for Dahua IPC-HDW8341XN.
  Hanwha devices support/improvements/fixes:

• Visitor calling is detected in VMS.

• VMS operators can talk with visitors via 2-way audio.

•  VMS operators can open the door using a Soft Trigger.

• Sometimes an invalid device agent manifest error notification would appear during initialization. Fixed.

• Hanwha Road AI. Bounding box on item and object tile in the right panel were displayed when the object already disappeared from the video. Fixed.

• Fixed “Vehicle” object classification

• “Error in analytics plugin” notification appeared after some settings were changed. Fixed.

• Fixed object detection for cameras without BestShot support.

•  Fixed an issue with additional stop events for Face detection.

• Added Hanwha intercom support (simplified version)

•  Hanwha AI: The “Face detection” event did not appear in Plugin Settings for Hanwha analytics cameras. Fixed.

• Wisenet Road AI LPR: Added “CPU usage”, “Memory usage”, and “Thread count” in Camera Settings > Plugins.

• Hanwha Analytics:

• Sometimes the SPC2000 Joystick couldn’t be detected. Fixed.

• The timeline was inconsistent on NVR devices. Fixed.

• NVR archive did not load properly after swapping Overlap ID’s

• Some cameras lock up and become unauthorized after recording is turned on/off. Fixed.

• Input and output signals from XRN-1610SA were not properly detected by the Server. Fixed.

• Sometimes encoders were displayed with default names instead of user-defined. Fixed.

•  Server timezone is used now when exporting the video with timestamps.

•  Advanced Settings on Hanwha XNO-C8083R camera were not displayed. Fixed.

•  Fixed crash when playing/seeking an archive on Hanwha XRN NVR.

• The “tracking” caption was removed from object names in the Hanwha analytic plugin to make naming of object types consistent.

• Name of the color attributes on Hanwha devices was incorrect in the “Advanced search” dialog. Fixed.

•  Added support for ROI variable limits.

Bug Fixes

•  When playing an archive with different stream resolutions (low and high), the Desktop Client sometimes did notswitch to a secondary stream. Fixed.
• Enabling a plugin without saving changes (in Camera Settings > Plugins) prevented Plugin Settings from being shown.
• “Keep camera time settings” on the “Expert” tab was removed for RTSP and HTTP links.
• The “Ctrl+Enter” hotkey did not work for opening a chosen device in a new layout. Fixed.
• Drag and drop for multiple local files did not work on macOS. Fixed.
• Opening a zoom window while a video was paused caused the video to playback at high speed. Fixed.
• Fixed an issue with 2-way audio support for AXIS P8221 on the Mobile Client.
• Could not connect to cloud systems via the “Other systems” item in the resource tree. Fixed.
• In-client help could not be opened from the “Add External Storage” dialog. Fixed.
• The status bar during a Cloud merge sometimes got stuck (displayed “Merge in progress”) after the “mergeSystem” API request. Fixed.
• If a filter was applied when exporting a bookmark from Bookmark Log, it was not applied on the exported video. Fixed.
• Cloud user was automatically logged out in the Desktop Client if the PC has been in sleep mode more than 12 minutes. Fixed.
• Event log was not cleaned up according to the “eventLogPeriodDays” setting. Fixed.
• Fixed an issue with loading live previews for a big archive.
• Unplugging the joystick and plugging it back in, the joystick stopped working in the Desktop Client. Fixed.
• The last opened layouts would not open after restarting the Desktop Client. Fixed.
• Sometimes, multiple false unsuccessful login attempts showed up in Audit Log if the Desktop Client was left unattended with a logged-in user. Fixed.
• The Desktop Client could freeze after an Axis joystick was connected to the PC. Fixed.
• Web Admin showed an incorrect URL in “Camera details” for the RTSP transcoded streams. Fixed.
• Drag and drop did not work for Web pages on layout within the Desktop Client. Fixed.
• Unexpected “Not enough HDD/SDD speed” and “Archive integrity problem” notifications showed up if NAS was disconnected from the network. Fixed.
• Unreachable system names were displayed as Active on the welcome screen in the Desktop Client. Fixed.
• Could not select multiple resources with Shift in some dialogs (Events/Actions, User Roles etc). Fixed
• The Desktop Client could freeze while closing a big amount of layouts. Fixed.
• The “Post recording” setting did not work. Fixed.
• Screenshots were missing from Email notifications. Fixed.
• Could not add an administrator user after the ownership transfer process. Fixed.
• Fixed an issue with incorrect timestamps for videos exported via Cloud Portal.
• AAC audio could not be played back when browsing a video archive on the Desktop Client. Fixed.
• Fixed an issue that prevented cameras from being dragged and dropped between groups within the Resource Tree.
• Desktop Client would crash when hiding the calendar after searching on the Motion tab by selecting an area and multiple dates on the calendar. Fixed.
• Desktop could crash while running a showreel with 49+ layouts with 49+ cameras each. Fixed.
• Fixed Server crash and increased CPU usage when fetching RTSP from Arecont Vision cameras.
• Motion could not be disabled by hotkey if it was enabled by hotkey. Fixed.
• Playback could freeze for several seconds when rewinding the archive within the Desktop Client. Fixed.
•  The live stream became intermittent in some systems if a backup storage was used. Fixed.
• PTZ preset names in Korean could not be displayed in the Desktop Client. Fixed.
• Server could crash or work with degraded performance if using an SMB storage with poor bandwidth. Fixed.
•  The “&” symbol in layout or local file names was not shown in titles. Fixed.
• Files exported to .TS and .MKV format from USB cameras did not contain sound. Fixed.
•  VMS Server will no longer send ONVIF requests to cameras if auto discovery is turned off and the camera is registered with another server in the System.
• The RAM size for RPI4 was displayed incorrectly in the VMS Web Admin. Fixed.
•  The Desktop Client failed to connect to Cloud Systems that were unreachable through the Cloud, even if they were available locally. Fixed.
• Added support for AAC codec for video export to MP4.
• The Desktop Client would sometimes crash on M1 macOS devices. Fixed.
• Added support for SET_PARAMETER method of RTSP protocol.
• Certain cameras sometimes got deleted from the System after merging two Systems. Fixed.
• The “Setup New System” dialog did not show up if the certificate validation was disabled in the Desktop Client (local settings). Fixed.
• Desktop Client or Server could crash when saving a backup file bigger than 400MB. Fixed.
•  Web Admin might cause increased Server memory usage on big systems. Fixed.
•  The “Object” tab was not shown after reindexing an archive with objects. Fixed.
•  After creating a new user role and assigning resources they were not accessible by this role members. Fixed.
•  Bookmarks tooltip disappeared instantly after displaying. Fixed.
• Bookmarks were disappearing from the timeline after searching by keyword at the right panel. Fixed.
•  Fixed an issue with layout sorting in the Resource Tree.
• Incorrect OS version showed at the web admin interface for the servers running on Windows Server 2019. Fixed.
•  Backup footage was not updated during backup. Fixed.
• If detached a single Server from the System, multiple servers could be detached instead. Fixed.
•  Server could hang after some time because of token authorization. Fixed.
• Server could loose Cloud connection after some time. Fixed.
• Fixed incorrect shortcut hints for the buttons on scene items.
• The Showreel mode caused excess memory usage on the Desktop Client. Fixed.
•  Joysticks stopped working in the Desktop Client if unplugged and plugged back in. Fixed.
• The distributor name in the Support Signature field was not shown on the license dialog in the Desktop Client. Fixed.
• Sometimes the “Input on any camera” event stopped working after camera removal. Fixed.
• It was impossible to enable digest authorization for users imported from an LDAP server. Fixed.
• Server could crash while adding IPC-F20M camera. Fixed.
• Fixed an issue with camera recording, which could lead to system freeze.

API/SDK Changes/Fixes

• Get cloud and user token
• Set Locked/Unlocked layout settings
• Hide top menu controls (back button, refresh button, fullscreen, info).
• Many old API methods are ported to the new CRUD REST API.
•  Users with the “Live Viewer” permission only could get the list of storage locations via API. Fixed.
•  It’s allowed to omit unnecessary layout item id in /ec2/saveLayout handler.
•  Additional symbols were added when copy/paste from/to swagger web interface. Fixed.
•  The crop parameter provided in the /ec2/cameraThumbnail API did not work. Fixed.
•  Fixed an issue that caused the audio backchannel API (api/http_audio) not to play audio files.
•  The “timezoneUtcOffset” property was removed from the legacy Server API.
•  API rest/v1/servers/this and ec2/saveStorage allowed setting SMB storage for the analytics engine. Fixed.
•  Ability to define some settings as Active. This allows changing settings model and values on-the-fly, depending on what is selected in the UI. E.g. status checks, changing from imperial to metric units, etc.
• buttons, that can open Web Page or custom form
• non-editable hyperlink element
• password field type
•  placeholder
•  information banner
•  plugin settings shown right after plugin (device agent) activation (limitation: Active settings won’t work before activation)
• Ability to get user authentication info
• Ability to lock/unlock layouts
• Minimal interface mode, that allows integration to look more native (hiding browser controls)
• Ability to open a Web page from plugin settings.
•  For network API changes, see the API change log in the WebAdmin documentation.
•  The following abilities added to the In-Client Browser JavaScript API:
•  API improvements/fixes:
• Active Plugin Settings:
•  Plugin Settings improvements:
• JS API Improvements

Known Limitations

• Desktop client could freeze for a short period of time when dialogs are opened

Tested Operating Systems

• Windows 8.1, 10/Enterprise,11, 2012, 2012 R2, 2016 v1607, 2019, 2022
• Ubuntu LTS: 18.04, 20.04, 22.04
• macOS: 11.0 (Big Sur), 12 (Monterey), 13
• Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch))
• Raspberry Pi 4 Model B Raspbian 10 Buster

Contact your local sales rep or Colin, our Nx expert on colin@vspsolutions.com.au or 0429 165 174

CONTACT US
1800 22 88 28
vspsolutions.com.au
info@vspsolutions.com.au
ADELAIDE
30 Cawthorne St, Thebarton 5031
PH: 08 8354 4444
GOLD COAST
1/14 Indy Ct, Carrara QLD 4211
PH: 07 5596 0783
MELBOURNE
69A Matthews Avenue, Airport West 3042
Unit 9, 20 Duerdin St, Clayton 3168
PH: 03 9646 5340
PERTH
8/160 Balcatta Rd, Balcatta WA 6021
PH: 08 9345 3202
SYDNEY
7/19 Unwins Bridge Rd, St Peters 2044
PH: 02 9557 7946
SYDNEY DISTRIBUTION CENTRE
2/12 Sterling Rd, Minchinbury 2770
PH: 02 9557 7946

References

• Home page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>