INSMART ME10 2.0 CH Multimedia Speaker User Manual

INSMART ME10 2.0 CH Multimedia Speaker

SPECIFICATIONS

1. Built OCL amplifier, Compatible for Computer, Notebook/Tablet/Smartphone/ Mp3 player and so on
2. Magnetic shielded treatment designed, able to be configured with computers;
3. Creating a larger dynamic range in the low frequency, a smoother middle frequency, and a pure and harmonious high frequency;

OPERATION

1. Please connect the sound sources and powers in accordance with the sketch map;
2. Open your sound sources, then adjust the volume knobs of the different channels for a satisfied personalized effect;
3. After your use, please unplug the power

ATTENTION

1. Please turn the volume knob to the minimum position before your operation to prevent any damage to the speakers due to the instant impact;
2. Please avoid being exposed or put in humid environment;
3. Please do not open the back cover of the main speaker in case of getting an electric shock or breaking the warranty regulations;
4. Please turn off the power switch and release the plugs if you probably do not use it within a long period.
5. If the USB isn’t play in the first time, please turn off the power, wait one minute and restart it, then it becomes normal

INCLUDED

• Main speaker 1 pc
• Auxiliary speaker 1 pcs
• User manual 1 pc

THE SKETCH MAP

Bluetooth/USB Port Speaker

BLUETOOTH OPERATING INSTRUCTIONS

1. Firstly,change the input signal to “BT”.
2. Secondly, Change the mobile or other BT function player into BT mode.then scan equipment, named” ME10″ and connect it.
3. When playing BT music,you can through the panel button and control cell phone BT music last song/play/pause/the next song
4. When playing mobile phone BT music, the external telephone access.speaker immediately be mute and at the same time to phone answer mode, in order to better protect the privacy of mobile phone users.
5. When you change the other mobile phone to play BT music, press PLAY /PAUSE,button for 2 seconds Disconnect from previous phone.It memorys the last connected player.

1. INPUT
   pressing the INPUT key,you could convert the input mode between the AUX/USB/BT

2. PREV
   (1 ).When playing USB/BT,press this button once to previous song.
   (2).Under each function, press and hold this key for a long time to reduce the total volume

3. PLAV /PAUSE
   (1 ).When playing USB/BT,press this button once to start playback & pause.
   (2).When playing BT, press this button Short press to start playback & pause.Long press to disconnect or reconnect Bluetooth pairing

4. NEXT
   (1 ).When playing USB/BT,press this button once to next song.
   (2).Under each function, press and hold this key for a long time to increase the total volume

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1 ) This device may not cause harmful interference.
   (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a class B digital device.pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   This equipment generates uses and can radiate radio frequence energy and.if not installed and used in accordance with the instructions.may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

Documents / Resources

| INSMART ME10 2.0 CH Multimedia Speaker [pdf] User Manual
ME10, 2AS7O-ME10, 2AS7OME10, ME10 2.0 CH Multimedia Speaker, ME10, 2.0 CH Multimedia Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>