FABATO E&7E1093 Large Hanging TV Cabinet LED Light Instructions
- June 17, 2024
- FABATO
Table of Contents
FABATO E&7E1093 Large Hanging TV Cabinet LED Light
Product Information
- The Cam Lock Fastening System is a versatile and efficient system designed to assist in the assembly process of various furniture pieces.
- It includes a set of parts with specific measurements and screws for secure fastening.
Specifications
- Part 1: 130028015mm
- Part 2: 28020015mm
- Part 3: 48312015mm
- Part 4: 28012015mm (2 pieces)
- Part 5: 50028015mm
- Part 6: 28012015mm
- Part 7: 50028015mm
- Part 8: 28012015mm
- Part 9: 28020015mm
Product Usage Instructions
- Assembly Instructions 1
- Step 1: Note the hole positions of part 1 and part 2.
- Step 2: Connect part 1 to part 2 using C screws and tighten securely.
- Assembly Instructions 2
- Step 1: Install and tighten A screws into the holes of part 2 and part 4.
- Step 2: Install B nuts into the holes of part 3.
- Step 3: Connect parts 2, 3, and 4 as shown and tighten B nuts.
- Frequently Asked Questions (FAQ)
- Q: Why was an extra screw provided?
- A: The extra screw is provided as a spare to ensure successful assembly. It is always recommended to have spare parts during the assembly process in case of loss or damage to any components.
Important
- We recommend two people to assemble the product easier and faster.
- Please DO NOT tighten the screws deeply during assembling avoiding that the metal frame can be bent and the plank will crack.
- We recommend that all screws should not be tightened over during assembling to make it easy to adjust. When it is adjusted to the proper station, all screws should be tightened.
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process
Services
- Thank you for choosing our products. If you have any problem with assembling or products.
- Please contact us at [email protected].
- We will do everything we can to solve all the problems for you.
- Note: Two people are recommended to assemble, which will greatly improve your assembling efficiency.
- FABATO[email protected].
Exploded Drawing
Parts
The EXTRA ONE SCREW was provided to make sure your assembling.
Assembly Instructions
TIPS
- The expansion screws are for the concrete base.
- The ordinary screws are for wooden bases.
GENERAL GUIDELINES
- Please read the following instructions carefully and use the product accordingly.
- Please keep this instruction and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps.
- Please contact us when further information and help are needed.
NOTES
- The product is intended for normal use only. The seller does not assume any responsibility or liability for any damage caused by incorrect assembly or improper use.
- Keep away from exposure and heat sources. Place it in a dry area to avoid peeling or fading.
- Please check if there is any welding spatter or debris when you receive the product. If there are defective or missing parts after unpacking, please contact us immediately.
- Use a soft cloth and neutral detergent to wipe it clean, then wipe dry. Do not use an abrasive agent to wipe theproduct.
WARNINGS
- During assembly, keep small parts out of the reach of children. It may be fatal if swallowed or inhaled.
- To avoid the potential danger of suffocation, keep all parts and packaging (films, plastic bags foam, etc.) away from babies and children.
- Keep away from sharp or corrosive items to avoid potential product damage or bodily injury
- If you have any problem with assembling or products, please contact us at [email protected].
Thank you for choosing our products, please assemble and use them following the instructions.
Read User Manual Online (PDF format)
Loading......