tp-link BE22000 Whole Home Mesh Wi-Fi 7 System User Guide

tp-link BE22000 Whole Home Mesh Wi-Fi 7 System

Product Information

• Specifications
  • Model: Deco BE85
  • Connectivity: 10 Gbps
  • Ports: 2x 2.5 Gbps WAN/LAN, 1x 10 Gbps WAN/LAN, 1x 10 Gbps RJ45/SFP+ Combo, 1x USB 3.0
  • LED Indicator Colors: Yellow (resetting), Blue (ready for setup), Green (upgrading firmware), Red (issue)

Product Usage Instructions

• Appearance and LED Indicator
  • Each Deco unit has an LED indicator that changes colour based on its status:
  • Pulse Yellow: Deco is resetting
  • Solid Yellow: Deco is starting up
  • Pulse Blue: Deco is ready for setup
  • Solid Blue: Deco is setting up
  • Pulse Green: Deco is upgrading the firmware
  • Solid Green: Deco is set up and connected
  • Pulse Red: Satellite Deco is disconnected from the main Deco
  • Solid Red: Deco has an issue
  • WPS Button
  • The WPS button on the Deco unit can be used to start the WPS process for quick device connection.
  • 10 Gbps Ports
  • The Deco BE85 features 10 Gbps WAN/LAN ports for connecting to your modem, Ethernet outlet, or other internet services.
  • 10 Gbps RJ45/SFP+ Combo Port
  • Use the Combo pair port which includes an Ethernet port and an SFP+ port. Only one port in the pair can be used at a time.
• Frequently Asked Questions (FAQ)
  • Q: What do the different LED indicator colours on Deco BE85 signify?
  • A: The LED colours indicate various states of the Deco unit, such as resetting, starting up, ready for setup, upgrading firmware, set up and connected, satellite disconnection, or an issue.
  • Q: How can I connect my client device using the WPS button on Deco BE85?
  • A: To connect your client device using WPS, press the WPS button on Deco and then immediately press the WPS button on your client device to initiate the connection process.
  • Q: Can both ports in the 10 Gbps RJ45/SFP+ Combo be used simultaneously?
  • A: No, only one port in the Combo pair can be utilized at a time on the Deco BE85.

About This Guide

This guide provides a brief introduction to the BE22000 Whole Home Mesh Wi-Fi 7 System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.

Conventions

In this guide, the following conventions are used:

redirect to a website or a specific section.

Teal

| Key information appears in teal, including management page text such as menus, items, buttons and so on.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

More Info

• Specific product information can be found on the product page at https://www.tp-link.com.
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com.
• Our Technical Support contact information can be found at the Help Center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support.

Speed/Coverage/Device Quantity Disclaimer

• Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications.
• Actual wireless data throughput wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

MU-MIMO Disclaimer

• The use of MU-MIMO requires clients to also support MU-MIMO.

IoT Compatibility Disclaimer

• IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.

Seamless Roaming Disclaimer

• Clients need to support 802.11k/v/r and may require additional set-up. Performance may vary depending on the client device.

HomeShield Disclaimer

• HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield. for more information.

Appearance

Each Deco has an LED that changes colour according to its status, a WPS button, two 2.5 Gbps WAN/LAN ports, a 10 Gbps WAN/LAN port, a 10 Gbps RJ45/SFP+ WAN/LAN Combo port, a USB 3.0 port, a power slot, and a Reset button.

See the explanation below:

Tip: The product label can be found at the bottom of the product.

Set Up Your Deco

First, let’s start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup.

1. Get the Deco app
   • Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet.
2. Log in or sign up with TP-Link ID
   • Open the app and log in with your TP-Link ID. If you don’t have a TP-Link ID, create one first.
   • Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password.
3. Select your Deco model
   • Search for and select your Deco model.
   • If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network.
4. Plug in your Deco
   • Power off your modem. Connect your Deco to the modem and power them both on.
   • If you don’t have a modem, connect your Deco directly to the Ethernet outlet.
5. Wait until Deco’s LED pulses blue
   • Wait until your Deco’s LED pulses blue, and then your phone/tablet will connect to the Deco’s default Wi-Fi automatically.
6. Specify your Deco’s location
   • Select or custom a location for your Deco. The location will be used as the name of your Deco.
7. Connect your Deco to the internet
   • Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.
8. Create your Wi-Fi network
   • Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.
9. Create your MLO network
   • Set a network name and a password. The MLO network enables Wi-Fi 7 clients to connect to multiple bands simultaneously.
10. Keep your Deco up-to-date
    • Set auto update time. This allows your Deco to automatically update to the latest firmware which provides a better network experience.
11. Connect to your Wi-Fi network
    • Connect your phone/tablet to the Deco’s Wi-Fi.
12. Use Deco’s Combo Pair
    • The Combo pair includes an Ethernet port and an SFP+ port. Only one port in the pair can be used at a time.
13. Setup complete
    • Your Deco network is now up. You can connect your devices to the Deco network. Plug in the other included Decos, and they will automatically join the network within 2 minutes.
14. Add more Decos
    • Plug in the other included Decos, and they will automatically join the network within 2 minutes.

Troubleshooting

Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco.
If problems still exist, contact us: https://www.tp-link.com/support.

• Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn’t find Deco”?
  • Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM.
• Q2. What should I do if I fail to configure the satellite Deco and get stuck on “We couldn’t find another Deco”?
  • Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4.
• Q3. What should I do if I fail to configure the main Deco and get stuck on “Testing Internet Connection”?
  • Refer to the guide https://www.tp-link.com/support/faq/2239/.
  • Refer to the video https://youtu.be/OSUrGdWH-i0.
• Q4. What should I do if my wireless devices cannot connect to Deco?
  • Refer to the guide https://www.tp-link.com/support/faq/2718/.
• Q5. What should I do if Deco suddenly loses internet access?
  • Refer to the guide https://www.tp-link.com/support/faq/2428/.
• Q6. How can I find a suitable spot for my Deco?
  • Refer to the guide https://www.tp-link.com//support/faq/1446/.
• Q7. What can I do if the Deco app isn’t working properly?
  • Refer to the guide https://www.tp-link.com/support/faq/1456/.

Authentication

FCC Compliance Information Statement

• Product Name: BE22000 Whole Home Mesh Wi-Fi 7 System
• Model Number: Deco BE85

Responsible party: TP-Link USA Corporation

• Address: 10 Mauchly, Irvine, CA 92618
• Website: http://www.tp-link.com/us/.
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: [email protected].

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
• To comply with FCC RF exposure compliance requirements, this grant applies to only Mobile Configurations.
• The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
• FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet.
• Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
• We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15.
• There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

FCC Compliance Information Statement

• Product Name: I.T.E POWER SUPPLY
• Model Number: T150500-2-DT / S065PQ1200500
• Responsible party: TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: http://www.tp-link.com/us/.
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: [email protected].

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made to the equipment and the equipment is properly maintained and operated.

Issue Date: 2023-04-13

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution:

• The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
• DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.
• ISED regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet.
• Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Radiation Exposure Statement:

• This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

ISED regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

• Industry Canada Statement
  • CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies that are provided by the manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Operating Temperature: 0°C~40°C (32°F~104°F)

This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the Symbols

Explanation of the symbols on the product label

1910013376 REV2.0.0 © 2023 TP-Link

References

• Link: Simple, secure one-click payments
• HomeShield | TP-Link Australia
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link Community
• WiFi Networking Equipment for Home & Business | TP-Link
• How can I find a suitable spot for my Deco? | TP-Link Australia
• Encountering an Error When Adding a Deco | TP-Link
• What can I do if the Deco app isn't working properly | TP-Link
• Main Deco Failed to Complete Setup | TP-Link
• The internet connection is unstable or suddenly stops working when connected to the Deco network? | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>