ENERLITES 961501-C-GFCI Brass Round Pop up Floor Box with TR GFCI Outlet Instruction Manual
- June 17, 2024
- ENERLITES
Table of Contents
ENERLITES 961501-C-GFCI Brass Round Pop-up Floor Box with TR GFCI Outlet
Specifications:
- Model: 961501-C-GFCI and 961501-S-GFCI
- Type: One Gang Pop-up Floor Box Assembly
- Receptacle: 20A GFCI Tamper Resistant Duplex
- Wire Compatibility: 10-12 AWG Stranded or Solid Copper
- Dimensions: 4″ x 4″ x 3″ (101.6mm x 101.6mm x 76.2mm)
Description/Features
- This One Gang Pop-up Floor Box Assembly comes with a 20A GFCI Tamper Resistant Duplex Receptacle.
- It is designed for easy installation and is compliant with the National Electric Code and local regulations.
Installation Instructions
- WARNING: Turn off the power at the circuit breaker before installing the Floor Box.
- Read and understand the instructions before installation.
- Ensure there is sufficient depth & space below the subfloor for installation.
- Step 1: For carpeted floors, cut out a section of carpet smaller than the size of the cover.
Wiring Directions
- Insert the HOT wire into the LINE terminal and tighten the screw.
- Insert the NEUTRAL wire into the NEUTRAL terminal and tighten the screw.
- Insert the GROUND wire into the GREEN terminal and tighten the screw.
Warranty Information This product comes with a standard warranty. Please refer to the warranty documentation for details. FAQ Q: Can this floor box be used outdoors?
- A: This floor box is designed for indoor use only.
Q: Is this product compatible with aluminum wiring?
- A: It is recommended to use copper wire only, as stated in the instructions.
Q: What is the depth requirement for installation?
- A: Ensure there is sufficient depth below the subfloor as mentioned in the instructions.
SPECIFICATIONS
Cover Material
- 961501. …………………………………………………………………………..Brass(C) or Nickel-Plated Brass(S)
- Receptacle Rating.. …………………………………………………………………………………………20A 125VAC
- Box Material. …………………………………………………………………………………………….Galvanized Steel
- Knockout size. ………………………………………………………………………………………………..1/2″ and 3/4″
- Adjustable Height.. ………………………………………………………………………………………..up to 1″ depth
DESCRIPTION/ FEATURES
- Included is a One gang pop-up floor box with a 20 amp GFCI tamper-resistant duplex receptacle.
- Compact and stylish design with adjustable height function metal box with the choice of Brass(C) or Nickel-Plated Brass(S).
- Corrosion-resistant hardware ensures a long life span and reliable performance.
- Easy access to power when you need it. Snap the cover closed when not in use.
- Used for carpet and wood floors. Also great for countertop applications.
WARNING Turn the POWER OFF at the circuit breaker before installing the Floor Box
- Read and understand these instructions before installing. This device is intended for installation under the National Electric Code and local regulations.
- It is recommended that a qualified electrician perform this installation.
- Make sure to turn off the circuit breaker or fuse(s) and make sure the power is off before wiring the device. Use copper wire only, or equivalent.
- NOTES: 10-12 AWG Stranded or Solid Copper wire is recommended.
FLOOR BOX INSTALLATION
Before Installation:
- Ensure there is sufficient depth & space below the subfloor.
Step 1 For carpeted floors:
- Cut out a section of carpet smaller than the size of the cover.
For wood sub-floors and finished hardwood floors:
- Tape the template on the area you want to place the floor box.
- Use a knife to cut the outline of the box. Start with the ears and move inwards.
- Following the outline, cut the box shape without the ears completely through the subfloor or hardwood floor.
- Following the outline, cut 3/8″ deep into the subfloor or hardwood for the mounting ears.
- Using a router is recommended
Step 2
- Remove knockouts and secure the box onto the floor. Pull the wires through the opening of the floor and the knockout and connect the wires based on the wiring diagram.
- Use the proper connector/ clamp at the knockouts to secure the wires and avoid accidental wire stripping.
- Secure the box to the opening using wood screws.
WIRING DIRECTIONS
- Insert the HOT wire into the LINE termimal and tighten the screw.
- Insert the NEUTRAL wire into the NEUTRAL terminal and tighten the screw.
- Insert the GROUND wire into the GREEN terminal and tighten the screw.
WARRANTY INFORMATION
- This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase.
- An original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim.
- ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary.
- This warranty is non-transferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation.
- To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end-user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement, or refund. Repair, replacement, or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
- © 2019 Enerlites Inc. CA, U.S.A.
- WWW.ENERLITES.COM
- 0202190133-02
- REV 20230802
Documents / Resources
|
ENERLITES 961501-C-GFCI Brass Round Pop up Floor Box with TR GFCI
Outlet
[pdf] Instruction Manual
961501-C-GFCI Brass Round Pop up Floor Box with TR GFCI Outlet, 961501-C-GFCI,
Brass Round Pop up Floor Box with TR GFCI Outlet, Round Pop up Floor Box with
TR GFCI Outlet, Floor Box with TR GFCI Outlet, Box with TR GFCI Outlet, TR
GFCI Outlet, GFCI Outlet
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>