The Home Depot D-UR-245PBB 5 Tier Steel Storage Shelves Instruction Manual
- June 17, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot D-UR-245PBB 5 Tier Steel Storage Shelves
Dear Customer
- Thanks a million for purchasing this garage shelves from us. Your support is highly appreciated .
- Our goal is to build mutually beneficial cooperation & relationships between customers and aims to be a reliable, responsible and recommendable brand.
- We sincerely hope this garage shelves could meet your expectations and you would consider us again for your future needs. If there is anything we could help, please contact us and we are always here to help. We would greatly appreciate your support.
- When you received the package, please kindly double check your package and accessories to see if there is any problem. Should you have any questions, please do not hesitate to contact us at any time.
- Email:molyhom.service@outlook.com
- We will spare no efforts to help you as always. We will replay each email or call within 24 hours and all of our endeavors are made for customers. Your 1 00% satisfaction is our unchangeable goals forever!
Kindest regards,
Customer Service Team
Before installation, please check the accessories according to the part list. If there is any part missing or defective, please contact us immediately to get replacement part.
Email:molyhom.service@outlook.com
Part List
If you have any questions, please Contact us,we have installation video for reference.
installation
Note : Please wear gloves before installation
-
Step 1
Inset rubber foot pad (Part B) into 4 vertical bars (part 1 # )as below. -
Step 2
Install short cross bar(2#) and long cross bar (3#)on vertical bars (1 #)with hammer as below. -
Step 3
Connect another vertical bar(1 #) with the finished part in the previous step by the cross bar(3#). -
Step 4
Refer to step 2 and step 3, connect the other two vertical bars in turn through the crossbar, as shown in the figure. -
Step 5
Install 2 short cross bars(2#) and 2 long cross bars(3#) on the finished part, as shown in the figure.
-
Step 6
Use the rubber hammer to knock down the 4 connectors (Part A). -
Step 7
Connect the remaining four vertical bars (1 #) and the finished frame by 4 connectors (Part A) and the cross bars as below. -
Step 8
Assembled the remaining cross bars as previous steps, as shown in the figure.
- Step 9
Place all the metal boards(Part C) on the frame,install wheels and fences as shown in the figure.
Notice
-
During installation, you can adjust the heights of metal boards according to your storage needs.
-
It can be divided into two different shelves as below.
-
Do not load more than 400Ibs per shelf.
-
For longer lifespan, please use this rack in a cool and dry place.
-
For your safety, do not stack too high on the top shelf.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>