DECIMATOR Version 2.0 Simultaneously Scales SDI to Both HDMI Instruction Manual
- June 17, 2024
- DECIMATOR
Table of Contents
DECIMATOR Version 2.0 Simultaneously Scales SDI to Both HDMI Instruction
Manual
INSTRUCTION
The latest USB Control Software and Specifications for this product can be
downloaded from:
www.decimator.com/specs
STATUS
| LED Status
---|---
LED| Description| Off| Green| Red| Orange
1| Power| None| Good| Updating|
2| Format Detected| None| SD| HD| 3G
DIP SWITCHES
| SWITCH | OFF | ON | |
|---|---|---|---|
| 1 | Down-converted Output | NTSC | PAL |
| 2 | NTSC Pedestal | OFF | ON |
| 3 | Down-converted Output Aspect Type | Letterbox for 16:9 Full Screen for | |
| 4:3 | CROP to 4:3 | ||
| 4 | Down-converted Output Aspect | 16:9 | 4:3 |
| SW 5 | SW 6 | SW 7 | Group |
| 9** | SW 10 | HDMI Output | |
| --- | --- | --- | --- |
| Off | Off | Off | 1 |
4:4:4, Noaudio is passed
Off| Off| On| 1| 2| Off| Off| On| HDMI RGB
4:4:4, 2Audio channels passed
Off| On| Off| 2| 1| Off| On| Off| HDMI YCbCr
4:4:4, 2Audio channels passed
Off| On| On| 2| 2| Off| On| On| HDMI YCbCr
4:2:2, 2Audio channels passed
On| Off| Off| 3| 1| On| Off| Off| HDMI RGB
4:4:4, 8Audio channels passed
On| Off| On| 3| 2| On| Off| On| HDMI YCbCr
4:4:4, 8Audio channels passed
On| On| Off| 4| 1| On| On| Off| HDMI YCbCr
4:2:2, 8Audio channels passed
On| On| On| 4| 2| On| On| On| DVI RGB 4:4:4,
Noaudio is passed
MOUNTING BRACKET
The Red Metal Mounting Bracket is included to assist you in mounting the DECIMATOR 2 unit to the back of racks and monitors.
DIRECTIONS
Line up the holes on the Mounting Plate with the threaded slots found on the back, top and bottom, of the DECIMATOR 2 unit. Attach the Mounting Plate as shown below.
SERVICE WARRANTY
Decimator Design warrants that this product will be free from defects in materials and workmanship for a period of 36 months from the date of purchase. If this product proves to be defective within this warranty period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and labour, or will provide a replacement product in exchange for the defective product.
In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service.
The Customer shall be responsible for packaging and shipping the defective product to a designated service centre nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the Decimator Design service centre is located. The Customer shall be responsible for paying all shipping charges, insurance, duties, taxes, and any other charges for products returned to any other location.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care.
Decimator Design shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than Decimator Design representatives to install, repair or service the product, b) to repair damage resulting from improper use or connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non-Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time of difficulty of servicing the product.
Copyright © 2013-2023
Decimator Design Pty Ltd, Sydney Australia
www.decimator.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>