DECIMATOR DESIGN MD-QUAD 4 Channel Multi Viewer Quad Split Instructions

DECIMATOR DESIGN MD-QUAD 4 Channel Multi Viewer Quad Split

IMPORTANT INFORMATION

Please note: MD-QUAD 3 hardware has serial numbers starting with MQC.

The latest USB Control Software and Specifications for this product can be downloaded at: www.decimator.com

Use the rotary to select the menu and press the button to toggle the setting.

When the settings are changed the Power LED will change to Red and change back to Green when they are saved.

Defaults are highlighted.

For all Menu Subsets when Rotary = 0. Input Status (Button is disabled)

| LED Status
---|---
LED| Description| Off| Green| Red| Orange
1| Input 1 Format Detect| None| SD| HD| 3G
2| Input 2 Format Detect| None| SD| HD| 3G
3| Input 3 Format Detect| None| SD| HD| 3G
4| Input 4 Format Detect| None| SD| HD| 3G

For all Menu Subsets when Rotary = 1. Menu Subset

Menu Subset = 0 / Rotary = 2. HDMI Output Type

Menu Subset = 0 / Rotary = 3. Output Select

Menu Subset = 0 / Rotary = 4. Multi-View Audio Source

Menu Subset = 0 / Rotary = 5. Multi-View / Test-Pattern Mode Output Format

Menu Subset = 0 / Rotary = 6. Multi-View Windows

Menu Subset = 0 / Rotary = 7. Multi-View Layout

Menu Subset = 0 / Rotary = 8. Select Input/s to Configure

LED 1| LED 2| LED 3| LED 4| Selected Input to configure
---|---|---|---|---
Off| Off| Off| Off| All inputs
Green| Off| Off| Off| Video Source 1
Off| Green| Off| Off| Video Source 2
Off| Off| Green| Off| Video Source 3
Off| Off| Off| Green| Video Source 4

Menu Subset = 0 / Rotary = 9. UMD Enable for Selected Input/s

| LED Status
---|---
LED| Description| Off| Green
1| UMD Enable| Off| On

LED 2, 3 and 4 are off.

Menu Subset = 0 / Rotary = A. Audio Meter Enable for Selected Input/s

Menu Subset = 0 / Rotary = B. Audio Bar Scale

Menu Subset = 0 / Rotary = C. Audio Test Signals

Broken Tone, Pair 4 = 500Hz Broken Tone
Off| Off| Green| Green| 1kHz Tone on Left for Pair 1, 2, 3 & 41kHz Broken Tone on Right for Pair 1, 2, 3 & 4

Menu Subset = 0 / Rotary = D. Test Pattern

LED 2, 3 and 4 are off.

For all Menu Subsets when Rotary = E.
Button 1 will reset all settings to their defaults.

Menu Subset = 1 / Rotary = 2. Audio Meter Style

Menu Subset = 1 / Rotary = 3. Audio Meter Reference Level

| LED Status
---|---
LED| Description| Off| Green| Red
1| Reference Level| -20dBFS| -18dBFS| -15dBFS

LED 2, 3 and 4 are off.

Menu Subset = 1 / Rotary = 4. On Screen Input Format Enable

| LED Status
---|---
LED| Description| Off| Green| Red
1| On Screen Format| Off| On for 5 seconds| Always on

LED 2, 3 and 4 are off.

Menu Subset = 1 / Rotary = 5. Multi-View Output Reference

| LED Status
---|---
LED| Description| Off| Green
1| Multi-View Output Reference| Free-run| Video Source 1

LED 2, 3 and 4 are off.

Menu Subset = 1 / MENU = 6. GPI Configuration

| LED Status
---|---
LED| Description| Off| Green
1| GPI| Configuration 1| Configuration 2

LED 2, 3 and 4 are off.

Menu Subset = 1 / MENU = 7. 3G Output Level

| LED Status
---|---
LED| Description| Off| Green
1| 3G Output Level| A| B

LED 2, 3 and 4 are off.

Menu Subset = 1 / MENU = 8, 9, A, B, C, D & F. Reserved for future use

GPI (General Purpose Inputs)

Configuration 0 (Tallies)

1, 2, 3 and 4.
8| GROUND| Use as reference ground.

Configuration 1

SERVICE WARRANTY

Decimator Design warrants that this product will be free from defects in materials and workmanship for a period of 36 months from the date of purchase. If this product proves to be defective within this warranty period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and labour, or will provide a replacement product in exchange for the defective product.

In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service. The Customer shall be responsible for packaging and shipping the defective product to a designated service centre nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the Decimator Design service centre is located. The Customer shall be responsible for paying all shipping charges, insurance, duties, taxes, and any other charges for products returned to any other location.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. Decimator Design shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than Decimator Design representatives to install, repair or service the product, b) to repair damage resulting from improper use or connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time of difficulty of servicing the product.

MD-QUAD Hardware Manual for Firmware Version 2.0 Copyright © 2014 Decimator Design Pty Ltd, Sydney, Australia E&OE

References

• Decimator Design

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>