JBC T260-A Pick & Place Handle Instruction Manual
- June 5, 2024
- JBC
Table of Contents
**
JBC T260-A Pick & Place Handle 
**
Packing List
The following items are included:
Pick & Place Handle ……. 1 unit
CU260 Cups Set …………. 1 unit Ref. 0940163
- 4.3 mm – 0940112 (x2)
- 7 mm – 0940111 (x2)
- 10 mm – 0940110 (x2)
Manual …………………………. 1 unit Ref. 0028986
NS260
Straight Needles Set ………1 unit Ref. 0901546
- 0.7 mm – 0901512 (x2) black
- 0.9 mm – 0901520 (x2) yellow
- 1.2 mm – 0901538 (x2) pink
NB260
Bent Needles Set ………… 1 unit Ref. 0861660
- 0.8 mm – 0861540 (x2) green
- 0.9 mm – 0861560 (x2) yellow
- 1.2 mm – 0861580 (x2) pink
Connections
Choose the needle that best fits the component and the suction cup if needed. Connected the tool to the station suction plug.
Working
For a correct suction process insert the needle in the cup as shown in the picture. Make sure the needle does not protrude from the cup.
Suction & Release 
Once the suction is activated, cover the pen
hole with your finger
- and lift off the component. Lift your finger
- from the pinhole to release the component.
Specifications
T260
Pick & Place Handle
Ref.: T260-A
- Total Net Weight: 21 g / 0.046 lb
- Package Dimensions/Weight:(L x W x H) 240 x 115 x 43 mm / 171 g
- Complies with CE standards. ESD safe. 9.45 x 4.53 x 1.69 in / 0.377 lb
Warranty
JBC’s 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. The warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>