Pioneer VSX-LX505 9.2 Channel Network AV Receiver Installation Guide
- June 17, 2024
- Pioneer
Table of Contents
Pioneer VSX-LX505 9.2 Channel Network AV Receiver
Important Information
This document uses a 7.1 channel system as an example when describing use. Refer to the online instruction manual when using other than a 7.1 channel system. There are also descriptions for using the multi-zone feature and other detailed operating instructions.
https://jp.pioneer-audiovisual.com/manual/ vsxlx505/top.pdf
Package Contains
Dimension
Info
STEP 1
Setup
This icon means the important setting. Make sure to confirm the setting at “Initial Setup” (STEP 3).
Assembly
Connectivity
Connect speakers with 4 Ω to 16 Ω impedance. Twist the ends of the speaker cable wires tightly.
STEP 2
Cable Connection
DAB European models FM Australian and Asian models AM Australian and Asian models
STEP 3
Switching On Off
Switch the input on the TV to that assigned to the unit.
To redo the initial setup
“System Setup”
“Miscellaneous”
“Initial Setup”
Info
Troubleshooting
Try restarting the unit. Switch this unit to standby, then do A.
If the problem is not fixed, try the following:
- Unplugging the power cord and HDMI cables then replugging them in again
- Initializing the settings (do B while this unit is ON)
- Updating the firmware
“Pioneer” is a trademarks of Pioneer Corporation, and are used under license.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>