EPSON TM-P80II Series Mobile Printer User Guide

EPSON TM-P80II Series Mobile Printer

TM-P20II / TM-P80II Series

Notices

Standards and Approvals
The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson® power supplies.)
North America: FCC Class B, CAN ICES-3 (B)/NMB-3 (B)

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC/ISED Compliance Statement
FCC CAUTION (Bluetooth® Model)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules.

FCC CAUTION (Wi-Fi® Model)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.
TM-P20II (M381A)/TM-P80II (M382A/M382C) have been tested and found to comply with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules.

Innovation, Science and Economic Development Canada (ISED) Notices
The device for operation in the band 5150–5350 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal

Computers:
We: Epson America, Inc.
Located at: 3131 Katella Ave., Los Alamitos, CA 90720
Telephone: 562-981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by
47CFR § 2.906. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

• Trade Name: Epson
• Type of Product: Thermal Printer
• Model : M381A/M381B
• Marketing Name: TM-P20II (Wi-Fi Model)/TM-P20II (Bluetooth Model)
• Model: M382A/M382C
• Marketing Name: TM-P80II (Wi-Fi Model)/TM-P80II (Wi-Fi Model with Auto-Cutter)
• Model: M382B/M382D
• Marketing Name: TM-P80II (Bluetooth Model)/TM-P80II (Bluetooth Model with Auto-Cutter)

Safety Information

Important Safety Information
The following information is intended to ensure safe and effective use of this product. Read this section carefully and store it in an accessible location.

Safety Precautions

DANGER: Handling the product improperly by ignoring this symbol can result in immediate danger of death or serious injury.

Do not use, charge, leave, or store the product at temperatures in excess of 140 °F (60 °C). Doing so may cause the product to leak, generate heat or smoke, rupture, or burst into flames.

WARNING: Handling the product improperly by ignoring this symbol can lead to death or serious injury.

Immediately remove the batteries from the printer or disconnect cables when a malfunction or other problem occurs, and contact Epson technical support as described on the Start Here sheet. Continued use of the product under the following conditions may lead to fire or electric shock.

• If the product emits smoke, a strange odor, or unusual noise.

• If water or other liquid spills into the product.

• If the product is too hot to touch or the case is deformed.
  Note the following points to avoid accidents such as fire, electric shock, or burns.

• Do not use this product where flammable fumes from gasoline, benzine, thinner, or other flammable liquids may be in the air.

• Do not use aerosol sprayers containing flammable gas inside or around the product.

• Do not cover the product with cloth, or place the product in locations subject to high levels of humidity or dust.

• Do not allow foreign or flammable objects to fall into the equipment.

• Do not touch the inside of the product except where mentioned in the manual.

• Be sure to use the specified batteries.

• Use a power supply that complies with the USB standard.

• Do not connect cables in ways other than those mentioned in the manual.

• Never disassemble or modify the product.

• In airplanes, follow the instructions from the airline. Turn off wireless devices during takeoff and landing according to the in-flight announcement.

• To avoid adversely affecting the operation of the following equipment and causing an accident, do not use the product: near medical equipment in a medical facility; within 9 inches (22 cm) of a cardiac pacemaker; near automatically controlled devices, such as automatic doors or fire alarms. Radio waves from this product may adversely affect these devices.

CAUTION: Handling the product improperly by ignoring this symbol can lead to injury and property damage.

Note the following points to avoid injury or malfunction.

• Do not place heavy objects on top of the product. Never stand or lean on the product.
• Do not press your hands or fingers against the cutter when removing printed paper or loading/replacing roll paper.
• Never attempt to repair the product yourself.

To ensure safety, remove the batteries from the printer before leaving it unused for an extended period.

The following symbols are used on this product to ensure safe and correct use of the product and to prevent injury, to you or others, or damage to property. Be sure to understand the meaning of the symbols before using the product.

| Warning / Caution| | Caution (hot surface)
---|---|---|---
| Prohibited| | Standby
| USB| |

Caution Labels
The caution labels on the product indicate the following precautions.
CAUTION: Do not touch the thermal head and the frame on its side because it can be very hot after printing.
CAUTION: Touching the manual cutter may cause injury.

EPSON is a registered trademark of Seiko Epson Corporation.
General Notice : Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.

Products can be used only in the countries and regions listed below.

TM-P20II/TM-P80II (Bluetooth)

TM-P20II/TM-P80II (Wi-Fi)

TM-P20II (011), TM-P80II (011/031/051)

TM-P20II (012), TM-P80II (012/032/052)

TM-P20II (013), TM-P80II (013/033/053)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>