LIVINOX LCH-ROSEDC-90BL Hood User Manual

LIVINOX LCH-ROSEDC-90BL Hood

Specifications

• Model: LCH-ROSEDC-90BL
• Intended Use: Household
• Ventilation Types: Ducted
• Speed Settings: Turbo, High, Mid, Low

Product Usage Instructions

Safety Instructions

• Ensure adequate ventilation in the room when using the range hood simultaneously with gas/fuel burning appliances.
• Provide sufficient air for proper exhausting of gases through the flue of fuel burning appliances.
• Do not use the appliance if you have reduced physical, sensory, or mental capabilities.
• Properly exhaust air outside and avoid venting exhaust air into enclosed spaces.

Installation

• Appliance must be installed or repaired by a qualified technician.
• Do not modify any part of the appliance yourself.
• Ensure good and permanent ventilation in the installation location.
• Maintain proper distance between the hood and the bench.
• Use correct electrical connectors and check voltage compatibility.

Instructions for Use

• To activate Turbo mode, press the Turbo button. The fan will run at booster speed (F4 on LED screen) for 3 minutes before switching to high speed automatically.
• To adjust fan speed:
  • Press + for low speed (F1), mid speed (F2), and high speed (F3).
  • Press – for high speed (F3), mid speed (F2), and low speed (F1).
• To stop the fan, press C fourth to enter non-working state.

FAQ

• Can I use this appliance for commercial purposes?
  No, this product is intended for household use only and should not be used for commercial applications.

• How do I ensure proper ventilation during operation?
  Ensure there is adequate ventilation in the room and follow the installation guidelines provided in the manual.

• What should I do if the indicator light does not turn on?
  Check the electrical connections and ensure the voltage in your area corresponds to the appliance requirements.

From the Manufacturer
Please read this user manual carefully before attempting to operate the appliance and keep it in a safe place for future reference.
This appliance and its packaging are produced by processes that minimize waste and respect the environment. Please help us to continue this effort to protect the environment by using the appliance efficiently and dispose of the packaging in a responsible manner.
FOR THE USER

Safety Instruction

Warning  
PLEASE READ THIS SECTION THOROUGHLY BEFORE ATTEMPTING TO OPERATE THE APPLIANCE

1. To ensure adequate ventilation in the room when the range hood is in use at the same time as gas/fuel burning cooking appliances (this is not applicable to appliances that only discharge the air back into the room).
2. There is a fire risk if cleaning is not carried out in accordance with the instructions.
3. To avoid using food products that produce flame under the range hood.
4. Do not “flambé“ food (is a cooking procedure in which alcohol is added to a hot pan to create a burst of flames) under the range hood.
5. Sufficient air is needed for proper exhausting of gases through flue (chimney) of fuel burning appliances.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory, mental capabilities, lack of experience and knowledge.
7. To reduce risk of fire and to properly exhaust air and to ensure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings, into attics and crawl spaces.

Installation

1. This appliance must be installed or repaired by a qualified technician only.
2. Do not modify any part of this appliance by yourself.
3. To ensure the location in which this appliance is installed has good and permanent ventilation.
4. In ducted mode, there must be one or more permanent air inlet. The air collected must not be discharged into a duct used to blow off smoke from other appliances fed with electricity.
5. The distance between the bench to the lower part of the hood must not be less than 300-350mm.
6. Use an electrical connector with earth that is correct for your location.
7. To check the voltage in your area correspond to the appliance as indicated on the rating label.
8. Do not connect the hood to a duct that carries combustion fumes (e.g. fireplace).

Intended For Household Use

1. This product is designed for household use only and should never be used for commercial applications.
2. After use, always ensure that all controls are in the “OFF” position.
3. When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch fire.

Cleaning, Maintenance & Service

• It is very important to clean and maintain the grease filters regularly (at least once monthly) to improve its efficiency in eliminating heat and contaminated air in the kitchen. Heavy oil deposits is a fire hazard.

• Hood surface should be cleaned with soft cloth and non-corrosive detergent.
  Important: Never attempt to repair this appliance by yourself. Always refer to qualified Service Technicians.

• For safety precaution, always purchase the original replacement parts.

• Always switch off the power and unplug the connection before conducting maintenance or cleaning.

Electrical Cord

1. To ensure the electrical cord is not exposed to heat, chemical or sharp objects.
2. If the electrical cord is damaged, it must be replaced by the manufacturer or its service agent or qualified electrician.

Dimension Diagrams

Instructions for use

• Press Turbo,The indicator blinks three times,its indicator light is on and the fan is at booster/highest speed (LED Screen shows “F4”). After running for 3 minutes, it will automatically switch to high speed state. Press again, the motor will stop working, the indicator light will be off, and the range hood will enter non-working state.
• Press +,Press + once,The indicator blinks three times, the fan is working at low speed (LED screen shows”F1”). Press C second ,The indicator blinks three times, the fan runs at mid speed (LED screen shows “F2”).
• Press C third,The indicator blinks three times ,the fan runs at high speed (LED Screen shows “F3”). Press C fourth,The indicator blinks three times ,The display shows the time,enter non-working state.
• Press -,Press – once,The indicator blinks three times, the fan is working at high speed (LED screen shows”F3”). Press C second ,The indicator blinks three times, the fan runs at mid speed (LED screen shows “F2”). Press C third,The indicator blinks three times ,the fan runs at low speed (LED Screen shows “F1”). Press C fourth,The indicator blinks three times ,The display shows the time,enter non-working state.
• Press Auto Clean,In non-working state, press Auto Clean for 3 seconds, oil removing function will operate for 10 minutes(The fan will automatically operate at high speed for 1 minute after the 10 minutes cleaning function. ). press Auto Clean for 3 seconds again,The indicator blinks three times, turn off oil removing function.
• Press , In non-working state, Press 3 seconds to set clock, the hour position on LED screen twinkles then you can use + and – to set hour. Press Settings once again, the minute position on LED screen twinkles then you can use + and – to set minute.
• Press , turn on power. Press it again, turn off power. Press,In non-working/ working state,Press once, The indicator blinks three times,turn on the light. Press again,The indicator blinks three times, turn off the light.

Cleaning & Maintenance

ALWAYS SWITCH OFF AND UNPLUG FIRST!

SURFACES:
Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance as this will cause irreparable damage.

ALUMINIUM NET:

• Wash in the dishwashers or soak the panels in a degreasing agent for an hour, then rinse off and dry before re-installing.
• For this appliance to function effectively, regular maintenance is a must.
• Clogged filters restrict airflow and may cause the motor to overheat.

Installation

1. Use suitable bolts to mount the appliance on a secure surface.
2. The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the range hood. When the range hood is located above a gas appliance, this distance should between 300-350mm. If the instructions for installation for the gas hob specify a greater distance, this has to be taken into consideration.
3. To obtain best performance, it is advisable to install in an air ventilated area.
4. Do not install the outlet of the exhaust duct in the wind direction, which can prevent the exhaust air from flowing backward.
5. Fasten the components on exhaust outlet with screws. To perform for smooth airflow, the exhaust duct should bend in L-shape till exhaust outlet

• **Complete components include as follow :

NOTE:** Fixing Screws bag should contain :

• Use a phillips screwdriver to loosen the two pieces of screws on the left and right side and remove chimneys as per below fig.：

• Install duct cover：
  Please remove the sponge tape and adhere it under the bottom of the duct cover. Remove the four screws (M4*16mm) from motor outlet, Fix the duct cover onto fan assembly as per below fig.

• Please connect the wires between fan assembly and chamber assembly as per below fig

• Fix the Fan Assembly & Chamber Assembly by using the 10 pcs M4x8mm screws to tighten it as per below fig.

• LED light plug must pull out from the hole to enable the connection to LED lamp.

• Install the Exhaust Duct: Fix the Exhaust Duct and duct cover tightly with 2 pcs ST2.912mm screws. Then fix 2pcs M410MM screws to each side of the body.
  Remarks: Do not screw too tight, keep about 5mm gap between the body and M4*10mm screw head as per below fig

• Install The Hook ：Measure a standard hanging height and pre-drill 3 holes by horizontal position on the wall, and drive the plastic expansion bolt into the holes. Use 3pcs ST4.8 screws to fasten the hook on wall firmly.

• Install the fan assembly into the chamber assembly and align the second holes with 2pcs M4 screws. Connect LED light plug into fan assembly

• 1st chimney and ducting cover bracket connection : Use a philips screw driver to fix the ducting cover bracket into the extra chimney with 2 PCS Screws M4*8 mm as below fig.：

• Install the cooker hood：Hang the complete set onto the hook firmly.

• 2nd Chimney installation：Measure a suitable height for 2nd Chimney and pre-drill with 2 screws holes by horizontal position on wall. Insert the plastic expansion bolt into the holes and tighten the ducting bracket by 2 pcs ST3.8*25mm screws. Pull up the 2nd chimney to fix on the bracket.

Safety Information

1. Electrical connection must be in accordance with the local standards and laws.
2. To ensure that the electrical supply in compliance with the appliance setting, otherwise, do not connect.
3. To ensure the power supply cord is free from any heat source or sharp objects.
4. The electrical connection of this appliance must be soundly earthed. In the event of electrical short circuit, grounding reduces the risk of electrical shock. If unsure, contact a qualified electrician.
5. Replacement of lamp must not exceed 20W.
6. LED lamp must not exceed 1.5W/7W.

Trouble shooting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>