VEVOR 10 Tier Commercial Bakery Racks with Brake Wheels User Manual
- June 17, 2024
- VEVOR
Table of Contents
VEVOR 10 Tier Commercial Bakery Racks with Brake Wheels
Introduction
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you’re actually saving half in comparison with the top major brands.
Thanks for purchasing one of our products.
Please read the assembly instructions carefully before the installation.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation four user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform again there are any technology or software updates on our product.
ASSEMBLY PRECAUTIONS
- Assemble needs to follow these instructions. Incorrect assembly can be hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities only apply to a properly and completely assembled product.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play wither approach this item.
- Use as intended only. Do not sit or stand on the product.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use on flat, level, and hard surfaces only. 5. Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The suddenload movement may briefly create an excess load, causing product failure.
PARTS LIST
NOTE: Part not shown to actual size.
| QTY | DESCRIPTION |
|---|---|
| 2 | Side Frames |
| 4 | Square Cross Bars |
| 4 | “U” Washers |
| 8 | Hex Bolts |
| 2 | Swivel Casters w/Brake |
| 2 | Swivel Caster w/o Brake |
| 4 | Plastic Foot Pad |
Please identify each part and check to ensure that all are accounted for.
ASSEMBLY STEPS
STEP 1
Lay a rack’s Side Frame on the floor and attach the Square CrossBars into the
holes. (Figure 1.1).
Attach the “U” Washers from underneath, insert the Hex Bolts through them,and into the cross bars. Do not fully tighten the bolts.(Figure 1.2)
STEP 2
Align and place the other Side Frame onto the end of the crossbars(Figure 2.1)
Insert the rest 4 Hex Bolts with the “U” Washers.
STEP 3
Insert the 4 Casters into bottom ends of the side frames. Make Sure The holes
in the casters line up with the holes in the frame(Figure 3.1)
Align and attach the Square Cross Bars between thesideframesatthe bottom.
Insert the Hex Bolts through the frame andintoendofthecross bars.
STEP 4
Lift and place the rack upright, check balance, and tighten all bolts to
complete the assembly.
The 10-layer bakery rack also has four plastic soles, which can be used as a fixed model.
The specific installation way is to install the shelf, do not install
wheels,directly install 4 plastic foot MATS can be.
Cleaning
For cleaning, wipe the surface with a damp (not wet) clothor wipedrywith a clean lint free cotton cloth.
CUSTOMER SUPPORT
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Support and E-Warranty Certificate
www.vevor.com/support
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>