VEVOR LPK928 Wooden High Chair for Babies and Toddlers User Manual
- June 17, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty Certificate
www.vevor.com/support
HIGH CHAIR FOR GROWING BABY
USER MANUAL
LPK928 Wooden High Chair for Babies and Toddlers
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Model: LPK928
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
PRODUCT PARAMETERS
| Model | Product Size(WxDxH） | Loading Capacity | material | Color |
|---|---|---|---|---|
| LPK928 | W18.2″ xD19″xH31.3″ | |||
| (463x485x795 mm) | 250 lbs |
(Max) (about
113KG)| Beechwood| primary color
ASSEMBLYPRECAUTIONS
- Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight and other product properties are only applicable to correctly and completely assembled products.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Please keep the product away from children while assembling.
- Use as intended only. Do not let children play or jump on the product.Do not stand on the item or use as a step ladder.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Tighten the lower screws every three months to prevent loosening of the legs.
- Do not exceed the listed weight capacity.
Prevent serious injury or death from falls or sliding out: Always keep
child in view while in high chair.-Always secure child in the restraint.
It is recommended that the high chair be used only by children capable
of sitting upright unassisted.
**** This product is suitable for children age: 6 months and older.
SAVE THESE INSTRUCTIONS
PARTS LIST
| No. | Name | Parts | Quantity |
|---|---|---|---|
| A | Left shelf | | 1 PCS
B| Right shelf| 
| 1 PCS
C| Sitting board| 
| 1 PCS
D| tray| 
| 1 PCS
E| Connect iron pipes| 
| 1
PCS
F| Back panel| 
| 2 PCS
G| Foot pedal| 
| 1 PCS
H| Connecting
rods| 
| 1 PCS
| Hex wrench| | 1 PCS
No.| Name| Parts| Quantiy
---|---|---|---
1| Short screws| | 4 PCS
2| Long screws| 
| 6 PCS
3| Block nuts| 
| 6 PCS
4| Round log pins| 
| 2PCS
5| safety belt| 
| 1 PCS
ASSEMBLY STEPS
STEP 1
Install the corresponding parts according to the connecting lines in the drawing. When installing, pay attention to the screws on one side not to tighten, reserve a gap to facilitate the next step of installation
STEP 2
As shown, insert the tray“C”, Sitting board“D”, and Foot pedal“G” according to the desired height, and tighten the screws on the other side
COMPLETION
Install the seat belt, done.
(Note: For the installation of seat belts, please refer to the page for
introduction)
Cleaning and Maintenance
- Use a soft, clean cloth that will not scratch the surface when dusting.
- Do not store wood products outdoors or in a humid environment when not in use
- Periodically tighten screws and bolts,as needed.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made in China
Support and E-Warranty Certificate
www.vevor.com/support