VEVOR 6601 Trimmer Rack User Manual
- June 17, 2024
- VEVOR
Table of Contents
VEVOR 6601 Trimmer Rack
Product Information
Specifications
- Model: 6601
- Mounting Type: Standing Mounted
- Maximum Load Capacity: Not specified
- Total Product Height: Not specified
Product Usage Instructions
Safety Instructions
- Always wear safety glasses when using power tools.
- Check under the trailer and/or fender for locations of brake lines and electrical wiring before drilling any holes.
- The hardware required to attach the rack is not included and must be supplied by the user.
- Prepare the tools required for installation by yourself.
Components
| No. | Picture | Name | Qty |
|---|---|---|---|
| 1 | – | Locking Pole- Up | 1 |
Assembly and Use
- Step 1: Assemble the Bracket using Bolts(M6*60).
- Step 2: Mount the rack to the trailer using Bolts(M1030) or (M1075) with Nuts.
Instructions for the Coded Lock
- To set your personal combination:
-
- Pull up the shackle to open the lock.
Maintenance
- Do not overload the rack.
- Check and tighten loose screws every two months.
- Repair any broken paint to prevent rust.
FAQ
Q: What is the maximum load capacity of the trimmer rack?
A: The maximum load capacity is not specified in the manual. It is
recommended to not overload the rack.
Technical Support and E-Warranty Certificate www.vevor.com/support
We continue to be committed to providing you tools with at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
- Always wear safety glasses when using power tools.
- Check under the trailer and/or fender for locations of brake lines and electrical wiring etc., before drilling any holes. Any damage to the trailer during installation is the installer’s sole responsibility.
- Due to the many different ways trailers are built, the hardware required to attach the rack is not included and must be supplied by the user.
- Prepare the tools required for the installation by yourself.
MODEL AND PARAMETERS
STRUCTURE DIAGRAM
- Locking Pole- Up
- Locking Pole- Down
- Compression Pole- Up
- Compression Pole- Down
COMPONENTS
ASSEMBLY AND USE
- Step 1: Assembly the Bracket.
- Step 2: Mounting to the trailer.
INSTRUCTIONS FOR THE CODED LOCK
The lock is opened at the original number 0-0-0, aligned with the indication line.(Even though dials may be positioned at different numbers.)
To set your personal combination, follow these steps:
-
Pull up the shackle to open the lock.
-
Rotate the shackle 90°counterclockwise and press all the way down.
( Note : Keep pressing until the password is changed.) -
Set your own combination by turning dials.
-
Turn the shackle back as normal. Then the setting is completed.
MAINTENANCE
- Do not overload.
- Please check and confirm whether the screws are loose every two months.
- If any part of the paint is broken, please repair the paint as soon as possible to prevent rust.
MADE IN CHINA
TechnicalSupport and E-Warranty Certificate www.vevor.com/support