LOCKLY PGD728F ZU Z-Wave Smart Lock User Manual

: June 17, 2024
: LOCKLY

Table of Contents

LOCKLY PGD728F ZU Z-Wave Smart Lock
Lockly Z-Wave Smart Lock
Product Features
Product Overview
FAQ
Product Features
PROGRAM RESET
Program Button
Important Notes
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LOCKLY PGD728F ZU Z-Wave Smart Lock

LOCKLY-PGD728F-ZU-Z-Wave-Smart-Lock

Lockly Z-Wave Smart Lock

Specifications

Model: PGD728F ZU | PGD728 ZU
Product Type: Z-Wave Smart Lock
For: Commercial use & professional installation
Website: www.LocklyPRO.com

Product Features

Patented Hack-Proof PIN Genie Keypad
Multiple Access Codes & Monitoring
Advanced 3D Fingerprint Recognition (only on PGD728F ZU)
Live Monitoring and Voice Control
Complete Privacy
Offline Access CodeTM (OAC)
Backup Keys and 9V Battery Socket

Product Overview

Exterior
The exterior of the lock features a keypad for entering access codes and a key slot for physical keys.

Interior
The interior panel allows you to configure settings, change batteries, and control various lock functions.

Understanding Your New Lock
Familiarize yourself with the different components of the lock and their functions.

FAQ

Q: How many fingerprints can be registered on the PGD728F ZU model?
A: The PGD728F ZU model allows up to 99 fingerprints to be registered.

Q: Can I still access my home if the lock’s battery runs out?
A: Yes, you can use physical backup keys or connect a 9V battery for emergency power backup to access the keypad.

Q: How can I reset the lock if needed?
A: You can reset the lock by following the instructions in the user manual under the “Reset Button” section.

USER MANUAL MANUEL D’UTILISATION
PGD728F ZU | PGD728 ZU
DEADBOLT 728F ZU DEADBOLT 728 ZU
Z-WAVE SMART LOCK
For commercial use & professional installation
www.LocklyPRO.com

*only available on 728F ZU

For additional support, visit http://LocklyPro.com/support or email help@Lockly.com

Product Features

Patented Hack-Proof PIN Genie Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different every time someone uses the keypad, making it hard for prying eyes to guess the correct code.
Built in Z-Wave® module Integrate with your Z-Wave smart home system, supports 2GIG GC2E and IQpanel QS9207 Z-Wave controller to lock and unlock from anywhere.
Multiple Access Codes & Monitoring Store up to 33 Access Codes for family, friends and guests, as well as monitor entry and exit records.
Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints – preventing lifted prints from being used. ( only on PGD728F ZU )
Live Monitoring and Voice Control Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goeswith the Secure Link Wi-Fi Hub. (Requires Secure Link Wi-Fi hub, sold separately PGH230)
Complete Privacy The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from the inside panel. The owner can prevent others trying to input the passcode from the outside and entering the home.
Offline Access CodeTM (OAC) The Offline Access CodeTM can allow owners to issue access codes, set the allowed access duration, all without Lock ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web.
Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the keypad in case your smart lock runs out of battery.

SECTION 1.1

1

2.1 Product Overview – Exterior

ENG

Key Hole Cover Key Hole
2

OK Button Welcome/Safe Mode Fingerprint Sensor Battery Indicator Indicator
Reboot 9V Battery Socket
SECTION 2.1

ENG

2.2 Product Overview – Interior
Battery Cover
Display Keypad Switch Thumbturn

Battery Compartment
( Operated by 4 x AA Batteries)
Reset Button Program Button Beep Alert

SECTION 2.2

3

ENG

2.3 Understanding Your New Lock
After the installation of your new Lockly Guard, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints, and how to configure your OAC (Offline Access CodeTM).
For any questions you can always visit http://LocklyPro.com/support for assistance.
Don’t forget that Lockly Guard works best with our iOS and Android app. Please download the app by visiting the link below.

Scan or visit LocklyPro.com/app

Lockly Guard supports working in both Z-Wave mode and LocklyPro App mode. Z-Wave controller takes precedence over Lockly App. If you set the clock and time zone or auto-locking through Z-Wave, the door lock will prioritize the Z-Wave controller settings.

4

SECTION 2.3

ENG

2.4 Reset Button

If you need to reset, you must have your Activation Code. The Activation Code can be found on the Activation Code Card that came with the smart lock. Once the smart lock has been reset, all the data previously stored will be deleted, after which you need to reset Z-Wave. See below which Reset procedure applies for you.

Never Connected to Lockly App
Press Reset Button for 3 seconds, and the smart lock will restart and reset.
Connected to Lockly App In the Settings menu of the App, select Perform Factory Reset. The smart lock will restart and reset. After reset, you’ll need the Activation Code to reconnect to the App.

If you replace a new smartphone device, log in your existing Lockly Guard account on the smartphone and reconnect to the smart lock according to the APP prompts.

Reset Button

OFF

ON

2.5 Keypad Display Switch
The exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (interior) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door.

SECTION 2.4 ~ 2.5

5

ENG

2.6 Rebooting Your Lock
Reboot Lockly Guard in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly Guard.
Press and release the reboot button when you want to reboot the lock. Your Lockly Guard will beep once after reboot. Only reboot when necessary.
To reboot, find the reboot button located on the bottom of the exterior side of Lockly Guard. The reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert the paperclip and press down firmly and let go. Your screen should restart and the lock should reboot automatically.

Reboot Button

6

SECTION 2.6

2.7 Low Battery

ENG

When the battery is in seriously low condition, Lockly Guard will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon.

Condition

Indicator

Solution

Low Battery

Battery Icon on the display keypad will light up to indicate low battery . At the same time, Lockly logo on the interior panel will flash red to reminder users that battery is low.

Dead Battery

When there is no display and sounds; and screen is non-functional.

Replace batteries immediately to avoid battery failure. Lockly Guard can still operate up to 300 cycles in low battery condition.
Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock.

-+
9V Alkaline Battery

Your Lockly Guard will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly Guard to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.

SECTION 2.7

7

ENG

2.8 Changing The Battery
Under normal use, the Lockly Guard battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown. Be sure to unscrew the screw located on the top of the cover first by unscrewing counterclockwise before sliding the cover up.
Screw

PROGRAM RESET

-+- + +-+ –

– Make sure the batteries are oriented correctly by matching the orientation displayed. – Replacing the batteries do not reset stored Access Codes. – To see a list of recommended brands, please visit http://LocklyPro.com/support.

Whenever batteries are replaced, reconnecting the smart lock to your smartphone app is required. If you have not yet downloaded the app, visit: LocklyPro.com/app

8

SECTION 2.8

ENG

3.1 Configuring Access
There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here.
To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code.
OK Button

1 2 3 4 5 6 The Default Access Code is

Your new Lockly Guard Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 33 sets of Access Codes can be stored for use at any given time. To add more than 33 sets of Access Codes, you must delete an existing Access Code before adding a new code.
There are different types of Access Codes that can be generated using the Lockly App. Each type of access code have different levels of permission you can select for your guests, tenants, deliveries, helpers, etc., Get the latest updates on access codes, visit: www.support.lockly.com/faq/accesscodes/

SECTION 3.1

9

ENG

3.2 Entering Programming Mode

Program Button

To enter Programming Mode, remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons (See page 8).
Simply press the Program button to enter programming mode.
Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Access Codes previously added by Programming mode will be cleared.

To end Programming Mode, press the Program button anytime. Programming Mode will automatically exit if the keypad is inactive for more than two hundred and forty (240) seconds.

Number

Mode

Add / Delete Access Code or Fingerprint

Z-Wave program settings

After entering Programming Mode, you should see the screen as displayed to the right on your Lockly Guard keypad. PG menu is used to Add or Delete Access Code or Fingerprint. If you have already paired with LocklyPro App, this menu will no longer be displayed. You can only add or delete Access Code or Fingerprint through the LocklyPro App.
For Z-Wave program settings, Please see the Z-Wave Module User Manual included in your package.

10

SECTION 3.2

3.3 Adding an Access Code

ENG

While in Programming Mode, select “1PG” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “1PG” press “1AD” and select “Pd” to add an Access Code.
Enter your new 6 – 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code.
Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number. For example, based on the example image to the left, if you need “1”, you can touch the upper left button. For “6”, you would touch the upper right button.

SECTION 3.3

11

ENG

3.3 Adding an Access Code (Continued)
If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel.
To exit or cancel, you can always press or

If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK Button to return to the Programming Screen and try again.

OK Button 12

SECTION 3.3

3.4 Deleting an Access Code

ENG

While in Programming Mode, select “1PG” to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1PG” press “2DE” and select “Pd” to delete an Access Code.
Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 .
Rotate through different Access Codes shown by touching any number on the screen. If you find the Access Code you want to delete, simply hold the OK Button for 3 seconds. (Continue on next page)

OK Button

SECTION 3.4

13

ENG

3.4 Deleting an Access Code (Continued)
Once you have selected the Access Code you want to delete, Lockly Guard will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press to delete, or to cancel.

NOTE There are two incidents where your Access Code cannot be deleted.

There are no Access Codes set. The factory default Access Code cannot be deleted.

There is only one (1) Access Code saved in the smart lock. At least one code must be registered. Please add another Access Code before attempting to delete the existing code.

No Access Codes Set 14

Only one Active Access Code SECTION 3.4

3.5 Checking the Access Code

ENG

OK Button While in Programming Mode, select “1PG” then select “3CH” to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode.
Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 .
Rotate through the different Access Codes by touching any number on the screen. To exit Check Access Code screen, simply press the OK Button.
If there are no Access Codes registered in your smart lock, Check Access Code mode will be invalid. The default Access Code will not be shown on the display keypad, and you will see the following screen shown to the left instead.

SECTION 3.5

15

ENG

3.6 Z-Wave Settings
In the programming mode, select “2HB” to enter the Z-Wave settings. Refer to the Z-Wave Module User Manual for detailed instructions.

16

SECTION 3.6

ENG

3.7 Adding a Fingerprint*
In this section, you will learn how to register a fingerprint to your new smart lock.
We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly Guard will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable.
Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration.
The following examples show which types of fingerprint patterns will be acceptable. It is highly recommended to enroll at least one finger from each hand in case the hand you are using is unavailable, such as, in instances like if you are holding items in that hand or have sustained an injury.

Fingerprint Pattern with Cross Intersection Lines

Concentric or Parallel Pattern with no Cross Intersection Lines

Fingerprint with Scars or Worn Out Ridges

OK

Not OK

Your smart lock can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you how to add and remove fingerprints if you did not pair your lock with a smart phone.
*only available on 728F ZU

SECTION 3.7

17

3.7 Adding a Fingerprint* (Continued)

ENG

While in Programming Mode*, select “1PG” to add a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “1PG” press “1AD” and select “FP” to register a Fingerprint.
Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior side of Lockly Guard Deadbolt.

Once you’re in Fingerprint Registration Mode you will see two numbers displayed on keypad. The top number is your Fingerprint Registration number, in this example to the left, “1”. The bottom number will always start with a “6”.

You must successfully scan your fingerprint six (6) times for it to properly register. Every time you scan your fingerprint, the number on the bottom will change, starting from 6 – then 5, 4, 3, 2, 1, until the fingerprint is successfully registered.

Note: For reference, please keep a record of your fingerprint registration number to distinguish whom it was registered to.
*only available on 728F ZU

18

*Only works when lock is not paired with a smart phone device.

SECTION 3.7

ENG

3.7 Adding a Fingerprint* (Continued)
Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface.
Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit “6” shown on the screen becomes “1”. If you have successfully scanned and registered your fingerprint, you will hear a long beep, and the Bluetooth icon will flash green.
PASS will show on the keypad and press OK Button to exit. If you did not successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, press OK Button to return to the previous screen to rescan your finger.
For instructions on scanning an optimal fingerprint, please proceed to Section 3.7.

SECTION 3.7

OK Button

*only available on 728F ZU 19

ENG

3.8 Fingerprint Scanning Directions*
The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image.
Sensor Core

Top View OK
Side View OK
20

Position your finger on the center of the sensor
Correct
Incorrect
*only available on 728F ZU SECTION 3.8

ENG

3.9 Fingerprint Scanning Tips & Troubleshoot*
Tips for Fingerprint Enrollment and Recognition
· Place your finger to completely cover the sensor with maximum contact surface. · Position the center of your finger (core) to the center of the sensor. · Hold your finger still for more than a second until you hear a beep. · Scan a finger that is clean and free from dirt. · Children ages 12 and under are not recommended to use fingerprint access due to the
constant changes of their fingers during growth. · Elderly with fading fingerprints may have difficulty in recognition. · If your finger has a cut, scar, or cracked skin due to dryness, try another finger. · To improve the speed and recognition of your fingerprint reader when facing issues in
recognizing your fingerprint due to varying physical and weather conditions like moisture, sweat, cold, or dryness, we recommend adding an additional scan of your finger while in such conditions. This extra scanning process will help enhance the performance of the fingerprint reader and increase its ability to accurately recognize and unlock.
Troubleshooting Fingerprints
In case of poor fingerprint conditions
· If wet – wipe excess moisture from finger before scanning · If dirty – wipe stains and dirt off from finger before scanning · Make sure the sensor is clean from dirt or smudges – wipe sensor with soft cloth regularly
For more troubleshooting help, visit http://LocklyPro.com/support

SECTION 3.9

*only available on 728F ZU 21

3.10 Deleting Stored Fingerprints*

ENG

While in Programming Mode, select “1PG” to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “1PG” press “2DE”, then select “FP” to delete a fingerprint.

Your registered fingerprint numbers will be displayed on the screen. Tap number to rotate to the next registered fingerprint. When you have found the fingerprint ID you want to delete, press and hold the OK button for 3 seconds to delete. (Example shown – “02”)

OK Button

Fingerprint ID Number

You will then see a confirmation page displaying and with the fingerprint number you are deleting displayed in the lower left. Select Y to delete or N to cancel.

Only works when lock is not paired with a smart phone device. If paired to a device please delete your fingerprints from the administrative device paired to your lock.
only available on 728F ZU

22

SECTION 3.10

ENG

3.11 Adding Secure Link
Secure Link adds live status monitoring to your Lockly Guard Smart Lock. Secure Link is not included in your package. It can be purchased separately and added anytime.
To set up the Lockly Guard smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the LocklyPro App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select “Add a New Device” then select “Secure Link Wi-Fi Hub”. Follow the in-app instructions to set up your Secure Link.
If you would like activate this feature you must restore factory setting and pair the lock with the Lockly App.

Visit the link below to purchase:
https://LocklyPro.com/securelink

SECTION 3.11

23

ENG

4.1 Unlocking with Access Codes
Lockly Guard Smart Lock can be unlocked using multiple ways – via your stored Access Code, registered fingerprint, smartphone with Bluetooth, or the physical key supplied with your lock.

OK Button

Slide your hand across the screen to activate the keypad.
Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit.
If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly Guard will flash red light.

Five consecutive wrong attempts will put Lockly Guard in “Safe Mode”. (See Section 4.5)

Lock your Lockly Guard by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed.

You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads. (Sample display shown only)
Hold OK Button (3 sec)

PIN Genie

Fixed Digit

24

SECTION 4.1

ENG

4.2 Unlocking with Fingerprints*
Unlocking
Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right.
To register a fingerprint, please see Section 3.6.
If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can then open the door.
If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again.
For best fingerprint scanning practices, see Section 3.7.

OK Button

Locking
To lock your smart lock, press the OK Button anytime or brush your hand across the screen when the lock is unlocked.

SECTION 4.2

*only available on 728F ZU 25

ENG

4.3 Locking/Unlocking with LocklyPro App
If you want to lock and unlock the door lock through your phone, you need to download the LocklyPro Commercial App and follow the prompts on the app to add the door lock.
Scan or visit LocklyPro.com/app

26

SECTION 4.3

ENG

4.4 Locking/Unlocking with Physical Key
Exterior View

To unlock your lock using the physical key (included), open the key cover on the handle by turning the cover to reveal the keyhole.
Insert your key and turn clockwise or counter clockwise to lock or unlock the door.

SECTION 4.4

27

ENG

4.5 Safe Mode – Overview
Lockly Guard will enter Safe Mode when five (5) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.

Countdown Prompt (Displayed in Minutes)
Will start with 10 and countdown until 0.

Example A

Example B

You will see a “10” on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly Guard will disable the keypad for 20 minutes, displaying a “20” on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above).
Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen.

28

SECTION 4.5

ENG

4.5 Disabling Safe Mode

There are four (4) ways to disable Safe Mode.

Option 1 – Entering Correct Access Code

Activate the keypad by pressing and holding

for 3 seconds.

Enter the correct Access Code twice (2) when the keypad is available, pressing after

every time the Access Code is entered.

Option 2 – LocklyPro Bluetooth App
Use the app that is synced to your Lockly Guard to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you won’t be able to use this option to disable Safe Mode.

Option 3 – Physical Key
There is a pair of keys supplied with your new lock. You may use the keys to manually unlock the door and disable Safe Mode. To learn how to use your physical keys, see Section 4.4.

Option 4 – Registered Fingerprint
Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the keypad once a registered fingerprint is used.

SECTION 4.5

29

ENG

4.6 Rain Mode

Like other digital electronic products water can trigger to activate the touchscreen and sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly Guard to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected.

Activate this feature on the LocklyPro app. While you are within the Bluetooth range or

remotely connected thru Wi-Fi hub (Secure Link), go to Settings > Rain Mode and toggle

the button

to turn ON.

When RAIN MODE is ON, the keypad and fingerprint sensor cannot be used. Unlock via LocklyPro App or physical key. Rain Mode auto exits every 30-mins and re- enters if water or rain is still present.
If you are using the LocklyPro app, you will be notified when Lockly Guard entered rain mode and it will be recorded in your access history.

If you have not yet connected your device to LocklyPro App, follow below steps to activate the rain mode feature:

RAIN MODE ON

RAIN MODE OFF

1. Long press to enter fixed digit keypad. 2. Enter access code +234+ .
example: 135790 + 234 + 3. You will hear a short beep and Bluetooth indicator flashes green once Rain Mode is ON.

1. Long press to enter fixed digit keypad. 2. Enter access code +890+ .
example: 135790 + 890 +
3. You will hear a long beep and Bluetooth indicator flashes green once Rain Mode is OFF.

30

SECTION 4.6

ENG

4.7 Shine Mode
Lockly Guard touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes.
Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the upper left button for 3 seconds.

The touchscreen keypad with automatically return to normal brightness after the screen dimmed.

4.8 Welcome Mode
Welcome Mode temporarily disables auto locking, keeping the door open for a specified period of time eliminating the need to enter access codes, fingerprint or using Mobile App.
Enable this feature through the LocklyPro App. Go to Settings > Enable Welcome Mode, then slide button to enable and set the specific time you require your door unlocked.
To ensure Welcome Mode works normally after replacing the battery, reconnect the lock to the Lockly app to synchronize the time.

SECTION 4.7 ~ 4.8

31

ENG

5.1 Offline Access CodeTM (OAC)
The Offline Access CodeTM (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app.
To use the OAC feature, make sure you download the LocklyPro app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock.
From there, you can then issue an Offline Access CodeTM within the app.
Go to “Access” and choose “Add a New User, then select Offline Access CodeTM (OAC)” and follow on screen instructions to generate your Offline Access CodeTM.
Understanding Offline Access CodeTM (OAC)
OAC are issued to the guest by asking them to enter 4-12 digit number after a double – click on the . Your Lockly Guard randomly generates the Offline Access CodeTM which can be shared to your guests together with the instructions generated using the LocklyPro app.
After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access CodeTM

32

SECTION 5.1

ENG

Important Notes

Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the LocklyPro App. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock. Z-Wave settings take precedence over LocklyPro App. If you setup Auto-lock through Z-Wave controller, the door lock will prioritize the Z-Wave settings.
One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly Guard smart lock is shipped with this feature already activated. You may deactivate this feature through the LocklyPro App.
9V Backup Access When your Lockly Guard is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.6 for more info.
Physical Keys Even though you have your fingerprints registered and Access Codes stored, it’s always best practice to carry your physical keys with you at all times in case for any reason your lock falls into Safe Mode.
Activation Code You may find an Activation Card with an Activation Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly Guard and also forgot your Access Code.
Troubleshooting Please visit http://LocklyPro.com/support for troubleshooting and the most frequently asked questions and answers.

SECTION 6.1

33

ENG

7.1 Cleaning
Making sure your Lockly Guard is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below.

DO
· Rinse the touchscreen with warm water prior to cleaning.
· Use the application of soap with a damp, lukewarm cloth.
· Air dry or wipe dry with a soft microfiber cloth to avoid scratches.

DON’T
· Don’t use abrasives, high alkaline cleaners, or gasoline to clean your lock.
· Don’t apply cleaning detergent directly in sunlight or at high temperatures.
· Don’t leave cleaning detergent on the display keypad for long periods of time – wash immediately.
· Don’t use scrapers, squeegees, or razors.

34

SECTION 7.1

ENG

Safety Precautions
Please read all instructions carefully. Remind all Lockly Guard users of the safety precautions.
Read the following instructions for your own safety
Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN.

Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Guard Smart Lock, contact our customer service department at help@Lockly.com or visit http://LocklyPro.com/support for technical assistance.

SECTION 8.1

35

ENG

FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20cm between the radiator & your body.
IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

http://LocklyPro.com/support

www.P65Warnings.ca.gov.

TOTAL ACCESS SOLUTION
We’re here to help! prosales@lockly.com LocklyPro.com/support

http://LocklyPro.com/support
Pour vous assurer que vous avez accès aux fonctionnalités les plus récentes de votre serrure intelligente Lockly Guard, veuillez consulter le site: www.LocklyPro.com/728fzu
UMPGD768FNU20240201