eufy SoloCam S340 Wireless Outdoor Security Camera User Guide
- June 17, 2024
- Eufy
Table of Contents
eufy SoloCam S340 Wireless Outdoor Security Camera
Product Information
Specifications
- Model: SoloCam S340 (T8170)
- LED Indicator
- Wide-Angle Lens
- Speaker
- LED Light
- Telephoto Lens
- Solar Panel Mounting Hole
- Photosensitive Sensor
- Mounting Hook
- PIR Sensor
- USB-C Charging Port
- Microphone
- SYNC Button
Charging Your Camera
Fully charge your camera before first use. Use a 5V/2A charger and connect it to the USB-C charging port on the camera. The LED indicator will turn solid blue during charging and turn off when fully charged. The charging time is approximately 8 hours.
Setting Up the System
- Download and install the eufy Security app on your device.
- Sign in or create an account in the app.
- Follow the in-app instructions to add the camera to your device list.
Mounting Your Camera
Select a location for your camera that provides the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground. Avoid installing the camera directly facing the monitoring area to prevent potential blind spots. Maintain an angle to ensure no detection is missed.
Select a Solar Panel Location
Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)
- Drill holes using a 15/64 inch (5.95 mm) drill bit with the provided positioning card. Insert the anchors into the holes.
- Connect the solar panel to the camera using the provided USB-C extension cable.
- Firmly secure the camera onto the mounting bracket.
- Install the mounting bracket of the solar panel in a suitable position.
Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling)
- Secure the solar panel’s mounting bracket to the top of the camera.
- Install the solar panel onto the solar panel’s mounting bracket by turning it.
- Connect the USB-C connector to the USB-C port of the solar panel.
- Drill holes using a 15/64 inch (5.95 mm) drill bit with the included positioning card. Insert the anchors into the holes.
Safety
BAIL!
There is a risk of explosion if an incorrect battery type is used. Dispose of used batteries according to their instructions.
Warning:
This product complies with the radio interference requirements of the United Kingdom. Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.eufylife.com.
FAQs
Q: How long does it take to fully charge the camera?
A: It takes approximately 8 hours to fully charge the camera.
Q: What type of charger should I use to charge the camera?
A: Use a 5V/2A charger to charge the camera.
Q: Can I install the camera directly facing the monitoring area?
A: It is not recommended to install the camera directly facing the monitoring area to avoid potential blind spots. Maintain an angle for better coverage.
Q: Where can I find the UK declaration of conformity for this product?
A: The UK declaration of conformity can be found at the following internet address: https://uk.eufylife.com.
Parts
- LED IndicatorLED Indicator
- Speaker
- Telephoto Lens
- Photosensitive Sensor
- PIR Sensor
- Microphone
- Wide-Angle Lens
- LED Light
- Solar Panel Mounting Hole
- Mounting Hook
- USB-C Charging Port
- SYNC Button
CHARGING YOUR CAMERA
Fully charge before first use.
Solid Blue | Charging |
---|---|
Light Off | Fully Charged |
Charging Time | 8 Hours |
SETTING UP THE SYSTEM
- Download and install the eufy Security app, then sign in or create an account.
- Follow the in-app instructions to add the camera to the device list.
MOUNTING YOUR CAMERA
Select a Location and a Height
Select a location where you can get the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground
To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blind spots
Select a Solar Panel Location
- Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power) If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling.
-
Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
-
Connect the solar panel to the camera using the provided USB-C extension cable
-
Firmly secure the camera onto the mounting bracket.
Be careful not to install by mistake. -
Install the mounting bracket of the solar panel in a suitable position.
-
Install the solar panel onto its mounting bracket by turning it, then adjust the angle (20º~30º recommended).
Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling) If the camera is not blocked, install the solar panel directly on the top of the camera
- Secure the solar panel’s mounting bracket to the top of the camera.
- Install the solar panel onto the solar panel’s mounting bracket by turning it.
- Connect the USB-C connector to the USB-C port of the solar panel.
- Drill holes with a 15/64 inch (5.95 mm) drill bit with the included positioning card, then insert the anchors into the holes.
- Firmly secure the camera onto the mounting bracket and adjust the angle (20º~30º recommended).
SAFETY
- The suitable temperature for this device and accessories is -20°C to 50°C (Charging temperature is 0°C to 40°C).
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
- It is recommended to supply the device in an environment with a temperature that ranges from 5°C to 25°C.
- When supplying power, place the device in an environment that has a normal room temperature and good ventilation.
CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS
Warning:
- Replacing a battery with an incorrect type may bypass safeguards and create danger;
- Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
- Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
- A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.
NOTICE
Declaration of Conformity This product complies with the radio interference requirements of the European Community. Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site:
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, useproducts that maintain a 20cm distance between the device and human body. Wi-Fi Operating Frequency Range: 2412~2472MHz; Wi-Fi Max Output Power: 18.47 dBm The following importer is the responsible party (contact for EU matters only) Anker Innovations Deutschland GmbH I Georg- Muche-Strasse 3, 80807 Munich, Germany This product complies with the radio interference requirements of the United Kingdom. Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017(SI2017/1206). The full text of the UK declaration of conformity is available at the following internet address:
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product
CUSTOMER SERVICE
- 12-month limited warranty
- (US) +1 800-988-7973
- (UK) +44 (0) 1604 936200
- (DE) +49 (0) 69 9579 7960
- support@eufy.com
- fb: @EufyOfficial
- twt: @EufyOfficial
- INST: @EufyOfficial
References
- eufy | Built with Care | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>