BESTTEN USP-LS05 Decorator Rocker 4 Way Quiet Switch Instructions
- June 17, 2024
- Bestten
Table of Contents
BESTTEN USP-LS05 Decorator Rocker 4 Way Quiet Switch
WARNINGS AND CAUTIONS:
- TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER or fuse and test that the power is off before wiring!
- To be installed and/or used in accordance with appropriate electrical codes and regulations.
- Use the device with copper or copper clad wire only
INSTALLATION
-
A. Side Wire: Remove insulation approx. 3/4″ (1.91cm).
Connect wires per diagram as follows: Loop wires clock-wise 3/4 turn around terminal screws. Firmly tighten screws over wire loops.
B. Back Wire: Remove insulation per strip gauge on device approx. 5/8″ (1.59cm). Insert wires into holes next to appropriate terminal screws. Tighten screws firmly. -
Mount switch using long mounting screws. Mount wallplate.
-
Restore power at circuit breaker or fuse. Installation is complete.
Note:
- Side Wire: Use copper #14 AWG to copper #10 AWG.
- Push Wire: Use copper #14 AWG ONLY.
WIRING DIAGRAM
➀ To Common Terminal (Black Screw)
➁ Travelers between Switches
➂ Ground (Green Screw)
Warranty
BESTTEN warrants to the original customer that this product is free of defects
in materials and workmanship for one year from the purchase date. Within this
period, simply contact BESTTEN CARE with proof of purchase and reason of
claim. We will replace the product for free.
Any product which is subject to misuse or accidental damage is excluded from
this warranty.
support@ibestten.com
1-800-358-6160(M-F9AM-5 PM PST)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>