BESTTEN USP-2A-20-10PKW Non-Tamper Resistant Outlet User Manual

BESTTEN USP-2A-20-10PKW Non-Tamper Resistant Outlet

Introduction

The BESTTEN USP-2A-20-10PKW is a set of non-tamper resistant electrical outlets designed to provide a reliable and convenient power source for your electronic devices. With a 20-amp rating, these outlets are suitable for various applications in residential and commercial settings.

Specifications

• Model: BESTTEN USP-2A-20-10PKW
• Amp Rating: 20 Amps
• Tamper-Resistant: No
• Color: White
• Quantity: 10 outlets in the package

What’s in the Box

1. 10 x BESTTEN USP-2A-20-10PKW Non-Tamper Resistant Outlets
2. Installation Instructions

Key Features

1. 20-Amp Rating: Suitable for applications requiring higher current capacity.
2. Non-Tamper Resistant Design: Traditional outlet design without built-in shutters.
3. Durable Construction: Built with quality materials for longevity.
4. Easy Installation: Designed for straightforward installation by a qualified electrician.

Dimension

How to Use

1. Ensure that the power is turned off before attempting to install the outlets.
2. Follow the provided installation instructions and local electrical codes.
3. Connect the wires to the appropriate terminals on the outlet.
4. Securely mount the outlet in the electrical box.
5. Turn the power back on and test the outlet for functionality.

Safety Precautions

• Amp Rating: The amp rating of the outlet should match the electrical circuit’s capacity. Using an outlet with a lower amp rating than the circuit can lead to overheating and pose a fire risk.
• Regular Inspection: Periodically inspect outlets for signs of wear, damage, or discoloration. If you notice any issues, replace the outlet promptly.
• Compatibility: Verify that the outlet is compatible with standard electrical devices and appliances.
• Grounding: Ensure that the outlet is properly grounded. Grounding provides an additional safety measure by directing excess electrical current away from the device in the event of a fault.
• Compliance with Codes: Ensure that the outlet complies with local electrical codes and standards. Different regions may have specific requirements for electrical installations.
• Maintenance: Follow any maintenance guidelines provided by the manufacturer. Regular maintenance can help ensure the continued safe operation of the outlet.
• Durability: The outlet should be constructed with durable materials to withstand regular use and environmental conditions.
• Manufacturer’s Instructions: Always follow the manufacturer’s instructions for installation, usage, and maintenance of the specific outlet model you are using.
• Testing: While non-tamper-resistant outlets may not have additional safety features like shutters, it’s still essential to test the outlet regularly to ensure proper functioning

Installation

Maintenance

• Cleanliness: Keep the outlet clean from dust and debris. Use a dry cloth or a cloth slightly dampened with water to clean the surface. Make sure the outlet is turned off before cleaning.
• Tighten Loose Connections: Over time, electrical connections may become loose due to usage or external factors. If you notice any loose connections, turn off the power and tighten the screws on the outlet.
• Test Functionality: Test the functionality of the outlet regularly. You can use a simple electrical tester or plug in a device to ensure that power is being delivered as expected.
• Replace Damaged Outlets: If you observe any damage to the outlet, such as cracks or exposed wires, replace it immediately. Damaged outlets can pose a safety risk.
• Check for Warmth: During operation, outlets should not become excessively warm. If you feel any abnormal warmth, it could indicate an issue with the wiring or connections. Consult a qualified electrician if needed.
• Follow Electrical Codes: Ensure that your electrical installation, including outlets, complies with local electrical codes and standards. If you’re unsure, consult with a professional electrician.
• Securely Mount the Outlet: Ensure that the outlet is securely mounted in the electrical box. Loose outlets can be a safety hazard and may lead to electrical issues.
• Consider Upgrading: If your non-tamper-resistant outlets are older and do not have modern safety features, consider upgrading to newer models that may offer improved safety and energy efficiency.
• Professional Inspection: Periodically, it’s a good idea to have a qualified electrician inspect your electrical system, including outlets, to identify any potential issues and ensure overall safety

Troubleshooting

• Check the Circuit Breaker: Ensure that the circuit breaker corresponding to the outlet is not tripped. If it is, reset it by moving the switch to the OFF position and then back to the ON position.
• Test Other Outlets: Check other outlets on the same circuit. If they are also not working, the issue may be with the circuit breaker or wiring. If they are working, the problem may be isolated to the specific outlet.
• Inspect for Physical Damage: Examine the outlet for any visible signs of damage, such as burn marks, discoloration, or loose wires. If you find any damage, it’s crucial to address it immediately.
• Use a Circuit Tester: Use a circuit tester to check if there is power at the outlet. If there is no power, it could be an issue with the wiring or the outlet itself.
• Reset the Outlet: If the outlet has a reset button, press it to ensure that it’s not tripped. Some outlets have both a test and a reset button. Pressing the test button should trip the outlet, and pressing the reset button should restore power.
• Check GFCI Outlets: If the outlet is part of a circuit with GFCI protection, ensure that any GFCI outlets on the circuit are not tripped. Press the reset button on GFCI outlets to reset them.
• Inspect Wiring: Turn off power to the outlet at the circuit breaker. Carefully remove the outlet cover and inspect the wiring for loose connections or damage. If you’re not comfortable doing this, it’s advisable to consult a qualified electrician.
• Replace the Outlet: If troubleshooting steps do not resolve the issue, consider replacing the outlet. Ensure that the replacement outlet has the same amp rating and is compatible with your electrical system. Follow proper installation procedures.
• Professional Help: If you are unable to identify or fix the problem, or if you’re uncomfortable working with electrical components, it’s best to seek assistance from a qualified electrician.

FAQs

What is the BESTTEN USP-2A-20-10PKW Non-Tamper Resistant Outlet?

The BESTTEN USP-2A-20-10PKW is a Non-Tamper Resistant Outlet that provides power receptacles for electrical devices.

How many outlets are included in a package of BESTTEN USP-2A-20-10PKW?

A package of BESTTEN USP-2A-20-10PKW typically includes 10 non-tamper resistant outlets.

What is the electrical rating of the BESTTEN USP-2A-20-10PKW outlet?

The BESTTEN USP-2A-20-10PKW outlet is typically rated for 125 volts and 15 amperes.

Is the BESTTEN USP-2A-20-10PKW outlet compatible with standard electrical wiring?

Yes, the BESTTEN USP-2A-20-10PKW outlet is designed to be compatible with standard electrical wiring in most residential and commercial settings.

Does this outlet include USB charging ports?

No, the BESTTEN USP-2A-20-10PKW is a standard power outlet without built-in USB charging ports.

Is professional installation required for the BESTTEN USP-2A-20-10PKW outlet?

Professional installation is recommended for electrical outlets, but experienced DIYers may be able to install it following safety guidelines and local electrical codes.

Is the BESTTEN USP-2A-20-10PKW tamper-resistant?

No, the BESTTEN USP-2A-20-10PKW is not tamper-resistant and does not have built-in safety mechanisms to prevent foreign objects from being inserted into the slots.

Can the BESTTEN USP-2A-20-10PKW be used outdoors?

The BESTTEN USP-2A-20-10PKW is typically designed for indoor use and may not be suitable for outdoor installations.

What type of devices can be plugged into the BESTTEN USP-2A-20-10PKW outlet?

You can plug a variety of electrical devices, such as lamps, chargers, appliances, and more, into the BESTTEN USP-2A-20-10PKW outlet.

Is there a warranty for the BESTTEN USP-2A-20-10PKW outlet?

The BESTTEN USP-2A-20-10PKW outlet may come with a warranty. Please refer to the product documentation or contact the manufacturer for warranty details.

Can the BESTTEN USP-2A-20-10PKW outlet be installed in a standard electrical wall box?

Yes, the BESTTEN USP-2A-20-10PKW outlet is typically designed to fit in standard electrical wall boxes.

Is the BESTTEN USP-2A-20-10PKW outlet compatible with GFCI (Ground Fault Circuit Interrupter) circuits?

The compatibility of the BESTTEN USP-2A-20-10PKW outlet with GFCI circuits may vary, so it's advisable to check the product specifications or consult with an electrician.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>