NIU KQi300 Suspension Electric Scooter User Manual

NIU KQi300 Suspension Electric Scooter

Parts Info

Handlebar Functions

• A Power Button
• B Left Turn Signal Button
• C Right Turn Signal Button
• D Throttle

Dashboard Info

1. Headlight

2. Turn Signal Indicator

3. Bluetooth
   Indicates that the scooter is connected to the app

4. Speedometer
   Displays the current speed of the scooter.

5. Pedestrian Mode

   • Speed limit: 3.7 mph ( 6 km/h)
   • Switching method: Short press the
   • Power Button five times to switch to pedestrian mode

6. Riding Mode

   • E-SAVE indicator stays on:
   • E-SAVE mode [9.3 mph (15 km/h) ]
   • E-SAVE indicator goes out: Sport mode
   • E-SAVE indicator flashes: Dynamic mode( set in App)

7. Battery Indicator
   Displays the remaining battery power in battery bar

8. Cruise Mode

9. Warning
   Indicates that the scooter has detected an error. The error code will display on the dashboard. See troubleshooting page for possible causes and solutions

Specifications

1. Average battery life: It is tested when the driver weighting 165 lbs (75 kg) drives at a constant speed of 9.3 mph (15 km/h) on a flat road in the ambient temperature of 77 F (25 C) in case of a full battery. (Factors affecting battery life include speed, number of startups and shutdowns, kinetic energy recovery setting, driver weight, ambient temperature.)
2. Maximum Slope: The maximum gradient that driver weighting 165 lbs (75 kg) gets through at a constant speed of 5 mph (8 km/h) in the ambient temperature of 77°F (25°C) in case of a full battery.

Troubleshooting

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.
   FCC ID:2AZ6G-K3LSD4BT

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.
   This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE: Unauthorized modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>