ZIPRO Mission Electromagnetic Elliptical Trainer User Manual

ZIPRO Mission Electromagnetic Elliptical Trainer

Product Usage Instructions

Safety Instructions:
Please read the instructions carefully before starting the assembly and using the device. The manual contains important information regarding the safe use and maintenance of the equipment. Could you keep it for future reference?

Technical Data:
The power supply is AC 100-240V Output: 9VDC 1000mA. The equipment should be operated within the temperature range of 0°C to 40°C and stored between -10°C to +60°C. The maximum weight capacity is 135 kg.

Assembly Instructions:
Follow the assembly diagram provided in the manual for proper setup of the equipment. Ensure all components are securely attached according to the specified quantities and sizes.

Usage Guidelines:

• Always adhere to the training instructions outlined in the manual.
• Protect the equipment from falls and moisture.
• Handle with care to prevent damage.
• Store the equipment in a stable position.

FAQ:

• Q: What should I do if the power supply is not working?
  A: Check the power source and ensure it meets the specified requirements. If the issue persists, contact customer support for assistance.

• Q: How often should I perform maintenance on the equipment?
  A: Regular maintenance is recommended to ensure optimal performance. Refer to the manual for maintenance guidelines and schedule.

Dear user,
please, read the manual before assembling and using the device for the first time. The manual contains important safety, operational, and maintenance information. Keep it for future reference related to the maintenance or ordering spare parts.

TECHNICAL DATA

Power| Power supply unit Input: AC 100-240V

Output: 9VDC 1000mA

---|---
Weight| 71 kg
Operating temperature| 0°C to +40°C
Storage temperature| –10°C to +60°C
Maximum user weight| 135 kg
Class| H
Accuracy class| C
Speed| –
Product standard (primary)| EN 20957-1:2013
Intended use| Electromagnetic elliptical trainer for home use

SAFETY

CAUTION! The device may be used solely for its intended purpose that is as a training device for adults. Any other use may be dangerous. The manufacturer accepts no liability for any damage caused by the misuse of the device.

• The device has been designed and produced using the latest safety findings. Hazardous elements that can potentially cause injury were eliminated or secured.
• Do not attempt to repair or modify the product yourself.
• Check bolt, screw, and nut tightness once every month or two months.
• To ensure long-term safety, have the device checked and serviced regularly (once a year) by a professional point of sale.
• Any modifications not described in the manual may cause damage or pose a direct threat to the health and life of the user. The device may be modified solely by employees of manufacturer’s technical service or persons trained by the service.
• All devices are part of our innovative development process in order to guarantee high quality. The manufacturer reserves the right to introduce technical modifications.
• Any questions or doubts regarding the device can be handled by an expert point of sale.

CAUTION! Observe general safety regulations and measures for handling electrical devices.

• The device is powered from a 230 V mains network.
• All electrical devices emit electromagnetic radiation during operation. If other devices that emit such radiation (such as cell phones) are placed near the electronic control unit of the dashboard, some values, such as heart rate, may be affected.
• CAUTION! Never modify the mains network yourself. Let experts do it.
• CAUTION! Make sure the power plug is removed from the socket before any repairs, maintenance, or cleaning the device.
• Do not use extension cords to power the device.
• If the device is not used for a long time, remove the power plug from the socket.
• The power cord must not be crushed and should be placed in such a way as to prevent tripping over it.

GROUND
Ground connection prevents electrocution. The device has a ground cable and plug. The plug has to be connected to a correctly installed and grounded mains socket.

DANGER! Incorrect connection of the cable may cause a risk of electrocution.

• Before connecting the device to the mains, make sure the local voltage conforms to the type of the plug.
• Do not modify the plug if it does not fit the socket. In such a case have another socket installed by a qualified electrician.

CAUTION! Inform any bystanders about the hazards occurring when the device is used. Be extremely cautious when children are around.
CAUTION! Before starting a training consult a doctor to make sure it will be safe for you to use the device. You can develop a training plan with an expert. An inappropriate training programme or excessive exercise may pose a hazard to your health and life.
WARNING! Heart rate monitoring systems may be inaccurate. Over-exercising may result in serious injury or death. If you feel faint, stop exercising immediately.
CAUTION! Strictly follow the training recommendations in the manual.

• When choosing the training location take into account safe distances to any potential obstacles. Do not place the device near paths or traffic (roads, gates, passages, etc.).
• Do not use the product close to a wall. The safety zone is 2000 mm long and not narrower than the device.

CAUTION! Be careful during the assembly and do not let children near the assembly area. They may ingest small parts used during the assembly (nuts, bolts, etc.).

RESIDUAL RISK

• If no fall safeguard is applied or it is applied incorrectly, there is a residual risk of falling resulting in skin abrasions, bruises, bone fractures, or even death.
• There is a residual risk of unintended over-exercising caused by incorrect operation or judgement, and also incorrect communication (due to electromagnetic interference, software error, etc.). Even the best software and equipment safeguards cannot prevent software or equipment errors, which can, in theory, cause over-exercise.
• The product is an electric device. Therefore, electric shock, potentially leading to death, is possible.
• The residual risk of suffocation cannot be prevented.
• It can be mitigated by following safety information in the operating manual.
• Unintended or prohibited use may cause other risks not specified here. The specified risk may have been estimated incorrectly.

The risk analysis assessment has been performed on the device ‘as is’. The product assessment and control intricate that the probability of unacceptable risk is very low. The device (its design, operation, and use) does not cause unreasonable risk for the user or third parties under normal circumstances.

TRANSPORT PACKAGING HANDLING MARKS

OPERATION

Make sure the device has been assembled correctly before starting the training.

• Before your first training, get familiar with all the functions and adjustments available for the device.
• Some parts of the device may corrode. It is, therefore, inadvisable to leave the device in a room with a high moisture content. Take care not to allow the device (in particular internal and electronic components) to be exposed to water, beverages, sweat, etc.
• The device is intended for adult training and is NOT a toy. If you allow children to use it at your own discretion, you must provide them with instructions of appropriate use and ensure constant supervision.
• This is not a therapeutic device.
• Slight humming noise may be heard during operation due to the inertial movement of the flywheel caused by the structure. It does not affect the operation of the device. For exercise bikes and elliptical trainers, any possible humming noises heard when rotating the pedals backwards occur for technical reasons and have no negative consequences.
• Noise emissions are greater when loaded.
• Before each training, make sure the protective devices are operational and bolt and plug connections are tight.
• Wear appropriate (sports) shoes during the training.

MAINTENANCE

Carry out maintenance activities at regular intervals. The tasks listed below should be carried out at least every 20 hours of operation.

• Check moving parts of the device. If they need lubrication, use a bicycle bearing grease.
• Check the conditions of such parts as bolts and nuts. Make sure they are tight.
• Wipe the sweat off the device after each training. Make sure the display does not come in contact with water or moisture.
• Clean the product with soapy water only. Do not use cleaning agents.
• Store the device in a dry and warm place.
• Do not expose the device to direct sunlight.

ENVIRONMENT
The device is delivered in a package to protect it against any possible transport damage. The packaging is made from non-processed material and can be recycled. Throw the materials to appropriate colour containers for selective waste collection.
Protect the environment and do not throw used batteries into household wastes. Return them to the point of sale or a special recycling centre.
Used electrical equipment (including the computer and power supply) are recyclable. Do not throw them out with household waste as they may contain substances dangerous to the health and environment. You can actively contribute to sustainable use of natural resources and the protection of the natural environment by handing the used device to a recycling centre for used electrical devices.

ASSEMBLY

The device must be assembled carefully by an adult. In case of doubt, ask a more experienced person for help.

• Prior to the assembly, make sure the set contains all the listed elements and whether none of the parts was damaged during transport. If any parts are missing or you have any other reservations, contact the seller.
• Have a look at the drawings and explanations and follow the assembly manual when assembling the device.
• Be careful during the assembly. There is a risk of injury when using the tools and parts.
• Remember to keep your surroundings safe. Do not let tools and parts lie around in chaos. Remember that plastic foil and bags pose o suffocation risk to small children.
• Assembly parts necessary for a specific step in the assembly manual are shown in pictures and included in instructions. Use the elements indicated in the assembly manual.
• Do not tighten parts completely during the first stages of the assembly. Tighten connections after all parts are placed and fitted properly.
• The manufacturer may have assembled some parts.

ASSEMBLY DIAGRAM

ATTENTION! Do not use parts other than those provided by the manufacturer.

PARTS LIST

ASSEMBLY  INSTRUCTION

CAUTION! Follow the steps below during the assembly and use tools supplied with the product. Prepare sufficient space for the assembly operation. It is advisable to assemble the product with another person because of the weight of some elements.

INSTRUCTIONS FOR ASSEMBLY AND DISASSEMBLY
NOTE! Before assembling, check carefully that all screws are tightened.
NOTE! Be careful with your hands and fingers when folding so that they do not get crushed.

• Remove the left side bolt (48), then lift the left rail (3L) with one hand as shown by the arrow, using the other hand to lift the left roller support (7L) until the bolt (48) automatically pops into the top hole. Hook the cap (55) of the left rail hole (3L) onto the screw C of the left roller support (7L) as shown. Assemble the right rail (3R) in the same way.
• To disassemble the unit, pull out the screw (48) and then remove the cap (55) from screw C. Hold the left roller support (7L) with one hand and lower the left rail (3L) to the ground with the other. Place the left roller support (7L) on the left rail (3L) when the screw (48) automatically slots into the main hole. Lay out the right rail (3R) in the same way.

FOLDING AND UNFOLDING

ADJUSTMENTS
Levelling
Level the device by rotating the levelling feet in the rear and front base.

COMPUTER MANUAL
COMPUTER (MODEL) OT-1PRO
Remove the safety film from the display before use.

AUTO ON/OFF
The computer will switch on once the flywheel is set in motion or when the dial is depressed. The computer will automatically shut down after 3 minutes of inactivity.

DESCRIPTION OF OPERATION

• PRESSING THE DIAL
  • While in activity mode, the display mode can be switched on by pressing the dial.
  • While in activity mode, the data can be reset by long-pressing the dial.
  • Pressing the dial is signalled by a sound.
• TURNING THE DIAL
  • Parameters and functions can be adjusted in standby mode by turning the dial. The value increases when turning clockwise and decreases in the opposite direction.
  • While in activity mode, the resistance level increases as you turn the dial clockwise. Turning it in the opposite direction reduces the level of resistance.

STARTUP IN COUNTDOWN MODE OR IN MANUAL MODE
The computer will activate when motion is detected or when you press the dial and the lights lining the perimeter will be displayed. It will then automatically enter P countdown mode.

In P mode, it is possible to set the countdown of time, distance and calories.

• Press the dial to select the appropriate parameter.
• Turn the dial to set the countdown value for the selected parameter.
• The countdown will start automatically when the user’s movement is detected.

COUNTDOWN PARAMETERS

• TIME: change in value every 1 min, minimum value 1 min
• DISTANCE: change in value every 0.5 km, minimum value 0.5 km
• CALORIES: change in value every 1 kcal, minimum value 1 kcal

If the set value is zero, the workout will start in manual mode.

DISPLAY OF WORKOUT PARAMETERS
The workout parameters are displayed in two windows. When a pulse is detected, which is indicated by the heart icon, the upper window shows the selected resistance level in alternation with the BMP.

The tracked workout parameters are presented in the lower window. The SCAN function is configured by default to display data cyclically, every 3 seconds.
Display order: speed, time, distance, calories.

It is possible to block the display of a given parameter. To do this, press the dial when the parameter you wish to lock is displayed on the screen. After pressing the dial and locking the parameter, the SCAN icon will go out. The computer will only display the selected parameter.

END OF WORKOUT
The computer will emit 3 beeps when it has finished motion detection. The measured data will be reset when standby mode is activated. In P countdown mode, the most recent result achieved will be displayed. Press the dial and hold for 2 seconds to reset the data.

FUNCTIONS (SPECIFICATION)

0,00-999,9 km
CALORIES| Total calories burnt from the start to the end of the exercise. (The measurement is an approximation for comparing training sessions. Do not use for medical purposes).| 0,0-999,9 kcal
LEVEL| Displays the current resistance level.| 1-32
BMP| Displays the current heart rate. ATTENTION! The heart rate is measured for sports purposes only (not for medical use).| 60-240 BPM
BLUETOOTH| The active status of the Bluetooth connection is displayed.| Connected / Not connected

MOBILE APP BLUETOOTH PAIRING
The computer is compatible with Kinomap app.
Start your training and enjoy new possibilities:

• Download the app.
• Enable Bluetooth on your mobile device.
• Start the app and select the ZIPRO device you want to pair.
• When ZIPRO is connected with the app, the computer is turned off and the screen goes blank. From now on, you control ZIPRO through your mobile device.

TRAINING AND PHASES

The use of the device is very beneficial. It will improve your physical condition, strengthen your muscles, and when combined with the right diet, it will help burn excess fat tissue.

1. WARM-UP
   This phase improves blood circulation in the whole body and prepares the muscles for intensive work. It reduces the risk of cramps and injuries. It is advisable to do some stretching exercises as shown below. If you feel pain, stop exercising or reduce the extent of the move.

   • STRETCHING INNER THIGH MUSCLES
     Sit on a flat surface with your legs bent and knees pointing outwards. Put feet soles together and get them as close to you as possible. Slightly push the knees downwards and hold for 15 seconds.

   • THIGH STRETCHING
     Sit on a flat surface. Straighten the right leg and press the sole of the left foot against the tight. Stretch your right arm towards the toes of the right leg as far as possible. Hold for 15 seconds. Repeat for the left leg.

   • HEAD SIDE-TO-SIDE
     Keep your head straight looking forwards. Keep your shoulders still, and rotate the head right. Return your head so that you are looking straight. Next, rotate it left and back to the starting point.

   • SHOULDERS UP-AND-DOWN
     Lift the left hand as high as possible and hold for a few seconds. Repeat for the right hand.

   • ACHILLES TENDON STRETCHING
     Stand facing a wall. Extend the left foot forward and bend the knee a little. Keep your right leg straight and back, with the heel on the ground. Keep both heels flat on the ground and push your hips towards the wall. Hold for 30 seconds. Repeat with the right leg extended. Remember not to arch your back during the exercise.

   • BENDS
     Stand up with your legs together. Bend forwards trying to get your chest as close to the knees as possible. Hold for 15 seconds. Remember not to bend the knees.

2. EXERCISE PHASE
   This is the exercise proper. Maintain your own pace to reach the heart rate appropriate for your age as shown in the chart below.

3. RELAXATION PHASE
   This phase helps steady the circulation and relax the muscles. It is identical to the warm-up phase. Remember not to strain your muscles.

TROUBLESHOOTING

CAUTION! Opening the housing of the device without a prior contact with a manufacturer’s service voids the warranty. If you suspect a failure that requires the housing to be opened, contact manufacturer’s service.

is an object disrupting the balance under the

base of the device.

| Place the device on an even surface.

Remove the object that upsets the balance.

The bases have not be assembled correctly.| Assembly the bases correctly.
Noise during use| Incorrectly tightened elements.| Contact the manufacturer’s service.
Slight humming noise may be heard during operation due to the inertial movement of the flywheel caused by the nature of the structure. It does not affect the operation of the device. Any possible humming noises heard when rotating the pedals backwards occur for technical reasons and have no negative consequences.
Noise and uneven operation| Bearings damaged.| Contact the manufacturer’s service.
Lack of appropriate resistance during training| Resistance adjustment cable connected incorrectly.| Connect the cable correctly as per the assembly manual.
Drive belt loose.| Contact the manufacturer’s service.
The distance between the flywheel and the magnets increased.| Contact the manufacturer’s service.
Voltage regulator Contact the damaged. manufacturer’s service.
No Bluetooth connection| Bluetooth connectivity issues.| Enable Bluetooth on your mobile device. Pair your mobile device with ZIPRO.

WARRANTY

On behalf of the Warrantor, the seller grants a 24-month warranty in the territory of the Republic of Poland starting on the date of sale. The warranty for the product does not exclude, limit, or suspend any rights of the Buyer under the Consumer Rights Act.
The warranty card can be found on the last page.

WARRANTY TERMS AND CONDITIONS

1. The warranty covers only latent defects attributable to the manufacturer.

2. The claim shall be processed by the point of sale or technical service under the warranty if the customer produces:

   • a. a valid and clear warranty card filled in properly with a sale stamp and signature of the seller,
   • b. a valid proof of purchase with the date of sale,
   • c. the reported product or defective part.
     In the case of a remote purchase, the warranty card is valid solely with a proof of purchase (receipt/invoice).

3. The claim is resolved within 14 days of the report by the Customer.

4. Manufacturing defects identified in the warranty period shall be repaired free of charge within 21 days following the delivery of the product to the point of sale or technical service.

5. If it is necessary to import parts for the repair, the warranty repair period may be extended by the time necessary to import the part, not longer than by 40 days.

6. Warranty exclusions:

   • a. mechanical damage and related defects,
   • b. damage and defects resulting from misuse and inappropriate storage, assembly, and maintenance,
   • c. damage and wear of such consumable elements as cables, belts, rubber elements, pedals, foam grips, wheels, bearings, and upholstery,
   • d. activities related to the assembly or maintenance that are user’s obligation in accordance with the manual.

7. The warranty shall not apply when:

   • a. it is past its validity period,
   • b. the customer had repaired or modified the product using non-genuine parts,
   • c. the defect resulted from incorrect installation or a failure to follow the rules of correct operation in accordance with the manual,
   • d. the product is used for purposes other than household use,
   • e. damage occurred during transport.

8. No duplicates of the warranty card are issued.

9. The customer is entitled to the following compensation free of charge:

   • a. product repair,
   • b. product replacement,
   • c. reduced price,
   • d. termination of a contract and full cost compensation.

10. To report a claim:

    • a. Present the product or its reported part.
    • b. Present the proof of purchase with the name and address of the seller, date and place of purchase, type of product, or a valid warranty card with a stamp of the point of sale.
    • c. If the product is delivered dirty, the technical service may refuse to accept it or clean it at customer’s cost following their written approval.

11. If the claim is accepted, the device is repaired or replaced with a new one, or the customer is reimbursed. Transport cost from the service to the customer is covered by a manufacturer’s service.

12. If the claim is rejected, the customer is provided with a detailed justification for the decision and the equipment is sent to them at their cost within 14 days following the provision of the decision.

WARRANTY CARD

Stamp and signature of the seller (Not applicable to remote purchases. See Warranty Terms and Conditions, section 2)|

TECHNICAL SERVICE CENTRE: Wiejska 166, 41-216 Sosnowiec, Poland
MANUFACTURER: Morele.net Sp. z o.o.
al. Jana Pawła II 43b, 31-864 Kraków, Poland
NIP (Tax ID) 9451972201
KRS (National Court Register) 0000390511
Made in China

Manufacturer – Morele.net sp. z o.o. al. Jana Pawła II 43b, 31-864 Cracow, Poland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>