Mi 29991 Precision Screwdriver Kit User Manual
- June 17, 2024
- Mi
Table of Contents
Mi 29991 Precision Screwdriver Kit
Specifications
- Product Name: Mi Precision Screwdriver Kit
- Manufacturer: Xiaomi Communications Co., Ltd.
- Manufactured by: Shanghai HOTO Technology Co., Ltd.
- Address: Building 45, No.50 Moganshan Road, Putuo District, Shanghai, China
Product Overview
Thank you for purchasing the Mi Precision Screwdriver Kit. Read this manual
carefully before use, and retain it for future reference.
- Inner Storage Case
- Bits
- Screwdriver Handle
- Storage Case Shell
How to Use
- Open the storage case by pressing it from the top.
- Store the bits in the designated compartment.
- Attach the desired bit to the screwdriver handle.
- Use the screwdriver to tighten or loosen screws as needed.
- After use, store the bits back in the storage case and close it.
Precautions
The illustrations of the product, accessories, and user interface in the
user manual are for reference purposes only. Actual product and functions may
vary due to product enhancements.
FAQ
-
Q: Can I use this screwdriver kit for electronics repair?
A: Yes, the Mi Precision Screwdriver Kit is suitable for various electronics repair tasks. -
Q: How many bits are included in the kit?
A: The kit includes multiple bits for different screw types and sizes. -
Q: Can I purchase additional bits for this screwdriver kit?
A: Yes, additional bits can be purchased separately to expand the versatility of the screwdriver kit. -
Q: How do I clean the screwdriver handle?
A: Use a soft, dry cloth to clean the screwdriver handle. Avoid using water or harsh chemicals. -
Q: Is there a warranty for the Mi Precision Screwdriver Kit?
A: Please refer to the warranty information provided by Xiaomi Communications Co., Ltd. for details on the product warranty.
Product Overview
Thank you for purchasing the Mi Precision Screwdriver Kit. Read this manual carefully before use, and retain it for future reference.
- Inner Storage Case
- Bits
- Screwdriver Handle
- Storage Case Shell
How to Use
- Opening / Closing the Case
- The inner storage case will pop up after pressing it from the top.
- Press the inner storage case from the top again to close it.
- Bit Storage
- The bits in the inner storage case are held in place by magnetic absorption.
- Place the bit in its slot after using it, it will stick into the slot by itself.
- Using the Screwdriver
- Before use, directly insert the bit into the screwdriver handle.
- Once the bit is installed into the screwdriver handle, it is magnetic and can attract most screws.
Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Precautions
- After pressing the inner storage case from the top, it will pop up and can be easily slid out.
- Disconnect the power source before working on any electrical equipment.
- Keep out of reach of children.
Specifications
- Model: MJJXLSD002QW
- Maximum torque: 2 N·m
- Net Weight: 280 g
- Storage Case Dimensions (L x W x H): 168 × 67 × 17 mm Screwdriver Dimensions (L x W x H): 126.5 × 10 × 10 mm
- Bit Specifications: C4 × L28 mm
- Bit Types: Y1, Y0.6, PH000, PH00, PH0, PH1, SL1.5, SL2.0, SL3.0, W1.5, P2, P5, T2, T3, T4, T5H, T6H, T8H, T9H, T10H, H1.5, H2.0, U2.6, ▲2.3
Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Shanghai
HOTO Technology Co., Ltd.
(a Mi Ecosystem company)
- Address: Building 45, No.50 Moganshan Road,
- Putuo District, Shanghai, China
- For further information, please go to www.mi.com