better bathrooms BeBa 26263 Traditional Column Radiator with Towel Rail Owner’s Manual

better bathrooms BeBa 26263 Traditional Column Radiator with Towel Rail

Product Information

The Regent Traditional Towel Radiator is a high-quality bathroom product designed to provide both functionality and style. It is available in two different models: BeBa_26263 and BeBa_26264, as well as BeBa_28291 and BeBa_28292. The radiator is made from steel with a plated finish, giving it a sleek and elegant appearance. It has received numerous awards, including the National Business Awards UK and the Digital Entrepreneur Awards.

Specifications

• Product Code:
  • BaBa_26261
  • BaBa_26262
  • BaBa_26263
  • BaBa_26264
  • BaBa_28291
  • BaBa_28292
• BTU:
  • BaBa_26261 – 1386
  • BaBa_26262 – 1386
  • BaBa_26263 – 1740
  • BaBa_26264 – 1740
  • BaBa_28291 – 1740
  • BaBa_28292 – 1740
• Wattage:
  • BaBa_26261 – 406
  • BaBa_26262 – 406
  • BaBa_26263 – 510
  • BaBa_26264 – 510
  • BaBa_28291 – 510
  • BaBa_28292 – 510

Product Usage Instructions

Installation

• Step 1: Before starting any installation, turn off the water supply. Also, check the desired location for drilling to ensure no pipes or wires can be damaged.
• Step 2: Prepare the water supply pipes to match up with the towel radiator and valve dimensions being used. Fit the radiator valve tail and nut into the radiator (not supplied) at both sides and use sealing tape to tighten into position.
• Step 3: Mark the positions of the wall and floor brackets on either side of the radiator. Use a spirit level to ensure they are aligned. Then, use an 8mm drill bit to drill into the marked positions. If drilling into tile, it is recommended to tape the wall to prevent the drill from slipping.
• Step 4: Insert all the wall plugs and tap them flush to the finished wall surface. Next, position the wall brackets and screw them into place using the provided screws. Once the wall brackets are secure, push the radiator on until it is firmly fixed into place.
• Step 5: Secure each wall bracket with the grub screws provided. Then, finish securing the radiator by screwing down the floor brackets using the provided screws.
• Step 6: Insert the air vent at the top of the radiator and add a little sealer tape to secure it. Tighten the air vent, but be careful not to overtighten. Finally, fit the radiator valves to the pipework and connect them to the radiator valve tail. Tighten all connections securely.
• Step 7: IMPORTANT! The product is supplied unfilled. If the radiator is not being connected to the central heating system, it should be filled with a water (80%) and glycol (20%) mixture. Leave a 5% air gap.

After Installation

Cleaning:
To maintain the surface of your towel radiator, wipe it with a clean damp cloth and then wipe it dry. Do not use abrasive cleaning agents or materials as they can strip and scratch the surface, which may invalidate your guarantee. It is recommended to wipe and dry the radiator regularly.

FAQ

• Q: Can I connect the towel radiator to my central heating system?
  A: Yes, the towel radiator can be connected to the central heating system.

• Q: What materials do I need for installation?
  A: You will need a spanner, flathead screwdriver, Philips screwdriver, tape measure, drill and 8mm drill bit, spirit level, pencil, and sealing tape.

• Q: How do I fill the radiator with water and glycol mixture?
  A: If the radiator is not being connected to the central heating system, you can fill it with a water (80%) and glycol (20%) mixture. Leave a 5% air gap.

• Q: How should I clean the towel radiator?
  A: To clean the radiator, wipe it with a clean damp cloth and then wipe it dry. Do not use abrasive cleaning agents or materials.

Regent Traditional Towel Radiator

• BeBa_26263 and BeBa_26264
• BeBa_28291 and BeBa_28292

Congratulations on your purchase

Welcome to our growing gang of savvy shoppers

• We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
• As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
• We hope your new product goes above and beyond your expectations. However, should any problems occur, please:
  • log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login.
  • contact us via betterbathrooms.com/content/contact-us.

Important information

• Please read these instructions thoroughly and retain them for future reference
• Pressures should meet the minimum stated on the website
• Pressures must be balanced for optimum performance
• Always check for pipes and cables before drilling

BTU & Wattage info

Package Contents

• 1 x radiator
• 12 x screws
• 12 x screw plug
• 1 x air vent
• 2 x wall bracket
• 2 x grub screw
• 1 x allen key

Parts

Please note that Parts are for illustrative purposes only and may differ slightly to the actual product

Tools required

• Spanner
• Flathead screwdriver
• Philips screwdriver
• Tape measure
• Drill and 8mm drill bit
• Spirit Level
• Pencil
• Sealing tape

Installation

The system pipes must be flushed prior to installation.

• Please note: Before starting any installation, turn off the water supply.
• Please note: Before commencing any installation, the desired location should be checked before drilling, so that no pipes or wires can be damaged.

First, prepare the water supply pipes to match up with the towel radiator and valve dimensions being used. Fit the radiator valve tail and nut into the radiator (not supplied)(at both sides) and using sealing tape, tighten into position, then follow the installation below.

1. Mark the positions in the wall and floor brackets (on the wall) on either side (1a). Use a spirit level to ensure these are aligned then using a drill and 8mm drill bit, drill into the marked positions (1b).
   • Please note: If drilling into tile, it is recommended to tape the wall to prevent the drill from slipping.
2. Insert all the wall plugs (2a) and tap flush to the finished wall surface. Next, position the wall brackets and screw into place using the screws provided (2b). Once the wall brackets are secure, push the radiator on until fixed firmly into place (2c).
   • Please note: You may need two people to hang the radiator, depending on the model purchased.
3. Next, secure each wall bracket with the grub screws provided (3a) then finish securing the radiator by screwing down floor brackets using the screwsprovided (3b).
4. Insert the air vent in the top of the radiator, (add a little sealer tape to secure) and tighten, be sure not to overtighten then fit the radiator valves to the pipework and connect to the radiator valve tail and tighten all connections.

IMPORTANT! The product is supplied un-filled.
The radiator should be filled with a water (80%) and glycol (20%) mixture if NOT being connected to the central heating system, also allow 5% air gap.

After installation

• After the above installation, turn on the water supply and using the flathead screwdriver, open the air vent via the central screw, open the inlet valve and let the water rush into the radiator. Check all connections for leaks.
• Once water overflows from the air vent, this means that there will be no air bubbles present.
• Use a screwdriver to close the air vent and then the radiator is ready to use.

Cleaning

• This radiator is made from steel with a plated finish. To maintain the surface of your product, wipe with a clean damp cloth and wipe dry.
• Do not use abrasive cleaning agents or materials that can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.
• It is recommended to wipe and dry regularly.

For more information

• visit: betterbathrooms.com.
• email: customerservices@buyitdirect.co.uk.
• call: 0330 390 3062
• write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA.

References

• Better Bathrooms - Login

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>