j5create JTSA101 Ergonomic Monitor Mount Instruction Manual

**j5create JTSA101 Ergonomic Monitor Mount Instruction Manual

**

Content

Clamp Installation Pack

Grommet Installation Pack

Step.01

Clamp Installation
※If you prefer grommet installation please look at the “Grommet Installation” section at the right end of the manual.

Please tighten the screw firmly to prevent the arm from falling off

Step.02

Please ensure the orientation of object B matches the picture and install it to the bottom

Step.03

Slide the screws into the bracket slot.

Step.04

First, screw the two screws into the screen and leave about 3mm gap for the next installation step.
Step.05

Slide the screws into the bracket slot.

Tighten the screws on the top first.

Tighten the screws on the top first.

Step.06

You can place the cable in the storage slot, and then assemble the storage cover.

Complete

Movable Angle

Turn this screw to adjust the tightness of the pivot.

Turn this screw to adjust the tightness of the gas spring.

Grommet Installation
※The table needs to have a hole or you can drill a hole yourself.

Please tighten the screw firmly to prevent the arm from falling off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>