cecotec Squad V 3001 Maximale Leistung Instruction Manual

cecotec Squad V 3001 Maximale Leistung

Product Information

Bolero Squad V 3001

Specifications

• Model : Bolero Squad V 3001
• Safety Instructions : Yes
• Parts and Components : Yes
• Installation Instructions: Yes
• Operation Instructions : Yes
• Cleaning and Maintenance Instructions: Yes
• Troubleshooting Guide : Yes
• Technical Specifications : Yes
• Disposal Instructions : Yes
• Technical Support and Warranty : Yes
• Copyright Information : Yes

Product Usage Instructions

1. Parts and Components
   The Bolero Squad V 3001 comes with the following parts and components:

   • Utensils with handles
   • Glass cooking surface
   • Control panel
   • Timer
   • Power cord

2. Before Use
   Before using the Bolero Squad V 3001, please follow these steps:

3. Read the safety instructions carefully.

4. Inspect the product for any damages or defects.

5. Ensure that the power cord is properly connected to a suitable power source.

6. Make sure the glass cooking surface is clean and free from any debris.

7. Installation
   To install the Bolero Squad V 3001, please refer to the installation instructions provided in the manual.

8. Operation
   Follow these steps to operate the Bolero Squad V 3001:

9. Turn on the power switch located on the control panel.

10. Select the desired cooking temperature using the temperature control buttons.

11. Place the utensils with handles on the glass cooking surface.

12. Set the timer if required.

13. Monitor the cooking process and adjust the temperature as needed.

14. Cleaning and Maintenance
    To clean and maintain the Bolero Squad V 3001, please follow these instructions:

15. Ensure that the product is turned off and unplugged from the power source.

16. Allow the glass cooking surface to cool down before cleaning.

17. Use a soft cloth or sponge with mild detergent to clean the surface.

18. Avoid using abrasive cleaners or sharp metal scrapers as they may scratch the glass.

19. Do not use a steam cleaner.

Frequently Asked Questions

1. Q: Can I use the Bolero Squad V 3001 with a broken glass cooking surface?
   A: No, you should not use the product with a broken or cracked glass cooking surface. It is recommended to replace any damaged parts before using the appliance.

2. Q: Can I control the Bolero Squad V 3001 with an external timer or remote control system?
   A: No, the Bolero Squad V 3001 does not support external timers or remote control systems. It should be operated using the built-in controls.

3. Q: Are the handles of the utensils hot after use?
   A: Yes, the handles of the utensils may be hot to touch after use. Please ensure that the handles do not come into contact with other surfaces to prevent burns.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• This symbol means “caution, hot surface”. The temperature of the accessible surfaces may be high when the appliance is in operation.
• WARNING: if the surface is cracked, turn off the appliance to avoid the possibility of electric shock. Contact the official Cecotec Technical Support Service. Do not cook on a cracked or broken hob.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass, as they may scratch the surface, which could result in glass breakage.
• Do not use a steam cleaner.
• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Risk of fire: Do not store objects on the cooking surfaces.
• CAUTION: the cooking process must be supervised. A short-term cooking process must be continuously monitored.
• WARNING: unattended cooking on a greasy or oily hob can be dangerous and could result in a fire.
• WARNING: unsupervised cooking on a cooking hob with grease or oil may be dangerous and cause a fire. Never try to put out the fire with water, turn off the device and cover the flame, for example, with a lid or a fireproof blanket.
• Unplug the cooking hob before carrying out any cleaning or maintenance task.
• The appliance must not be installed behind a decorative door to avoid overheating.
• Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.
• Careful: the panel edges are sharp. Failure to exercise caution may result in injury or cuts.
• Do not place any flammable material or product on this appliance at any time.
• It is recommended that a suitably qualified person installs and connects the appliance correctly.
• This appliance must be connected to a circuit fitted with an isolating switch that allows total disconnection from the mains.
• If the device is not correctly installed, any guarantee or liability claims may be voided.
• If the cable is damaged, it must be replaced by the manufacturer, the supplier, or qualified personnel to avoid hazards.
• The cookware handles may be hot to the touch after use. Check the cookware handles do not overlap other cooking areas that are on. Keep the handles out of the reach of children. Failure to follow this advice may result in burns.
• After use, always turn off the cooking areas and the hob as described in this manual.
• WARNING: the device and its accessible parts become hot during use. Be careful not to touch the heating elements. Children under 8 years old must stay away from the device, unless they are constantly supervised.

PARTS AND COMPONENTS

Fig. 1

1. Cooking zone 1
2. Cooking zone 2
3. Cooking zone 3
4. Cooking zone 1 indicator light
5. Cooking-zone 1 selection icon
6. Cooking zone 2 indicator light
7. Cooking-zone 2 selection icon
8. Cooking zone 3 indicator light
9. Cooking-zone 3 selection icon
10. Triple cooking-zone selection icon
11. Increase icon “+”.
12. Decrease icon “-”.
13. Timer display
14. Timer icon
15.  Safety child lock icon
16. Power icon

Please note
The graphics in this manual are schematic representations and may not exactly match the appliance.

 BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Ceramic hob
• Electrical tape
• Support feet
• Instruction manual

First use
Important

• The surface of the ceramic hob must be cleaned as described in the cleaning and maintenance section.
• Switch on both cooking zones for 5 minutes at maximum power, but do not switch them on simultaneously. Place a saucepan half full with cold water in each zone. This will help to eliminate any new odours and evaporate any moisture that may have formed in the heating elements during transport.
• Do not switch on both cooking zones at the same time.

INSTALLATION

Electrical connections
Before connecting the appliance, make sure that the supply voltage indicated on the product marking corresponds to your mains voltage.
Warning

• This appliance must be connected to an earthed socket.
• If the mains cable is to be replaced, the earthing conductor (yellow/green) must always be 10 mm longer than the line conductors.
• Make sure that the temperature of the power cable does not exceed 50 °C.
• If the power cable is damaged, it must be replaced by the manufacturer or the official Cecotec Technical Support Service to avoid any potential risk.

Before installing the ceramic hob
Figure 2 shows the dimensions required for the recess in which the ceramic hob is to be installed.
Warnings

• Surfaces in direct contact with the plate must be heat resistant (min. 95 °C).
• The appliance can be installed on a worktop with a thickness between 30 and 40 mm and close to walls that are higher than the worktop, maintaining a minimum distance of 100 mm.
• Make all relevant cuts in the surface/countertop and then carefully remove any shavings or sawdust before fitting the hob.
• To ensure correct ventilation of the hob, respect the dimensions indicated in figures 2 and 3.
• Make sure that the surface is level and square and that no parts interfere with the space required for installation.
• Cut as shown in figures 2 and 3.

Installing the ceramic hob

Take the hob and the instruction manual out of the box.

Before assembling and installation, carefully read this instruction manual.

1. Step 1
   Place a towel or cloth on the worktop surface and place the hob face down on it. Fig. 4

2. Step 2

   • Place the sealing tape supplied with the hob to seal it on the worktop surface.
   • Do not use silicone. Apply the tape to the edge of the bottom of the hob, leaving about 3 mm from the edge of the glass.
   • Apply the tape all around the perimeter.
   • Cut off the excess and join the two ends of the tape to match. Fig. 5Q

3. Step 3

   • Secure the brackets (4 or 5 pieces) at the front and rear with screws. Place the hob in a well centered position on the pre-cut board or worktop.
   • Make sure that the front edge of the hob is parallel to the side edge of the worktop. Fig. 6

Important

• Ventilation requirements shown in figure 7 must be respected.
• There are ventilation holes around the exterior of the hob. You must ensure these gaps are not blocked by the worktop when placing the hob.
• Do not use a silicone sealant to seal the device. This will make it difficult to remove the hob in the future, especially if maintenance work is required.
• When fitting the hob, turn it carefully and place it gently into the recess in the worktop.

Installation guidelines. Fig. 8

• The ceramic hob is designed to operate with two-phase alternating current (400V2N~50Hz). The nominal voltage of the hob heating elements is 230 V. The ceramic hob can be adapted for single-phase operation by means of a suitable bridging in the junction box according to the following wiring diagram. The wiring diagram can also be found on the junction-box cover. Remember that the connection cable must match the type of connection and the power rating of the ceramic hob.
• The connection cable must be fixed in an anti-friction clamp.

Warning!

• Remember to connect the safety circuit to the terminal in the junction box.
• The power supply to the ceramic hob must be fitted with a safety switch that allows the power to be switched off in an emergency. The distance between the working contacts of the safety switch must be at least 3 mm.
• The cable connections must be made in accordance with the wiring diagram on the bottom of the hob.
• Each type of cable must be connected to the corresponding power terminal box.
• You must use a good quality screwdriver to carefully and completely tighten ALL terminal screws.
• If only two zones work when you switch on the hob for the first time, you should double-check that all terminal screws are tightened securely. This must be done before contacting the official Cecotec  Technical Support Service.

Important

• DO NOT connect the appliance to the mains using a 13 A plug and socket.
• It must be connected to a 30 A double-pole fused socket outlet, with a contact separation of 3 mm and located in an easily accessible place next to the appliance. It must not be placed above the appliance or more than 1.25 m from the appliance.
• The cable can be coiled, if necessary, but make sure that the cable is not kinked or pinched when installing the hob. Do not allow the cable to come into contact with hot parts of the appliance.

Replacing the power cable. Fig. 9

If the mains power cable is damaged, it must be replaced with a suitable one, please contact the official Cecotec Technical Support Service or a qualified technician.

The power cable must be replaced according to the following instructions:

1. Switch off the appliance.
2. Open the terminal block located at the bottom of the hob.
3. Unscrew the terminal screws securing the cable.
4. The “green-yellow” earth cable must be connected to the marked terminal. It should be about 10 mm longer than the power and neutral cables.
5. The “blue” neutral cable must be connected to the terminal marked with the letter (N) – the power cable (L1) must be connected to the terminal marked with the letter (L1) (220-240 V 1N～). Fig. 9
6. The “blue” neutral cable must be connected to the terminal marked with the letter (N) – the L1 power cable must be connected to the terminal marked with the letter (L1). The L2 cable must be connected to the terminal marked with the letter (L2) (380-420V 2N～). Fig. 9

OPERATION

1. Switch on
   When the power is turned on, the hob will beep once to indicate that the power is on. Then, all indicators on the display will light up for 2 seconds. Next, the appliance will go into shutdown mode.
   Please note

   • The indicator lights will not light up if there is no multi-ring heating function.
     Shutdown mode: the entire display will turn off except for the residual heat indicator light. Except if you press and hold the power icon, the rest of the icons will not be activated.

2. Standby mode

   • When the hob is switched off, press and hold the power icon for 3 seconds. The hob will beep and enter standby mode.
   • The cooking zone indicator lights will show “0” (the letter “H” will be displayed on the cooking zone indicator light if there is residual heat, and the decimal point will flash); the timer display will also show “00”.
   • In standby mode, each cooking zone can be heated; if no cooking zone is heated the appliance will automatically switch off after 10 seconds and beep.

3. Switch-off
   In standby or heating mode, press and hold the power icon for 3 seconds, a short beep will sound and the device will switch to off mode. If the surface of the relevant cooking zone currently has residual heat, the power level indicator display will show “H” and indicate a residual heat warning.

4. Heating control

   • In standby mode, you can choose the cooking zone by pressing the cooking-zone selection icon. Then, press the “+/-” icons to set the power level. Press and hold the “+/-” icons to continuously increase or decrease the power level.
   • When the cooking zone is heating, long press the power icon for 3 seconds to switch off and stop heating of the 3 cooking zones. The indicator light of the corresponding cooking zone that has been heated before will flash and display the high temperature warning symbol “H”.
   • In standby mode, if any cooking zone still has residual heat, the display will show the high temperature symbol.
   • If you need to switch off one of the cooking zones, you can select that zone first and then press the “-” icon to power level “0” to switch off that zone, which will not affect the heating of the other cooking zones. When the power level reaches “0”, the indicator of the corresponding cooking zone that has been heated up before will show the high temperature warning symbol.
   • If more than one cooking zone is operating at the same time, the total power will be equal to the sum of the powers of all cooking zones in operation. Each cooking zone will operate according to its power modulation ratio and will not affect each other.
   • Notes
   • During cooking, only one function can be activated or one of the icons on the hob can be selected, i.e., only one decimal point will be displayed.
   • Press the “-” icon to set the power level to “0”; the hob will automatically switch off.
   • Each cooking zone has 9 power levels.

Multi-ring heating function

1. Triple cooking ring functio n: The outer ring can only be switched on once the inner ring is switched on.
2. Press the cooking-zone selection icon you wish to heat; the decimal point will be shown on the display of the corresponding cooking zone.
3. Select the desired power level.
4. Press the triple ring selection icon to activate the outer ring, the corresponding indicator light of the outer ring cooking zone will light up.

Triple cooking ring function: The outer ring can only be switched on once the inner ring is switched on.

1. Press the cooking-zone selection icon you wish to heat; the decimal point will be shown on the display of the corresponding cooking zone.
2. Select the desired power level.
3. Press the triple ring selection icon to activate the outer ring, the corresponding indicator light of the outer ring cooking zone will light up.
4. The second ring shall be activated when pressed for the first time, the third ring shall be activated when pressed for the second time, and the outer ring shall be deactivated when pressed for the third time.

Deactivation of the multi-ring cooking function

1. Press the cooking-zone selection icon you wish to heat; the decimal point will be shown on the display of the corresponding cooking zone.
2. Press the triple ring/multiple ring selection icon to deactivate the outer ring.

Setting the power level

• Press the cooking-zone selection icon to choose the corresponding cooking zone, using the “+/-” icons to adjust the power level.
• Pressing and holding either of these icons will adjust the zone indicator light value up or down. Each time you press the “+” icon, the power level will increase by one, up to level 9; each time you press the “-” icon, the power level will decrease by one, down to level 0 (each time you press the “+” or “-” icon, a short beep will sound).
• Once the power level adjustment is completed, the decimal point on the display will stop flashing and will normally display the power level after 10 seconds of inactivity.
• When the power level of any cooking zone is changed to 0, that cooking zone will be switched off.
• If the power level of all cooking zones is “0”, the appliance will automatically switch off after 1 minute of inactivity.

Fast heating function

• Press the “+/-” icons to set the power to level 9, then press the “+” icon to make the cooking zone alternately display “A” and “9”.
• Press the “-” icon to adjust the final level of fast heating required.
• Press the “+” icon to reach power level 9 and then, press once more to activate the fast-heating function. The cooking zone indicator will show “A”. Continue by pressing the “-” icon and choose the cooking power level.

The power and timetables for fast heating are as follows:

1

|

3

|

4.8

|

6.5

|

8.5

|

2.5

|

3.5

|

4.5

|

5

For example, press the “+” icon to select “A”, and press the “-” icon to select power level 4. The hob will start cooking at power level 9 for 6.5 minutes. Then, it will greturn to the set power level 4.
Attention

1. You can only reduce the maximum power in the fast-heating mode by pressing the “-” icon for the first 30 seconds, otherwise you will exit the fast-heating mode.
2. If it heats up rapidly at full power after 30 seconds, while it continues to alternately display “A” and “9”, press the “+” icon and the hob will remain in fast heating mode.
3. When changing the power level, the elapsed time will be automatically calculated in the heating time corresponding to the new power level.
4. If you press the “-” icon at any level during the first 30 seconds of the fast-heating mode, the elapsed time will be calculated at the new set level time, after heating in that remaining time, the hob will return to the normal heating mode.

Safety child lock icon

• The hob can be locked by pressing and holding the child lock icon for 3 seconds while the appliance is in standby or heating mode. The safety child lock icon will show up. When the appliance is switched off, the child lock icon will turn off.
• To show that the safety child lock function has been activated, the safety child lock indicator light will light up.
• To deactivate the safety lock function, long press the security lock icon.
• When the safety lock is activated, you cannot icons on the control panel except the power icon.

Please note
To prevent malfunction, if the safety lock is activated by pressing the safety lock icon and
is not cancelled before the ceramic hob is switched off, the safety lock function will still be active when the appliance is switched on again. If the security lock is not deactivated, you will not be able to use any of the other icons except for the power icon.
Setting the timer

• The hob has a timer that counts down from 1 to 99 minutes. If the timer display shows 0 for the initial status, press the “-” icon, the countdown period will be from 30 to 0. At the end of the countdown period an acoustic signal will sound for 2 minutes. Press any icon within 2 minutes to stop it.
• Press the timer icon. Use the “+/-” icons to set the countdown time, by pressing the “+” icon first, the timer will start from 1.
• If you want to cancel the timer, you can set the timer time to zero.
• The timer display will show the countdown time being programmed.
• The timer display will increment in 1-minute increments each time the “+” icon is pressed, and a short beep will sound.
• The timer display will decrease in 1-minute intervals each time the “-” icon is pressed, and a short beep will sound.
• If the set time exceeds 99 minutes, the timer display will return to “0”.

Notes

• To set the timer, press the timer icon and use the “+/-” icons to enter a new time.
• After selecting the cooking zone, you can set the timer before adjusting the power level if you do so within 10 seconds (the decimal point of the corresponding display will flash, 1 time every second). If no operation is performed after the timer is set, the timer will automatically return to 0 (the display will show 00), and the decimal point will turn off.
• After starting the cooking zone, during and after the timer setting, the corresponding cooking zone indicator light will flash (once every second) and will keep flashing until the end of the timer.

Minute hand
The hob timer can be used as a timer for any of the cooking zones without affecting the cooking process or the power setting of each zone, and each value can be different.
Timing of a single cooking zone
To set the countdown time for a cooking zone, first press the timer icon. The decimal point on the display of the selected cooking zone will light up. The decimal point on the timer display will be shown to indicate that the timer set has been related to the selected cooking zone. At this point, you can use the “+/-” icons to adjust the countdown time.

Timing of several cooking zones

• Each timer setting operation shall be the same as “Timing of a single cooking zone”. As long as a countdown time is set for the cooking zone, the corresponding indicator light for that zone will flash.
• Press any cooking-zone selection icon, and the timer display will show the timer value for that cooking zone.
• When no cooking zone is selected, the display will show the minimum timer value for all zones.

Pre-set time
The 3 cooking zones have a pre-set timer function. If the timer is not set manually, the pre-set timer and power level relation will be as follows:

1

|

3

|

4.8

|

6.5

|

8.5

|

2.5

|

3.5

|

4.5

|

5

When all preset times are reached, the cooking zones will automatically switch off and enter standby mode.
High temperature warning

• Press and hold the power icon manually for 3 seconds until it switches off. The whole appliance will stop heating, but the cooking surface will still have a high temperature. The display of the relevant cooking zone that has stopped heating will show the residual heat warning symbol “H” to indicate the high temperature of the relevant cooking surface.
• Provided that the cooking zone has been heated up before, the corresponding indicator light will continue to show “H” for 20 minutes after switching off.

Protection function

• Protection against high temperatures: When the hob temperature is too high, the mechanical self-temperature limiting protection device will start, then the hob will stop heating and will start heating again when the temperature drops.
• Protection against residual heat: When the whole appliance stops heating, the digital tube of the relative heating zone will display the high temperature warning symbol, indicating that the temperature of the cooking surface is too high. Please, do not touch to avoid getting burnt.
• Safety shutdown protection: For plug-in models, when switched off after one second at any time, the voltage between L/N of the plug must fall below the safe voltage range.
• Fault in the connection of the display board and the power supply board : When the appliance is switched on, if the display board does not receive the correct signal from the power supply board for 20  consecutive seconds, the 2-digit timer display will show “E1”, and all loads will stop operating. It will return to off mode after 1 minute, and the display will continuously show the residual heat warning symbol “H” for the cooking zone that is under residual heat protection.

Guide to the use of ceramic hobs

• The first few times the hob is used, it may give off an acidic, burning smell. This odour will disappear completely with repeated use.
• The positions from which the heat will radiate are clearly marked on the hob. Cooking utensils must be placed exactly over these areas for effective heating to take place. Cooking utensils must have the same diameter as the cooking zone in which they are used.
• Do not use cookware with a rough base, as this may scratch the ceramic surface.
• Before using the cookware, make sure that the base is clean and dry.
• When cold, the bottom of the cookware should be slightly concave, as when hot it will expand and lie flat on the surface of the hob. This will allow heat to be transferred more easily.
• The best thickness for the bottom of the cookware is 2 – 3 mm for enamelled steel and 4 – 6 mm for stainless steel with sandwich bottom.
• Failure to follow these recommendations will result in a large loss of heat and energy. Heat not absorbed by the cookware will spread to the hob, frame, and surrounding cabinets.
• It is preferable to cover the cookware with a lid in order to be able to cook at a lower temperature.
• Always cook vegetables, potatoes, etc. in as little water as possible to reduce cooking time.
• Food or liquids with a high sugar content can damage the hob if they come into contact with the surface of the glass ceramic hob. Splashes should be wiped up immediately, although this will not prevent damage to the surface of the plate.

Important
The surface of the ceramic hob is resistant; however, it is not unbreakable and can be damaged. Especially if sharp or hard objects are allowed to fall on it with some force.

 CLEANING AND MAINTENANCE

• Let the hob cool down before cleaning it.
• The appliance must be disconnected from the mains before cleaning.
• Cleaning agent residues left on the surface of the ceramic hob can damage it. Remove residues with lukewarm water mixed with a little liquid detergent.
• Abrasive cleaning agents or sharp objects damage the hob surface; clean it with lukewarm water mixed with a little liquid detergent.
• You may find it easier to clean up some food residues while the surface of the hob is still  hot. However, you must be careful not to burn yourself if you wipe the surface of the hob while it is still hot.

After each use

• Wipe the hob with a damp cloth.
• Wipe the surface dry with a clean cloth.

Cleaning chart

Type of residue| Remove immediately?| Remove when the appliance has cooled down?| What should I use to remove the residue?
---|---|---|---
Sugar or sugar-containing foods/liquids| Yes| No| Ceramic scraper
Aluminium or plastic foil| Yes| No| Ceramic scraper
Oil/grease splashes| No| Yes| Cleaner for ceramic hobs
Metal discolouration| No| Yes| Cleaner for ceramic hobs
Splashes or water rings| No| Yes| Cleaner for ceramic hobs

Important
The hob surface should only be washed with lukewarm water and a little liquid detergent.
Warning

• Make sure the hob is clean: a dirty area does not transfer all the heat.
• Protect the hob against corrosion.
• Unplug the hob from the mains.
• Do not leave kitchen utensils unattended on the hob; hot fat can ignite spontaneously.

Important
If your appliance is not working properly, please contact Cecotec.

TROUBLESHOOTING

• Do not try to repair the appliance by yourself.
• Please note that if a technician is called out while the product is under warranty and it is discovered that the problem is not due to a fault with the appliance, you may be liable for the cost.
• The appliance must be accessible so that the technician can carry out the necessary repairs. If your appliance is installed in such a way that the technician fears damage to the appliance or your kitchen, he will not carry out the repair.

Warning

• Make sure the hob is clean: a dirty area does not transfer all the heat.
• Protect the hob against corrosion.
• Unplug the hob from the mains.
• Do not leave frying pans with fat and oil dishes unattended on the hob; hot fat can ignite spontaneously.

TECHNICAL SPECIFICATIONS

• Product reference: 02852
• Product: Bolero Squad V 3001
• Rated voltage: 220-240 V~
• Rated frequency: 50/60 Hz
• Rated power : 5700 W

| Symbol| Value| Unit
---|---|---|---
Model identification| | 02852|
Type of ceramic hob| | Electric|
Number of cooking zones| | 3|
Heating technology (induction hotplates and cooking

zones, radiation hotplates, solid hotplates)

| | Panel heater|
| Symbol| Value| Unit
---|---|---|---
For circular cooking spots or cooking zones: diameter of the usable area of each electric cooking spot, rounded to the nearest 5 mm| Ø(1)| 20.0| cm
Ø(2)| 16.5| cm
Ø(3)| 30.0| cm

(*) Calculated according to the performance measurement method (EN 60350-2).

1. Cooking zone 1
2.  Cooking zone 2
3.  Cooking zone 3
   Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

• This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
• Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
• Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

• Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
• It is recommended that repairs be carried out by qualified personnel.
• If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>