ROCKROSE Gravity 10S Vent Mount Wireless Charger User Manual
- June 6, 2024
- ROCKROSE
Table of Contents
ROCKROSE Gravity 10S Vent Mount Wireless Charger
Notes:
- DO NOT handle the car mount charger with excessive pressure or force
- DO NOT use the wireless charger under severe high temperature, or in humid or corrosive environment to avoid damaging the device’s circuit
- DO NOT place any objects between your device and the charger, including metal pads, credit cards, door keys, coins, NFC cards, or other metal objects, as these foreign objects will make wireless charging fail and/or cause overheating.
- Charging your device wirelessly could fail if:
– using a phone case with a magnetic/metal plate
– using a thick (>5 mm) protective phone case
Product Overview
Congratulations on your purchase of Gravity 10S fast-charging vent mount wireless car charger, featuring 10W max wireless output, retractable phone holder brackets, infrared & touch sensor, and 10W/7.5W/5W compatibility.
WHAT’S IN THE BOX
- User manual x1
- Gravity 10S x1
- 100cm charge-only cable with USB-C connector x1
Instructions
PHONE HOLDER ADJUSTMENT
Press and hold the adjustment button located at the bottom of the charger and
move left and right to adjust the holder brackets into best suitable position
to securely hold your phone.
LED INDICATOR
The LED indicator is lit green and then turns to constant orange when Gravity
10S is connected to a car charger.
Place your phone on the charger to start wireless charging.
The LED indicator starts pulsating green light during charging.
The LED indicator flashes orange light rapidly when an error occurs.
SPECIFICATIONS
- Model Name: Gravity 10S
- Model No.: RRWC02
- Input: 5V⎓2A 9V⎓1.67A (Type-C)
- Wireless Output: 5V⎓1A 7.5V⎓1A 9V⎓1.12A
- Output Power: 10W Max
www.rockrosetech.com |
info@rockrosetech.com
Designed by Rockrose L.A. Made in China