SEALEY LED316 5W COB and SMD LED Rechargeable 3 in 1 Inspection Light Instruction Manual
- June 17, 2024
- SEALEY
Table of Contents
SEALEY LED316 5W COB and SMD LED Rechargeable 3 in 1 Inspection Light
Instruction Manual
MODEL NO: LED316
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction manual
1. SAFETY
2. INTRODUCTION
5W COB LED Directional light, 3W SMD LED front torch, 3W COB LED front strip lighting and strobe effect. Also featuring 180° rotational stand, magnet, hook and clip for multiple uses. Supplied with Micro USB charging lead. Maximum of 300 lumens and 7 hour run time. Li-ion battery with charge indicator.
3. SPECIFICATION
IMPORTANT WARRANTY INFORMATION
The battery fitted to this lamp is considered to be a consumable item and its
ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period
of one year – this DOES NOT cover fair wear and tear.
If the battery is not properly charged before first use, or regu larly
conditioned, its capacity will diminish. Under these circumstances we will not
replace the battery regardless of whether it is less than one year old.
4. OPERATION Refer to fig.1
4.1. Connect the USB lead to the socket on the rear of the lamp. Plug USB lead
into a power supply and turn on.
4.2. When the battery has fully charged the LEDs will turn GREEN.
4.3. Direct the lens away from your eyes before switching on.
4.4. Toggle the lamp between the end light and the two side lights using the
mode selector switch (fig.1).
4.5. The lamp may be suspended by the hook or attached to any ferrous surface
by using the magnet.
5. MAINTENANCE
5.1. Keep the torch clean by wiping with a damp cloth.
5.2. Store torch in a dry childproof area.
LimitedWEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling
information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd
are required to inform potential purchasers of products containing batteries
(as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer
Registration Number (BPRN) is BPRN00705.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve
the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534
sales@sealey.co.uk
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>