Ambient Weather AWN Solar Powered Wi-Fi Weather Camera Instructions
- September 5, 2024
- ambient weather
Table of Contents
Ambient Weather AWN Solar Powered Wi-Fi Weather Camera
Product Information
Specifications:
- Product Name: AWN AMBIENTCAM2 Solar-Powered Wi-Fi Weather Camera
- Power Source: Solar
- Connectivity: Wi-Fi
- Compatibility: PC/Mac
Product Usage Instructions
Installation and Setup:
- Position the Wi-Fi antennas upright when indoors near a PC/Mac.
- Do not insert a micro SD card if you want the camera to connect to AWN.
- Visit https://ambientweather.com/ambcamsetup.html and download the setup file for PC or Mac. Install the downloaded file.
- Open the Video Management Software (VMS) by double-clicking the icon on your desktop.
- Create an account, select Cloud, and sign up. Confirm your account via email.
- Click ‘Add Device’ and connect the camera to Wi-Fi by entering your Wi-Fi name and password.
- Turn on the camera, point it at the QR code on the screen to establish a connection.
- Add a username and password for the camera, then click Create.
- Configure the camera to connect to AWN by selecting Detector in Device Settings and entering the MAC address.
Mounting:
Refer to the manual for advice on mounting the camera outside after completing the setup process.
FAQ
- Q: What should I do if I do not hear a voice stating “Ready for Wi-Fi configuration” when turning on the camera?
- A: If you do not hear a voice, the battery may need to be charged. Plug the camera into the provided wire to charge it fully before proceeding with the setup.
- Q: How can I contact customer support for further assistance?
- A: For email support, contact support@ambientweather.com. For technical support, call 480-346-3380 (Monday to Friday, 8am to 4pm Arizona Time).
AWN AMBIENTCAM2
Solar-Powered Wi-Fi Weather Camera While indoors and near a PC/Mac, position the Wi-Fi antennas upright.
NOTE: If a micro SD card is installed, the camera will not connect to AWN. Please do not insert one.
Before mounting Step
We suggest completing Steps 1–14 indoors before mounting the camera.
-
Download the VMS software from AmbientWeather.com
(https://ambientweather.com/ambcamsetup.html) for either a PC or MAC. Double-click downloaded file to install. -
If presented with a security tab, select “More info,” then “Run anyway”.
-
Open the VMS by double-clicking this icon that is now on your desktop. If presented with a tab asking you to allow the app to make changes to device, click yes.
-
When opening the VMS software you’ll be asked to create an account. Select Cloud and sign up on the next window. You will receive a confirmation email to confirm your account. Once registered and confirmed, open the app again and click Login.
NOTE: Be sure to save all usernames and passwords during this process. -
Click “Add Device” button on the top left of the window. In the panel that opens, click “Connect the camera to Wi-Fi.”
-
In the next panel, enter your Wi-Fi name and password then click “next.” A QR Code will appear.
-
Open the rubber protective seal on the back of the camera and turn it on. When you do, you will hear a voice stating, “Ready for Wi-Fi configuration.”
-
If you do not hear a voice, the battery may need to be charged. Plug the camera into the wire protruding from the camera. Be sure to fully seat the connector until it clicks.
-
Point the camera at the QR code on your screen. It will beep and confirm connection. Click “confirm” on the QR screen.
-
Select the camera on the “Add Device” screen and click “Add” in the lower part of the screen.
-
Choose and enter a username and password for the camera then click “Create.” Once the camera connects, it will indicate success and you may click “Cancel” on the “Add device screen”
-
Now that your camera is added, select the camera under “My Device” and click the Settings Icon. Then click “Setup.”
-
To connect to AWN, select “Detector” in Device Settings, then “AWN Station MAC.” Enter the MAC address for your console/ObserverIP/WeatherHub. You may now exit the VMS software and mount your camera outside. Refer to manual for advice on mounting.
-
When you access your dashboard on AWN, your image will be seen inserted into the map view.
ADDITIONAL INFORMATION
For additional product information, documentation, and downloads, please scan this QR code to access the downloads page.
CUSTOMER SERVICE
Email Support:
Technical Support:
480-346-3380 (M-F 8 am to 4pm Arizona Time)