Pyle PLBAS102LE Dual Bass Subwoofer User Guide
- June 4, 2024
- Pyle
Table of Contents
Pyle PLBAS102LE Dual Bass Subwoofer
Specification
- Brand Pyle
- Model Name PLBAS102LE
- Speaker Type Subwoofer
- Mounting Type Truck Audio
- Color Black
- Product Dimensions 7 x 11.8 x 13 inches
WIRING CONNECTION
Power amplifier for schematic diagram.
-
Positive pole
Connect +12V and Rem. in parallel -
Negative pole
connect to GND
REMOTE CONTROL FEATURES
- Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
- 2/9. Dynamic Mode button: Switch from dynamic mode to color mode or switch between dynamic modes.
- 3/8. Dynamic Mode Speed button: Use these buttons to adjust the dynamic mode speed. If the unit is in static mode, pressing these buttons will switch the unit to dynamic mode.
- 4/5. Static Color Adjust button: Use this button to swit h between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
- 6/7. Brightness Adjust button: Pressing these buttons will adjust brightness while in static mode. If these buttons are pressed while unit is in dynamic mode, it will switch to static mode.
- Demo Mode button: This button will switch the unit into demo mode.
While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
Product Description
Built-in Illuminating LED Lights – Class-D Powered Enclosure Amplifier – 10-inch 500 Watt Slim Mount Truck Audio Subwoofer Box – Rear Vented Design – High Powered 10-inch Woofers with a Silver Paper Cone – Rubber Edge Suspension – Smooth Carpet Finish – 4 Layer Dual Voice Coil – Binding Post Connectors – Perfect for Truck and Behind the Seat – High-Quality Construction What’s in the Box: – Subwoofer Box – LED Remote Control – Output Wire for Amplifier Technical Specs: – Construction Materials: 15mm Particle Board + Multilayer Board – Power Rating: 2×500 Watts Max Power – Voice Coil: 2.0” – Impedance: 4 Ohms – Magnet: 2×40 Oz – Sensitivity: 91 dB – Frequency Response: 35-600 Hz – Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries – Battery Type: 3V Lithium Battery – Battery Life: Up to 2+ Hours – Product Dimensions (L x W x H): 30.7” x 11.8” x 13.0” –inches.
PLBAS102LE 10” Dual Bass Subwoofer Box System
Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs
- Construction Materials: 15mm Particle Board + Multilayer Board
- Power Rating: 2×500 Watts Max Power
- Voice Coil: 0”
- Impedance: 4 Ohms
- Magnet: 2×40 Oz
- Sensitivity: 91 dB
- Frequency Response: 35-600 Hz
- Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
- Battery Type: 3V Lithium Battery
- Battery Life: Up to 2+ Hours
- Product Dimensions (L x W x H): 7” x 11.8” x 13.0” –inches
California Prop 65 Warning
Warning
This Product contains Nickel carbonate which is known to the state of the
California to cause cancer birth defects and other reproductive harm. Do not
ingest.
For more information go to: www.P65warning.ca.gov
Support
Questions? Issues? We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
FAQs
How long is the break in period for a Pyle subwoofer?****
We recommend a solid break in time of 20–24 hours. Overnight, you can set it up with a strong, clear signal. Once this is done you are ready to install and be on your way.
Why is my powered Pyle subwoofer not working?****
If your subwoofer stopped working, the first thing you should do is check the fuse. Replace it if it is blown and check to see if the issue is resolved. If it doesn’t, then there may be something else wrong with the subwoofer and you’ll need to take it to a technician for repair.
Why is my Pyle subwoofer not hitting as hard as it should?****
There are many reasons why your subwoofer isn’t hitting high bass. one among the most common reasons is that you’re not giving it enough power. Other possible issues: the top unit might be faulty, otherwise you have a grounding issue.
How do you know if your Pyle subwoofer is burnt out?****
Burning voice coil smells like burning rubber or tire, and it’s very pungent. If you smell this, your voice coil is perhaps burning and you will need to check it out.
Can a Pyle subwoofer catch fire?****
Prolonged continuous operation of an amplifier, speaker, or subwoofer during a distorted, clipped or over-powered manner can cause your sound system to overheat, possibly catching fire and leading to serious damage to your components and/or vehicle.
What causes a Pyle subwoofer to get hot?****
When clipping is present the subwoofer moves but normal due to the plateaus in the waveform and in turn causes excess heat to build up. Over time this excess heat causes the voice coil to interrupt down and eventually fail.
What wattage Pyle subwoofer should I get?****
As a general rule of thumb, it’s best to go with at least 300 watts in order to get enough power for your subwoofer. you’ll always add more speakers if you want, but it’s important that the amp matches the speaker system as well.
Which way should a Pyle subwoofer face?****
Most bass enthusiasts face their subwoofers to the rear , pointing at the rear of the cab in a truck or the tailgate in an SUV for a heavy bass sound and feel. Other configurations also are possible but will affect the sensation and sound of the bass.
How can I make my Pyle subwoofer sound better?****
It is suggested that for optimal quality sound, you ought to place your subwoofer within 8-12 inches of a wall, facing outwards towards the remainder of the room. For even more output, consider placing your subwoofer within the corner of your room, because it can significantly increase the overall sound due to the positioning.
How do you know if a Pyle subwoofer is broken?****
After the subwoofer is correctly broken in, you’ll notice it plays deeper, with more dynamic range, and increased output. What’s physically happening to the sub is that the resins in the spider pack begin to break apart and soften.
Is it normal for a Pyle subwoofer magnet to get hot?****
USA made coils can handle about 500 degrees F before failure. Most coil driven sub-woofers are but 1% efficient — so for example, with 1,000 watts of input, you’ve got 990-watts of heat. So heat is normal.
What size subwoofer is best for bass?****
A 12-inch subwoofer is understood for generating extra bass production with decent bass response Overall the sound quality is not sacrificed, but if you’re playing your sub at peak power your system will suffer. it’s always recommended to use the RMS Wattage to best utilize your woofer.
Should my Pyle subwoofer be on the floor?****
There’s a reasonable chance that elevating a subwoofer will improve sound, and a subwoofer sitting on a floor can cause issues anyhow, so it’s worth a minimum of considering. But a subwoofer sitting on the ground can be optimal too.
Can you lay a Pyle subwoofer on its back?****
A down-firing subwoofer can’t be put on its side. Because the speaker must face the floor, it cannot work properly on its side. However, down-firing speakers shouldn’t have to be set up where space is an issue. they’re designed to be near the listening area, not inside a console.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>